Index

index

A

AAA message 2 - 13

access denied URL 2 - 26

ActiveX object, filtering 2 - 37

address translation slots 2 - 19, 2 - 37

ARP table 2 - 16

attacks

: land.c 2 - 10
: SYN 2 - 18

Authen Session End 2 - 15

authentication

: failed 2 - 14
: request succeeds 2 - 13

Auth from IP address/port to IP address/port failed 2 - 13

authorization

: denied for user 2 - 14
: denied from address 2 - 14

Auth start for user 2 - 13

B

: beginning configuration replication 2 - 41
: broadcast, invalid source address 2 - 10
: built H245 connection 2 - 25
: built inbound TCP connection 2 - 24

C

can not specify PAT host 2 - 10

commands

: conduit 2 - 9, 2 - 11
: conduit permit icmp 2 - 10
: config 2 - 16
: configure 2 - 17
: failover 2 - 6
: failover active 2 - 5
: filter activex 2 - 37
: filter allow 2 - 27
: floodguard 2 - 14
: global 2 - 9, 2 - 28
: nat 2 - 9, 2 - 28
: no failover 2 - 6
: no failover active 2 - 5
: outbound deny 2 - 8
: reload 2 - 17
: rsh 2 - 19
: show arp 2 - 16
: show blocks 2 - 7
: show outbound 2 - 8
: show static 2 - 18
: show telnet 2 - 29
: snmp-server 1 - 9
: static 2 - 9
: sysopt connection enforcesubnet 2 - 10
: timeout uauth 2 - 15
: write 2 - 16
: write erase 2 - 16

conduit command 2 - 9, 2 - 11

conduit permit icmp command 2 - 10

config command 2 - 16

configure command 2 - 17

D

denied manager connection 2 - 30

denied Telnet login session 2 - 29

deny

: inbound from outside 2 - 9
: inbound ICMP 2 - 10
: inbound UDP 2 - 9
: inbound UDP due to query/response 2 - 9
: IP from address to address 2 - 10
: IP spoof 2 - 10
: self route 2 - 9
: TCP (no connection) 2 - 10

detecting use of Internet phone 2 - 25

DHCP client and server 2 - 39

DNS query or response is denied 2 - 9

DNS server too slow 2 - 9

dropping echo request 2 - 10

E

: embryonic limit exceeded 2 - 18
: end configuration--FAILED 2 - 16
: End Configuration Replication 2 - 41
: erase configuration 2 - 16

F

: failover active command 2 - 5
: failover command 2 - 6
: failover messages 2 - 4, 2 - 6, 2 - 7, 2 - 41
: filter activex command 2 - 37
: filter allow command 2 - 27
: filtering ActiveX objects 2 - 37
: floodguard command 2 - 14
: FTP data connection failed 2 - 19

G

: global command 2 - 9, 2 - 28

H

: H.245 2 - 25
: H.323 2 - 25
: hostile event 2 - 11, 2 - 35, 2 - 36

I

ICMP

: packet denied 2 - 10
: translation creation failed 2 - 28, 2 - 29

inbound TCP connection denied 2 - 8

insufficient memory 2 - 19, 2 - 37

interface, virtual 2 - 24

Internet phone, detecting use of 2 - 25

invalid character replaced in email address 2 - 13

invalid source addresses 2 - 10

L

: Leaving ALLOW mode, URL Server 2 - 27
: link status `Up' or 'Down' 2 - 7
: log message variables 1 - 6
: loopback network, invalid source address 2 - 10
: lost failover communications with mate 2 - 7

M

: memory, insufficient 2 - 19, 2 - 37
: message block alloc failed 2 - 7
: messages, how to read 1 - 6
: monitoring on interface 2 - 6
: MPPE 2 - 36
: MS-CHAP 2 - 36

N

: nat command 2 - 9, 2 - 28
: no ARP for host 2 - 16
: no associated connection within connection table 2 - 10
: no authentication server found 2 - 13
: nobody keyword in a message 1 - 3
: no failover active command 2 - 5
: no failover command 2 - 6
: no translation group found 2 - 28

O

: outbound deny command 2 - 8
: out of address translation slots! 2 - 19

P

PAT

: address 2 - 19, 2 - 37
: global address 2 - 10, 2 - 28
: host 2 - 10

permitted

: manager connection 2 - 30
: Telnet login session 2 - 29

PIX

: clear finished 2 - 17
: console enable password incorrect 2 - 30
: reload command executed 2 - 17

PIX Firewall Manager message 2 - 16

portmapped translation, reclaimed 2 - 28

portmapped translation built for global address 2 - 28

power failure, failover 2 - 4

PPP virtual interface 2 - 24

PPTP tunnel 2 - 24

PPTP XGRE packet 2 - 35

preallocate H323 UDP backconnection 2 - 25

R

: RADIUS authentication 2 - 36
: RCMD, back connection failed 2 - 19
: rebuilt TCP connection 2 - 26
: Reducing link MTU 2 - 18
: reload command 2 - 17
: rsh command 2 - 19

S

: security breach 2 - 9, 2 - 10
: self route 2 - 9
: severity levels definition 1 - 6
: show arp command 2 - 16
: show blocks command 2 - 7
: show outbound command 2 - 8
: show static command 2 - 18
: show telnet command 2 - 29
: SMTP 2 - 13
: snmp-server command 1 - 9
: SSH 2 - 32
: static command 2 - 9
: SYN 2 - 10
: sysopt connection enforcesubnet command 2 - 10

T

TCP connection 2 - 24

TCP translation creation failed 2 - 28, 2 - 29

teardown

: portmap translation 2 - 28
: TCP connection 2 - 25
: translation for IP address 2 - 28

Telnet 1 - 4, 1 - 9

Telnet login session failed 2 - 30

terminal monitor command 1 - 4

testing interface 2 - 7

timeout uauth command 2 - 15

too many connections on static 2 - 18

translation built for global address 2 - 28

tunnel, PPTP 2 - 24

U

: UDP packet 2 - 9
: UDP translation creation failed 2 - 28, 2 - 29
: URL filtering, disabled 2 - 27
: URL Server 2 - 27

V

: variables in log messages 1 - 6
: virtual interface 2 - 24
: vpdn group command 2 - 36

W

: Web requests, unfiltered 2 - 27
: WebSENSE server 2 - 27
: write command 2 - 16
: write erase command 2 - 16

X

: XGRE 2 - 35

Table of Contents

index