Table of Contents

Cisco IP/VC 3525 Gateway
Agency Compliance

Hardware Specifications

This appendix lists the hardware specifications for the Cisco IP/VC 3525 Gateway, and includes the following sections:

• Cisco IP/VC 3525 Gateway

• Agency Compliance

Cisco IP/VC 3525 Gateway

10/100BASE-T, IEEE 802.3 Ethernet, half-duplex, 8-pin, RJ-45

ISDN E1/T1 interfaces, RJ-45 nonstandard connector

Terminal port for out-of-band remote diagnostics and remote configuration, 9-pin, D-type connector

Standard mode: 64 kbps, 2¥64 kbps, 384 kbps
Restricted mode: 56 kbps, 2¥56 kbps, and 336 kbps

G.711, G.728, G.723.1

H.261

T.120

AT&T 5ESS and 5ESS Point-to-Point, Northern Telecom DMS 100, National ISDN-2 (NI-2), NTT, ETSI and Euro-ISDN

G.711/G.728, G.723.1/G.711

T1 mode: 23B+D, clock rate of 1.544Mbps, ESF or F4 framing, B8ZS or AMI encoding, line impedance 100 Ohms.

E1 mode: 30B+D, clock rate of 2.0484Mbps, G.704 with CR4C framing, HDB3 or AMI encoding, line impedance 120 Ohms

1.75 in. (4.3 cm)

17.0 in. (43.2 cm)

13.8 in. (35.0 cm)

5.5 lbs (2.5 kg)

300W

115/230 VAC

60/50 Hz

7.0/3.5 Amps

0 to +40°C
(32°F to +104°F)

-25°C to +70°C
(-13°F to +158°F)

15% and 85% noncondensing

Agency Compliance

The IP/VC 3500 Series Servers have the following agency approvals:

CE marking
UL 1950
CSA C22.2 No.950
EN60959IEC950

FCC Part 15 (CFR 47) Class A
CISPR22 Class A
EN55022 Class A
AS/NZS 3548 Class A
VCCI Class A

FCC Part 68 (CFR 47)
CTR 4

Posted: Mon Jun 5 12:37:03 PDT 2000
Copyright 1989 - 2000©Cisco Systems Inc.