Table of Contents
index
- .wav format 6-2
- Accepting Nodes 5-8
- ad hoc 1-3
- audio transcoding
- setting priority 5-10
- Bonding Parameters 5-12
- Bonding Parameters option
- enable bonding 5-13
- Max. Call Bandwidth 5-13
- Calling Services 7-1
- calls
- problems making 8-10
- problems receiving 8-7
- status information 9-16
- Call Type 5-16
- cascading 1-3
- CCITT µ-Law 6-5
- Cisco Connection Online (CCO) xix
- Cisco documentation CD-ROM xix
- Cisco IPVC Message Recording Utility 6-2
- Admin 6-2
- Attributes 6-5
- Audio Properties 6-5
- Create Recording 6-5
- Express Setup 6-2
- Preferred quality 6-5
- Replace Recordings 6-6
- Welcoming 6-6
- Cisco Multimedia Conference Manager
- MCM A-1
- conference ID 1-3
- configuration software
- navigation buttons (table) 4-4
- configuration software buttons 4-4
- Configuration Source 5-24
- configuration station requirements 4-2
- console port
- connection problems 8-4
- Create Message 6-5
- Create Recording 6-5
- Default Extension 5-22
- Default Extension for Indirect Dial 7-7
- details of specific endpoints 9-14
- Diagnostics utility
- Country Code 9-10, 9-11
- NT/TE 9-10, 9-11
- Physical Interface 9-10, 9-11
- Wire Type 9-10, 9-11
- dialing plan 5-2
- dial pad 6-1
- DID (Direct Inward Dialing) 1-5
- Discovery Multicast Address B-8
- document
- audience xiii
- objectives xiii
- organization xiv
- DTMF 1-6, 6-1
- Dual Tone Multi-Frequency 1-6
- early connect timeout 9-22
- EIA/TIA standards 1-4
- embedded gatekeeper B-1
- Accept Calls B-7
- Accept Registration B-7
- Advanced Settings B-8
- Alias Assignment B-7
- Application Parameters B-4, B-27
- Call Indirect B-7
- Default Distance B-9
- Dynamic IP Environment B-7
- Everyone Can Register B-7
- Factory Default B-10
- Gatekeeper Setup B-4, B-27
- GK On B-6
- Max. Bandwidth B-8
- Max. Bandwidth per Terminal B-8
- Max. Number of Calls B-7
- Multicast Distance B-9
- NetWork Controls B-5
- predefined services 7-7
- Unregister All B-7
- Unregistration Timeout B-7
- Unresponsive Timeout B-9
- endpoint
- diagnostic information 9-13
- Fast Connect 9-22
- Gateway calls, status information 9-12
- Gateway ports
- configuration information 9-8
- status information 9-7
- gateway services
- defining 5-14
- H.323 components
- gatekeepers 1-2
- gateways 1-3
- MCU
- 1-2
- terminals 1-2
- installation
- power cable 3-6
- installing
- the Gateway 3-2
- Interactive Voice Response 1-6
- internal IVR system 6-1
- IVR 1-6, 5-22
- IVR Indirect Dial 7-5
- IVR message files 6-2
- IVR message limit 6-5
- IVR operator 6-2
- keyboard 6-1
- keypad 6-1
- LAN port
- location 1-8
- LAN Port Connections 1-9
- LEDs
- colors 1-6
- indications 1-6
- using for problem solving 8-2
- list of endpoints 9-13
- load balancing 1-3
- Max Bit Rate 5-16
- MCM command
- gatekeeper A-2
- zone local A-2
- zone prefix A-2
- MCU 1-2
- Miscellaneous Parameters option
- Internal IVR Service 5-11
- IVR Operator 5-11
- Second Number Delimiter 5-11
- Transcoding Priority 5-10
- monitoring, the Gateway 9-1, 9-5
- mounting kit 3-4
- MSN 5-22
- MSN Direct Dial 7-4
- Multiple Subscriber Numbering 5-22
- multipoint controller (MC) 1-2
- multipoint control unit 1-2
- multipoint processor (MP) 1-2
- Neighbor Gatekeeper Parameters screen B-21
- neighbor gatekeepers
- defining B-20
- deleting B-22
- editing B-21
- Neighbor Gatekeepers Table
- screen B-19
- neighbor zone 9-17
- network terminator 5-18
- notes, usage in text xvi
- Opening Sound 6-3
- Operator recording 6-3
- option
- call 9-16
- Date/Time 5-9
- list call 9-15
- package contents 3-2
- password 9-23
- Placing Basic Calls 7-2
- Placing Calls on 2B ISDN Lines 7-3
- Plug & Play 5-8
- port
- external IVR 5-11
- power
- cable connection 3-6
- socket and switch location 1-8
- Prefix 5-16
- PRI cable kit 3-1
- PRI WAN Port LED Alarms 1-10
- proxy B-25
- Remote Diagnostic Main Menu 9-6
- Remote Diagnostics Utility 9-1, 9-5
- Replace Recordings 6-6
- safety warnings xvi
- Save Setup 5-23
- second number delimiter, defining 5-11
- Serial Port 1-8
- Services Definition Table
- Call Type 5-16
- Max.Bit Rate 5-16
- Prefix 5-16
- Restricted Mode 5-16
- Services Definition table 5-14
- service settings 5-15
- setting Bonding Parameters 5-12
- Site Requirements 3-1
- SNMP, error message 8-3
- source
- set 5-8
- Source file
- Plug & Play 5-8
- stacking 1-3
- T.120 9-25
- TCS4
- number delimiter 5-11
- TCS4 Direct Dial 7-5
- Terminal/Modem cable 3-1
- terminal emulator
- Configuration Menu 9-20
- Remote Diagnostic Main Menu 9-19
- terminal equipment 5-18
- transcoder ports 1-5
- TSC4 5-22
- Unit Identification screen 5-9
- upgrading
- the Gateway version E-1
- utilities
- Remote Diagnostics 9-1, 9-5
- WAN ports
- location 1-8
- WAN Port Settings - ISDN PRI 5-16
- Advanced Settings 5-19
- Country 5-18
- Enable 5-17
- Framing 5-20
- Line Coding 5-20
- Network Access 5-18
- Phone Number 5-17
- Physical Line Configuration 5-17
- Range 5-17
- Signaling Protocol 5-18
- Signaling Type 5-20
- Supported Services 5-22
- WAN Call Parameters 5-21
- zone parameters 9-18
- zone prefixes 7-9







Posted: Mon Jun 5 12:42:02 PDT 2000
Copyright 1989 - 2000©Cisco Systems Inc.