cc/td/doc/product/iaabu/pix/pix_v50
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

INDEX

INDEX

A


AAA message     2 - 8, 2 - 9

access denied URL     2 - 20

ActiveX object, filtering     2 - 8

address translation slots     2 - 14

ARP table     2 - 10

asymmetric routing loop     2 - 14

attacks
denial of service     2 - 15
fragment     2 - 15
land.c     2 - 7
SYN     2 - 13

Auth from IP address/port to IP address/port failed     2 - 8

Auth start for user     2 - 8

Authen Session End     2 - 10

authentication
failed     2 - 9
request succeeds     2 - 9

authorization
denied for user     2 - 9
denied from address     2 - 9

B


begin configuration     2 - 11

beginning configuration replication     2 - 25

broadcast, invalid source address     2 - 7

built H245 connection     2 - 19

built inbound TCP connection     2 - 18

C


can not specify PAT host     2 - 7

commands
conduit     2 - 6, 2 - 8, 2 - 10
conduit permit icmp     2 - 7
config     2 - 11
configure     2 - 11
failover     2 - 3
failover active     2 - 3
filter activex     2 - 8
filter allow     2 - 21
floodguard     2 - 9
global     2 - 6, 2 - 22
nameif     2 - 10
nat     2 - 6, 2 - 22
no failover     2 - 3
no failover active     2 - 3
outbound     2 - 10
outbound deny     2 - 5
reload     2 - 11, 2 - 12
rsh     2 - 13
show arp     2 - 10
show blocks     2 - 5
show link     2 - 15
show nameif     2 - 10
show nat     2 - 14, 2 - 15
show outbound     2 - 5, 2 - 6, 2 - 14, 2 - 15
show route     2 - 14
show static     2 - 13
show telnet     2 - 22
show timeout     2 - 14
snmp-server     1 - 8
static     2 - 6, 2 - 10
sysopt connection enforcesubnet     2 - 7
timeout uauth     2 - 10
write     2 - 11
write erase     2 - 11

conduit command     2 - 6, 2 - 8, 2 - 10

conduit permit icmp command     2 - 7

config command     2 - 11

configure command     2 - 11

connection denied     2 - 5

could not find xlate     2 - 14

D


denied manager connection     2 - 23

denied Telnet login session     2 - 22

deny
inbound from outside     2 - 6
inbound ICMP     2 - 7
inbound UDP     2 - 6
inbound UDP due to query/response     2 - 6
IP from address to address     2 - 7
IP spoof     2 - 7
self route     2 - 6
TCP (no connection)     2 - 7

detecting use of Internet phone     2 - 19

DNS query or response is denied     2 - 6

DNS server too slow     2 - 6

dropping echo request     2 - 7

E


embryonic limit exceeded     2 - 13

End Configuration Replication     2 - 26

end configuration--FAILED     2 - 11

erase configuration     2 - 11

ESP Error     2 - 15

F


failover active command     2 - 3

failover command     2 - 3

failover messages     2 - 1, 2 - 2, 2 - 3, 2 - 4, 2 - 25, 2 - 26

filter activex command     2 - 8

filter allow command     2 - 21

filtering ActiveX objects     2 - 8

floodguard command     2 - 9

FO replication failed     2 - 25

FO unreplicable     2 - 25

FTP data connection failed     2 - 13

G


global command     2 - 6, 2 - 22

H


H.245     2 - 19

H.323     2 - 19

host injecting IP fragments     2 - 15

I


ICMP
packet denied     2 - 7
translation creation failed     2 - 22

inbound TCP connection denied     2 - 5

insufficient memory     2 - 14

Internet phone, detecting use of     2 - 19

invalid character replaced in email address     2 - 8

invalid source addresses     2 - 7

IPFRAG     2 - 15

J


JAVA filtering     2 - 5

K


keys, activate new     2 - 15

L


Leaving ALLOW mode, URL Server     2 - 21

link status `Up' or 'Down'     2 - 4

log message variables     1 - 6

loopback network, invalid source address     2 - 7

lost failover communications with mate     2 - 4

M


memory, insufficient     2 - 14

message block alloc failed     2 - 5

messages, how to read     1 - 6

modifying ActiveX object     2 - 8

monitoring on interface     2 - 4

MTU     2 - 15

N


nameif command     2 - 10

nat command     2 - 6, 2 - 22

NAT group     2 - 14, 2 - 15

no ARP for host     2 - 10

no associated connection within connection table     2 - 7

no authentication server found     2 - 9

no failover active command     2 - 3

no failover command     2 - 3

no interface is configured     2 - 10

No Key SPI     2 - 15

no translation group found     2 - 22

nobody keyword in a message     1 - 3

O


out of address translation slots!     2 - 14

outbound command     2 - 10

outbound deny command     2 - 5

P


packet contains activex content     2 - 8

PAT
address     2 - 14
cannot allocate an adress for connection     2 - 14, 2 - 15
global address     2 - 7, 2 - 21
host     2 - 7
too many connections     2 - 14, 2 - 15

permitted
manager connection     2 - 23
Telnet login session     2 - 22

PIX
clear finished     2 - 12
console enable password incorrect     2 - 23
reload command executed     2 - 12

PIX Firewall Manager message     2 - 11

portmapped translation built for global address     2 - 21

portmapped translation, reclaimed     2 - 21

power failure, failover     2 - 2

preallocate H323 UDP backconnection     2 - 19

Private Link message     2 - 15

R


RCMD, back connection failed     2 - 13

rebuilt TCP connection     2 - 19

Reducing link MTU     2 - 12

reload command     2 - 11, 2 - 12

routing loop     2 - 14

rsh command     2 - 13

S


security breach     2 - 6, 2 - 7

self route     2 - 6

severity levels definition     1 - 6

show arp command     2 - 10

show blocks command     2 - 5

show link command     2 - 15

show nameif command     2 - 10

show nat command     2 - 14, 2 - 15

show outbound command     2 - 5, 2 - 6, 2 - 14, 2 - 15

show route command     2 - 14

show static command     2 - 13

show telnet command     2 - 22

show timeout command     2 - 14

SMTP     2 - 8

snmp-server command     1 - 8

static command     2 - 6, 2 - 10

SYN     2 - 7

sysopt connection enforcesubnet command     2 - 7

T


TCP connection     2 - 18

TCP translation creation failed     2 - 22

teardown
portmap translation     2 - 21
TCP connection     2 - 19
translation for IP address     2 - 21

Telnet     1 - 4, 1 - 8

Telnet login session failed     2 - 22

terminal monitor command     1 - 4

testing interface     2 - 4

timeout uauth command     2 - 10

too many connections on static     2 - 13

translation built for global address     2 - 21

translation for address denied     2 - 6

U


UDP packet     2 - 6

UDP translation creation failed     2 - 22

unable to allocate a record for each fragment     2 - 15

unable to allocate new UDP connections     2 - 13

unable to find translation     2 - 14

URL filtering, disabled     2 - 21

URL Server     2 - 20

V


variables in log messages     1 - 6

W


Web requests, unfiltered     2 - 21

WebSENSE server     2 - 20

write command     2 - 11

write erase command     2 - 11

hometocprevnextglossaryfeedbacksearchhelp
Posted: Thu Nov 4 20:56:36 PST 1999
Copyright 1989-1999©Cisco Systems Inc.