|
|
This appendix describes a subset of commands for the Cache Engine console command line. Each command is case sensitive and should be entered as is documented in this appendix. Only the commands documented here are supported by Cisco Systems, Inc.
The CacheConfigShow command displays basic management settings and software version information.
CacheConfigShow-> CacheConfigShow
Software Configuration for Cache Engine Config Version = 2 Time = 12:02:25, Date = 08/28/1998 Network IP Address = 10.1.9.7 Netmask = 255.255.255.0 WCCP Host Router = 10.1.9.0 Default Gateway = 10.1.9.0 Cache Engine Name = CE Cache Farm Name = My Farm DNS Domain Name = domain.net Server #0 = 10.1.9.1 Server #1 = 10.1.9.2 Freshness Factor Text Multiplier = 0.10 Other Multiplier = 0.30 Cookie caching is OFF Filters URL BLOCKING is NOT ENABLED value = 1 = 0x1
The message "value = 0 = 0x1" displays to indicate that the command display is complete.
The CPU_UsageShow command displays average CPU utilization from the last one second and the last ten seconds.
CPU_UsageShow-> CPU_UsageShow
CPU Utilization: OneSec: 1 TenSec 1 value = 0 = 0x0
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
The DiagDump command displays the Cache Engine's usage statistics.
DiagDump ["disk" | "buffer" | "all"]| Variable | Description |
|---|---|
"disk" | Disk statistics for all partitions. Options include:
|
"buffer" | Buffer statistics for all drives. Options include:
|
"all" | All usage statistics for the Cache Engine. |
-> DiagDump "all"
THU DEC 28 12:10:26 1998
General Stats
Collecting Stats for 68821 seconds
Ready=900 MaxUsed=124 Hit-Bytes=99592K Miss-Bytes=129970K
Requests=24506 Hits=5738 Misses=18656 BadConnects=2309 Nearhits=109
Disk Stats For All Partitions
Creates=3463 Opens=6502 Closes=10062 Deletes=169
Reads=39550 Writes=49697 Stats=8142 Free=24080922K
Wraps=0 OverWrites=41 TruncatesReads=0
InodeErrors=0 CrcErrors=39 DirCollisions=0
Buffer Stats For All Drives
Hits=99633 Misses=10648
Writes=14997 Reads=10648
WriteErrors=0 ReadErrors=0 SeekErrors=0
value = 0 = 0x0
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
See the Table 4-4 through Table 4-6 in "Optimizing the Cache Engine" for a description of the statistical terms.
The DirectoryDump command displays the drive's partition contents on your console. Each Cache Engine contains 15 partitions [numbered from zero (0) to fourteen (14)].
| Variable | Description |
|---|---|
"partition" | Contents of an individual partition number 0 through 14. For example, DirectoryDump "1" |
"all" | Contents of all partitions |
 | Caution Issuing the DirectoryDump command with the "all" parameter is very time-consuming. A fully populated Cache Engine may contain up to 24 GB of data. The "all" parameter will display (and occupy) your console until all data has been dumped. The only way to stop the data dump is to reboot your Cache Engine. |
See the "Updating the Basic Configuration" section in "Managing the Cache Engine," for console rebooting instructions.
-> DirectoryDump "all"
Directory for Partition 0 Directory for Partition 1 #1 Inode at 1000 http://www.domain.com/images/store_special.gif lLength=1370 Directory for Partition 2 Directory for Partition 3 #3 Inode at 1000 http://www.domain.com/inserts/images/marc_hp.gif lLength=220 0 #3 Inode at 1898 http://www.domain.com/images/rule_grn.gif lLength=637 #3 Inode at 1B15 http://www.domain.com/inserts/images/marc_hp.gif lLength=220 0 Directory for Partition 4 #4 Inode at 1000 http://www.domain.com/images/bullet.gif lLength=627 Directory for Partition 5 #5 Inode at 1000 http://www.domain.com/images/footer_new.gif lLength=5229 Directory for Partition 6 Directory for Partition 7 #7 Inode at 1000 http://www.domain.com/images/banners/netscape_c0.gif lLength =17578 Directory for Partition 8 Directory for Partition 9 Directory for Partition 10 Directory for Partition 11 #11 Inode at 1000 http://www.domain.com/images/netcent.gif lLength=2215 Directory for Partition 12 Directory for Partition 13 #13 Inode at 1000 http://www.domain.com/images/download.gif lLength=2170 Directory for Partition 14 #14 Inode at 1000 http://www.domain.com/images/abcnews_3.gif lLength=8249 #14 Inode at 3039 http://www.domain.com/inserts/images/toshiba_2000ih3_brkthr u_ad.gif lLength=4578 #14 Inode at 421B http://www.domain.com/images/abcnews_3.gif lLength=8249 #14 Inode at 6254 http://www.domain.com/inserts/images/toshiba_2000ih3_brkthr u_ad.gif lLength=4578 value = 0 = 0x0
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
The DISK_UsageShow command displays your Cache Engine's average disk utilization from the last one second and the last ten seconds.
DISK_UsageShow-> DISK_UsageShow
DISK Utilization: OneSec: 0 TenSec 0 value = 0 = 0x0
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
The FSReset command flushes the Cache Engine's data.
The FSSync command ensures that the permanent directory on disk is synchronized with the running directory that was flushed by the FSReset command.
FSReset-> FSReset
Resetting 15 disks TID=7F1749C Creating file system! /raw0/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw1/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw2/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw3/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw4/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw5/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw6/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw7/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw8/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw9/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw10 [filesystem.c at 1242] TID=7F1749C Creating file system! /raw11/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw12/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw13/ [filesystem.c at 1242] TID=7F1749C Creating file system! /raw14/ [filesystem.c at 1242] value = 0 = 0x0 -> FSSync
value = 0 = 0x0
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
The inetstatShow command displays the Cache Engine's current active connections.
inetstatShow | Caution Issuing the inetstatShow command may be very time-consuming because an active Cache Engine may have thousands of connection entries. |
-> inetstatShow
Active Internet connections (including servers) PCB Proto Recv-Q Send-Q Local Address Foreign Address (state) --- ----- ------ ------ ------------- --------------- ------ 7e1a6a4 TCP 0 0 192.168.69.80 192.168.29.1568 FIN_WAIT_2 7e1a724 TCP 0 0 192.168.69.80 192.168.29.1566 FIN_WAIT_2 7e1a9a4 TCP 0 0 192.168.69.23 192.168.108.208 ESTABLISHED 7e1af24 TCP 0 0 10.0.0.0.80 10.1.9.0.10 LISTEN 7e1afa4 TCP 0 0 10.0.0.0.80 10.0.0.0.0 LISTEN 7e1b324 TCP 0 0 10.0.0.0.10 10.0.0.0.0 LISTEN 7e1b7a4 TCP 0 0 10.0.0.0.21 10.0.0.0.0 LISTEN 7e1b924 TCP 0 0 10.0.0.0.255 10.0.0.0.0 LISTEN 7e1b0a4 UDP 0 0 192.168.69.255 10.0.0.0.0 7e1b224 UDP 0 0 10.0.0.0.0 10.0.0.0.0 7e1b2a4 UDP 0 0 10.0.0.0.255 10.0.0.0.0 7e1b3a4 UDP 0 0 10.0.0.0.255 10.0.0.0.0 7e1b6a4 UDP 0 0 127.0.0.1.255 172.0.1.255 7e1b724 UDP 0 0 10.0.0.0.1 10.0.0.0.9 value = 1 = 0x1
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
The ipstatShow command displays IP error statistics.
ipstatShow-> ipstatShow
total 5851
badsum 0
tooshort 0
toosmall 0
badhlen 0
badlen 0
infragments 0
fragdropped 0
fragtimeout 0
forward 0
cantforward 0
redirectsent 0
unknownprotocol 0
nobuffers 0
reassembled 0
outfragments 0
noroute 0
value = 1 = 0x1
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
The memShow command displays current free and allocated memory.
memShow-> memShow
status bytes blocks avg block max block ------ ----- ------ --------- --------- current free 45900720 48 956265 45747008 alloc 23362448 8584 2721 - cumulative alloc 26204664 8708 3009 - value = 0 = 0x0
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
The NET_UsageShow command displays average network utilization over the previous one second and ten seconds.
NET_UsageShow-> NET_UsageShow
NET Utilization: OneSec: 0 TenSec 0 value = 0 = 0x0
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
The routeShow command displays assigned gateways and route host tables.
routeShow-> routeShow
ROUTE NET TABLE destination gateway flags Refcnt Use Interface ----------- ------- ----- ------ ------------- 10.0.10.1 10.1.9.113 101 0 0 fei0 10.0.10.1 10.1.9.104 101 0 0 fei0 10.1.19.1 10.1.9.104 101 0 0 fei0 -------------------------------------------------------------- ROUTE HOST TABLE destination gateway flags Refcnt Use Interface ----------- ------- ----- ------ ------------- 10.0.10.1 10.0.0.1 5 1 0 lo0 -------------------------------------------------------------- value = 77 = 0x4d = 'M'
The message "value = XX = 0xX" = "X" displays to indicate that the command display is complete.
The routestatShow command displays a comprehensive list of routing errors.
routestatShow-> routestatShow
routing:
0 bad routing redirect
0 dynamically created route
0 new gateway due to redirects
1 destination found unreachable
0 use of a wildcard route
value = 27 = 0x1b
The message "value = XX = 0xX" displays to indicate that the command display is complete.
The ShowSyslogSettings command displays syslog (Cache Engine system logging) settings.
ShowSyslogSettings-> ShowSyslogSettings
Syslog host is valid. Syslog Host is 172.16.21.9 Syslog Critical Event Tracking is enabled. Syslog Warning Event Tracking is enabled. Syslog Notice Event Tracking is enabled. Syslog Stat Tracking is not enabled. Syslog URL Tracking is enabled. Syslog Critical Priority = 183 Syslog Warning Priority = 191 Syslog Notice Priority = 183 Syslog Stat Priority = 0 Syslog URL Tracking priority = 191 value = 34 = 0x22=""
The message "value = XX = 0xXX = "" " displays to indicate that the command display is complete.
The tcpstatShow command displays general TCP statistics.
tcpstatShow-> tcpstatShow
TCP:
26235 packets sent
12762 data packets (10917780 bytes)
53 data packets (55168 bytes) retransmitted
11281 ack-only packets (4593 delayed)
0 URG only packet
0 window probe packet
632 window update packets
1507 control packets
22353 packets received
9577 acks (for 10747367 bytes)
741 duplicate acks
0 ack for unsent data
6754 packets (4090672 bytes) received in-sequence
37 completely duplicate packets (20272 bytes)
0 packet with some dup. data (0 byte duped)
1880 out-of-order packets (450813 bytes)
0 packet (0 byte) of data after window
0 window probe
1307 window update packets
14 packets received after close
1 discarded for bad checksum
0 discarded for bad header offset field
0 discarded because packet too short
521 connection requests
1855 connection accepts
2366 connections established (including accepts)
2375 connections closed (including 304 drops)
10 embryonic connections dropped
9907 segments updated rtt (of 10127 attempts)
132 retransmit timeouts
0 connection dropped by rexmit timeout
0 persist timeout
70 keepalive timeouts
57 keepalive probes sent
13 connections dropped by keepalive
282 pcb cache lookups failed
value = 29 = 0x1d
The message "value = 29 = 0x1d" displays to indicate that the command display is complete.
The TechSupport command displays the Cache Engine information necessary for Cisco Systems' Technical Assistance Center (TAC) to assist you with your technical support needs.
TechSupport-> TechSupport
Version: CE v1.7.0 (9-19-98) [/ata0/1_7_0.dir]
Software Configuration for Cache Engine
Config Version = 2
Time = 18:58:51, Date = 12/06/1998
Network
IP Address = 10.1.1.1
Netmask = 10.1.1.2
WCCP Host Router = 10.1.1.3
Default Gateway = 10.1.1.4
Cache Engine Name = CE
Cache Farm Name = ISP Cache Farm
DNS
Domain Name = cisco.com
Server #0 = 10.1.1.5
Server #1 = 10.1.1.6
Proxy
Acting as a Proxy Server on port 2001
Freshness Factor
Text Multiplier = 0.10
Other Multiplier = 0.25
Cookie caching is OFF
Filters
URL BLOCKING is NOT ENABLED
Syslog host is valid.
Syslog Host is 172.31.84.96
Syslog Critical Event Tracking is enabled.
Syslog Warning Event Tracking is enabled.
Syslog Notice Event Tracking is enabled.
Syslog Stat Tracking is not enabled.
Syslog URL Tracking is enabled.
Syslog Critical Priority = 183
Syslog Warning Priority = 191
Syslog Notice Priority = 183
Syslog Stat Priority = 0
Syslog URL Tracking priority = 191
CPU Utilization: OneSec: 1 TenSec 1
NET Utilization: OneSec: 0 TenSec 0
DISK Utilization: OneSec: 0 TenSec 0
memShow follows:
1 0x693e4c0 21380
2 0x7ffc8f8 44
3 0x7ffe1cc 96
4 0x7df0a54 32
5 0x7eaf278 24
6 0x7eb5480 28
7 0x7ee4d5c 16
8 0x7eb5710 16
9 0x7ead708 28
10 0x7ffcc94 16
11 0x7f3bc94 28
12 0x7edc694 20
13 0x7f3bacc 16
14 0x3dbb0f4 45626220
15 0x7ffc000 2280
16 0x7ffa000 4088
17 0x7ff8000 4088
52 0x7fb2000 4072
status bytes blocks avg block max block
------ --------- -------- ---------- ----------
current
free 45801484 52 880797 45626220
alloc 23682792 11914 1987 -
cumulative
alloc 100822036 16582 6080 -
ipstatShow follows:
total 8
badsum 0
tooshort 0
toosmall 0
badhlen 0
badlen 0
infragments 0
fragdropped 0
fragtimeout 0
forward 0
cantforward 0
redirectsent 0
unknownprotocol 4
nobuffers 0
reassembled 0
outfragments 0
noroute 0
tcpstatShow follows:
TCP:
46342 packets sent
17267 data packets (8942149 bytes)
154 data packets (116871 bytes) retransmitted
26292 ack-only packets (3959 delayed)
0 URG only packet
0 window probe packet
365 window update packets
2264 control packets
44816 packets received
13662 acks (for 7881674 bytes)
5029 duplicate acks
0 ack for unsent data
10579 packets (4395598 bytes) received in-sequence
30 completely duplicate packets (2546 bytes)
0 packet with some dup. data (0 byte duped)
1135 out-of-order packets (145185 bytes)
0 packet (0 byte) of data after window
0 window probe
1098 window update packets
116 packets received after close
0 discarded for bad checksum
0 discarded for bad header offset field
0 discarded because packet too short
1018 connection requests
6959 connection accepts
7976 connections established (including accepts)
7977 connections closed (including 2310 drops)
0 embryonic connection dropped
13979 segments updated rtt (of 18581 attempts)
137 retransmit timeouts
0 connection dropped by rexmit timeout
0 persist timeout
0 keepalive timeout
0 keepalive probe sent
0 connection dropped by keepalive
681 pcb cache lookups failed
inetstatShow follows:
Active Internet connections (including servers)
PCB Proto Recv-Q Send-Q Local Address Foreign Address (state)
--- ----- ------ ------ ------------- --------------- ------
275a9dc TCP 0 1 10.0.0.0.2101 10.1.9.0.10 LISTEN
275a95c TCP 0 0 10.0.0.0.80 10.1.9.0.10 LISTEN
275a8dc UDP 0 1 172.31.90.255 10.1.9.0.10 -
routeShow follows
ROUTE NET TABLE
destination gateway flags Refcnt Use Interface
----------- ------- ----- ------ -------------
0.0.0.0 172.71.70.129 3 6786 fei0
172.71.0.0 172.71.70.152 101 0 fei0
172.71.70.128 172.71.70.152 101 0 fei0
-------------------------------------------------------------------
ROUTE HOST TABLE
destination gateway flags Refcnt Use Interface
----------- ------- ----- ------ -------------
172.0.0.1 172.0.0.1 5 1 lo0
-------------------------------------------------------------------
routestatShow
routing:
0 bad routing redirect
0 dynamically created route
0 new gateway due to redirects
1 destination found unreachable
0 use of a wildcard route
Statistics subsystem:
Transaction Logging to local file Enabled.
LOGS directory summary
Working log lifespan is 86400 sec.
Working log is 78965 bytes and 86400 sec old.
archive.log is 76548976 bytes.
TUES DEC 17 14:00:01 1998
General Stats
Ready=900 Hit-Bytes=511000 Miss-Bytes=4041000
Requests=5972 Hits=207 Misses=5057 Nearhits=0
Disk Stats For All Partitions
Creates=166 Opens=299 Closes=468 Deletes=0
Reads=725 Writes=953 Stats=47 Free=24176722000
Wraps=0 OverWrites=0 TruncatesReads=0
InodeErrors=0 CrcErrors=0 DirCollisions=0
Buffer Stats For All Drives
Hits=15302 Misses=94
Writes=13299 Reads=94
WriteErrors=0 ReadErrors=0 SeekErrors=0
value = 0 = 0x0
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
The TeeDebugOn and TeeDebugOff commands toggle the console display of incoming and outgoing HTTP header requests (misses only) between the Cache Engine and a server.
TeeDebugOn-> TeeDebugOn
value = 0 = 0x0
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
Turn debugging off using the TeeDebugOff command.
-> TeeDebugOff
value = 0 = 0x0
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
This is sample debugging output:
GET / HTTP/1.0 Proxy-Connection: Keep-Alive User-Agent: Mozilla/3.01 (X11; I; BSD/OS 3.0 i386) Host: www.domain.com Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, * Incoming Response Buffer: HTTP/1.0 200 OK Server: Netscape-Enterprise/2.01 Date: Thu, 23 Oct 1998 18:20:49 GMT Content-type: text/html Outgoing Request Buffer: GET /images/abcnews_3.gif HTTP/1.0 Referer: http://www.domain.com/ Proxy-Connection: Keep-Alive User-Agent: Mozilla/3.01 (X11; I; BSD/OS 3.0 i386) Host: www.domain.com Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg Incoming Response Buffer: HTTP/1.0 200 OK Server: Netscape-Enterprise/2.01 Date: Thu, 23 Oct 1998 18:20:51 GMT Accept-ranges: bytes Last-modified: Thu, 23 Oct 1998 13:30:14 GMT Content-length: 7668 Content-type: image/gif Outgoing Request Buffer: GET /inserts/images/sdclick_125ih3_likxmas_ad.gif HTTP/1.0 Referer: http://www.domain.com/ Proxy-Connection: Keep-Alive User-Agent: Mozilla/3.01 (X11; I; BSD/OS 3.0 i386) Host: www.domain.com Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg Incoming Response Buffer: HTTP/1.0 200 OK Server: Netscape-Enterprise/2.01 Date: Thu, 23 Oct 1998 18:20:51 GMT Accept-ranges: bytes Last-modified: Fri, 17 Oct 1998 21:09:04 GMT Content-length: 4007 Content-type: image/gif
The UpgradeShow command displays the directory location of the Cache Engine image and the Cache Engine version number.
UpgradeShow-> UpgradeShow
Version: CE v1.7.0 (12-19-98) [/ata0/1_7_0.dir]
The WC_ResetMother command and the unlink "basiccfg.txt" command must be used together to return the Cache Engine to its default factory settings.
WC_ResetMother-> WC_ResetMother
Unlinking /ata0/1_7_0.dir/config.cfg Unlinking /ata0/1_7_0.dir/events.dat Unlinking /ata0/1_7_0.dir/users.dat Unlinking /ata0/1_7_0.dir/radius.dat Unlinking /ata0/1_7_0.dir/dnsconf.dat value = 0 = 0x0 -> unlink "basiccfg.txt"
value = 0 = 0x0 -> reboot
The message "value = 0 = 0x0" displays to indicate that the command display is complete.
|
|