Table of Contents
index
- about this guide xiii
- ad hoc 1-3
- advanced settings B-8
- agency compliance C-3
- audience xiii
- audio transcoding
- setting priority 5-11
- bonding 5-13
- cable
- proprietary D-2
- Terminal/Modem 3-3
- cable connectors and pinouts D-1
- calling services 7-1
- calls
- problems making 8-9
- problems receiving 8-7
- status information 9-16
- cascading 1-3
- CCO
- Cisco Connection Online xix
- Cisco Connection Online (CCO) xix
- Cisco documentation CD-ROM xix
- conference ID 1-3
- configuration software
- navigation buttons (table) 4-4
- configuration software buttons 4-4
- configuration station requirements 4-2
- configuration utility
- accessing gatekeeper B-4
- configuring
- video gateway 5-1
- console port
- connection problems 8-3
- Default Extension 5-5
- default extensions for indirect dial calls 7-7
- default router 5-11
- definition table B-24
- deleting
- endpoints B-18
- details of specific endpoints 9-14
- diagnostics 9-6
- dialing into the LAN from WAN terminal 7-4
- dialing plan 5-2
- DID (Direct Inward Dialing) 1-5
- Discovery Multicast Address B-8
- document
- audience xiii
- conventions xv
- objectives xiii
- organization xiii
- documentation CD-ROM xix
- DTE 1-11, 1-12
- E.164 address 5-4
- early connect timeout 9-22
- EIA/TIA standards 1-4
- embedded gatekeeper
- Accept Calls B-7
- Accept Registration B-7
- Alias Assignment B-7
- Application Parameters B-27
- Call Indirect B-7
- configuring B-1
- Default Distance B-9
- Dynamic IP Environment B-7
- Everyone Can Register B-7
- Gatekeeper Setup B-27
- Max. Bandwidth B-8
- Max. Bandwidth per Terminal B-8
- Max. Number of Calls B-7
- Multicast Distance B-9
- predefined services 7-7
- Unregister All B-7
- Unregistration Timeout B-7
- Unresponsive Timeout B-9
- Enable Bonding 5-13
- enabling the gatekeeper B-5
- endpoint
- diagnostic information 9-13
- endpoint requirements 6-1
- external IVR 5-11
- factory defaults B-10
- Fast Connect 9-22
- field
- Default B-12
- Public B-12
- forward service 7-7
- front panel 1-7
- gatekeeper
- default 5-10
- port 5-10
- gatekeeper parameters
- setting B-3
- Gateway calls, status information 9-12
- Gateway ports
- configuration information 9-8
- status information 9-7
- gateway services
- defining 5-14
- group hunting services B-18
- H.323 components
- gatekeepers 1-2
- gateways 1-3
- MCU
- 1-2
- terminals 1-2
- hardware specifications C-1
- installation
- power cable 3-7
- installing
- the Gateway 3-2
- Interactive Voice Response
- IVR 5-4
- interactive voice response
- IVR 5-11
- internal voice recording system 6-1
- introduction 1-1
- IP address 3-3
- ISDN interface D-1
- ISDN Layer 1
- US ISDN 9-24
- ISDN switch type 9-23
- Island Code B-24
- IVR 6-1
- IVR indirect dial 7-5
- IVR operator 5-11
- LAN port
- location 1-8, 1-9, 1-10, 1-11, 1-12
- LED indications 8-1
- LEDs
- colors 1-7
- indications 1-7
- LAN link 1-7
- Power 1-8
- Self Test 1-8
- using for problem solving 8-1
- WAN 1-7
- list of endpoints 9-13
- load balancing 1-3
- local zone A-2
- Max Call Bandwidth 5-13
- MCU 1-2
- miscellaneous parameters 5-10
- Miscellaneous WAN Parameter 5-12
- monitoring, the Gateway 9-1, 9-5
- mounting kit 3-4
- MSN direct dial 7-4
- Multiple Subscriber Numbering
- MSN 5-4
- multipoint controller (MC) 1-2
- multipoint control unit 1-2
- multipoint processor (MP) 1-2
- Neighbor Gatekeeper Parameters screen B-21
- neighbor gatekeepers B-19
- defining B-20
- deleting B-22
- editing B-21
- Neighbor Gatekeepers Table
- screen B-19
- neighbor zone 9-17
- network topology B-22
- no-answer service
- using forward 7-9
- notes, usage in text xvi
- null modem cable D-3
- on-line help xix
- option
- call 9-16
- list call 9-15
- package contents 3-2
- parallel dialing 5-12
- password 9-23
- Plug & Play 5-8
- port
- external IVR 5-11
- gatekeeper 5-10
- power
- cable connection 3-7
- socket and switch location 1-8, 1-9, 1-10, 1-11, 1-12
- voltage 1-10, 1-11, 1-12, 1-13
- predefined services
- editing and enabling B-13
- presentation restriction 5-11
- proxy B-25
- rear panel 1-9, 1-10, 1-11, 1-12
- registering endpoints B-14
- manually B-15
- viewing and editing B-18
- registering services B-10
- registering with MCM gatekeeper A-1
- Remote Diagnostic Main Menu 9-6
- Remote Diagnostics Utility 9-1, 9-5
- safety warnings xvi
- second number delimiter 5-11
- serial connector D-3
- service prefix 5-3
- setting gatekeeper parameters B-3
- setting network controls B-5
- SNMP, error message 8-3
- source
- set 5-8
- Source file
- Plug & Play 5-8
- stacking 1-3
- syntax conventions xv
- T.120 9-24
- TCS4 5-4
- number delimiter 5-11
- TCS4 direct dial 7-5
- terminal emulator
- Configuration Menu 9-20
- Remote Diagnostic Main Menu 9-19
- troubleshooting tips 8-1
- Unit IP 5-5
- upgrading
- the Gateway version E-1
- uploading files to video gateway E-1
- uploading file to memory 5-29
- Upload utility
- using E-1
- utilities
- Remote Diagnostics 9-1, 9-5
- video gateway
- using 7-1
- video gateway services 5-14
- WAN Call Parameter 5-20
- WAN port parameters 5-17
- WAN ports
- location 1-8, 1-9, 1-10, 1-11, 1-12
- window
- Configuration Source 5-8
- LAN Port Settings 5-13
- Miscellaneous Parameters 5-10
- Services Definition Table 5-14
- Unit Identification 5-9
- Unit IP 5-5
- WAN Port Settings 5-17, 5-24
- WAN Port Settings - ISDN 5-17
- zone 5-3
- zone definition table B-15
- zone parameters 9-18
- zone prefix 5-3
- zone prefix 1 B-10
- zone prefixes 7-9







Posted: Mon Jun 5 12:29:59 PDT 2000
Copyright 1989 - 2000©Cisco Systems Inc.