Index

index

A

Active Connections dialog box

: description 7-20
: field descriptions 7-22

adding pools 2-5

Add Pool Now button 2-5

Add Subscriber button 3-5

administrative state 3-7

aggregates 6-1

assigned ports 2-7

assigning CAP ATU-C ports 3-3

asynchronous transfer mode

: See ATM

ATM

: edge switch port 6-1
: network backbone 6-3

ATM virtual channels

: guidelines for configuring 4-1

ATU-C Ports

: tab fields 7-18

ATU-C ports

: in service 7-14
: locking 1-2

ATU-R modem 7-1

B

baud rates 3-8

blocked connections 7-14, 7-15

block time 7-13

boosted signal 7-10

buttons

: Add Pool Now 2-5
: Add Subscriber 3-5
: Delete Pool Now 2-5
: Edit Pool 3-5
: Edit Subscriber 3-5
: Service Provisioning 3-7

C

CAP ATU-C Module Properties dialog box 5-5

CAP ATU-C ports

: assigning to a logical pool 3-3

CAP rates 3-8

caution, definition xiii

changing noise margins 7-2

circuit ID 3-5, 3-7

Cisco 6100 Series system

: connection tests A-1
: system pool summary counters 7-13

configuration, testing A-1

connection counter 7-2

connections

: blocked 7-14, 7-15
: configuration tests A-1
: counters 7-11
: subscriber activity 7-19
: subtending 6-2
: subtending diagram 6-2
: successful 7-13, 7-15
: total requests 7-14

counters

: connection 7-2, 7-11
: system pool summary 7-13
: threshold 7-11
: training 7-11

CPE

: signature 3-8
: training 5-1
: training rate 7-7

customer premises equipment

: See CPE

D

data path tests 6-4

Delete Pool Now button 2-5

deleting

: pools 2-5
: subscriber PVCs 4-7
: subscribers 3-10

deleting subscriber PVCs 4-7

dialog boxes

: Active Connections 7-20
: CAP ATU-C Module Properties 5-5
: LIM Properties Port Configuration tab 3-5
: Module Properties Port Configuration tab 5-2
: Module Properties Usage State group box 7-19
: Performance Management dialog ATU-C ports tab 7-18
: Performance Management dialog box Subscriber tab 7-15
: Performance Management Line Ports tab 7-16
: Performance Management Pool Summary tab 7-13
: Pool Properties 2-4
: Service Provisioning 4-5
: Subscriber Properties 3-6, 4-5, 5-3, 7-5
: Subtend Host Service Provisioning 6-5

display service statistics 2-6

E

: edge switch port connection 6-1
: Edit Pool button 3-5
: Edit Subscriber button 3-5
: entities, unlocking 5-1

F

failed trains 7-14, 7-17

far-end equipment 6-4

fields

: Active Connections dialog box 7-22
: ATU-C Ports tab 7-18
: LIM properties 3-5
: Performance Management Line Ports tab 7-17
: pool properties 2-5
: pool summary 7-13
: Service Provisioning dialog box 4-3
: subscriber 7-15
: subscriber properties 3-7

G

group subscribers 2-1, 6-4

guide contents, description xi

guidelines

: for configuring ATM virtual channels 4-1
: for provisioning subscribers 1-2
: for setting up logical subscriber pools 2-3
: for subtending 6-3
: for unlocking entities 5-1

H

: hardware, supported 1-2

I

idle timer 3-8

IDs

: circuit 3-5, 3-7
: logical pools 3-5
: network VCI and VPI 4-3
: network VPI 4-3
: physical pool 3-5
: subscriber 4-3, 7-15
: subscribers 3-5, 3-7
: subscriber VCI and VPI 4-3
: subscriber VPI 4-3

in service

: ports 2-7, 7-14

L

latency, interleaved delay 4-4

LEDs, green blinking 5-3

LIM Module Properties dialog box

: Port Configuration tab 3-5

LIM ports 7-1

: assigning to a logical pool 3-3
: locking 1-2

LIM properties field descriptions 3-5

locked state 3-5, 3-7

locking

: ATU-C ports 1-2
: LIM ports 1-2

logical pools 3-3

: adding 2-5
: assigning LIM ports 3-3
: definition 2-1
: deleting 2-5
: ID 3-5
: steps for creating 2-7
: tabs on Physical Pools dialog box 2-4

logical subscriber pools, guidelines for setting up 2-3

M

management information base

: See MIB

margins, downstream and upstream 3-8

MIB 7-7

modem training sequence 7-2

Module Properties dialog box

: Port Configuration tab 5-2
: Usage State group box 7-19

modules, unlocking 5-4

multiband terminal algorithm 7-7

N

: near cross-talk 7-10
: network side 4-5
: network-side uniqueness violation 4-5
: node down 6-4
: note, definition xiii

O

OSRs 2-6

OSRs field 3-4

over subscription ratios

: See OSRs

P

parameter exchange 7-5

path latency, interleaved delay 4-2

payload transmission rates 7-2

Performance Management dialog box

: ATU-C Ports tab 7-18
: Line Ports tab 7-16
: Line Ports tab fields 7-17

Performance Managment dialog box

: Pool Summary tab 7-13
: Subscriber tab 7-15

permanent virtual channels

: See PVCs

physical pools

: diagram 2-2
: editing 3-5
: ID 3-5

Pool Properties dialog box

: field descriptions 2-5
: illustration and description 2-4

pool summary field descriptions 7-13

pool time 7-13

ports

: assigned 2-7
: associating subscribers 3-7
: in service 2-7, 7-14
: LIM 7-1
: unlocking 5-3

power spectral density

: See PSD

priority queue 4-3

provisioned pools 2-7

provisioning subscribers, guidelines 1-2

PSD, downstream and upstream values 3-8

PVCs

: deleting subscribers 4-7

Q

: queue priority 4-3

R

rates

: payload transmission 7-2
: training 3-7

ratios, OSRs 2-6

receive signal quality 7-8

S

Service Provisioning button 3-7

Service Provisioning dialog box

: field descriptions 4-3
: using to set VCI/VPI addresses 4-5

session in progress 7-8

session timer 3-8

states

: administrative 3-5, 3-7
: locked 3-5
: unlocked 2-7, 3-5

statistics

: line 7-17
: service 2-6
: subscribers 7-15

subscriberdefaults.ini

: example 3-2
: file 3-1

subscriber ID 3-5, 3-7, 4-3, 7-15

subscriber loop 7-1

Subscriber Properties dialog box 3-6, 4-5, 5-3, 7-5

subscriber properties fields 3-7

subscribers

: adding 3-5
: assigning VPI/VCI addresses 4-1
: associating to ports 3-7
: connection activity 7-19
: defining VPI and VCI addresses 4-4
: deleting PVCs 4-7
: editing 3-5
: group 6-4
: guidelines for provisioning 1-2
: line statistics 7-17
: over subscribing 2-6
: setting defaults 3-1
: statistics 7-15
: steps for adding 3-8
: steps for deleting 3-10
: steps for modifying 3-8
: unlocking 5-2
: verifying settings 5-5
: VPI/VCI 4-3

subscriber side 4-5

subtended, definition 6-1

Subtend Host Service Provisioning dialog box 6-5

subtending

: connections 6-2
: connections, diagram 6-2
: considerations 6-1
: definition 6-1
: guidelines 6-3
: host 6-3

successful connections 7-13, 7-15

successful trains 7-14, 7-17

symbol rates 7-2

T

technicians xi

telco xi

threshold counters 7-11

timesaver, definition xiii

timing

: idle 3-8
: session 3-8

tip, definition xiii

total trains initiated 7-14

train counters 7-11

training 7-14

: CPEs 7-7
: description of process 7-5
: failed trains 7-14, 7-17
: max allowed downstream and upstream rates 3-7
: modem sequence 7-2
: successful 7-17
: total initiated 7-14

transit subscribers, on Service Provisioning dialog box 6-5

U

unlocked 2-7

: state 3-5
: state, description 3-7

unlocking

: entities 5-1
: modules 5-4
: ports 5-3
: subscribers 5-2

V

valid address ranges 6-2

verifying subscriber settings 5-5

virtual channel identifer

: See VCI

virtual path identifier

: See VPI

VPI and VCI addresses

: defining 4-4
: steps for adding 4-5
: steps for modifying 4-8

VPIs 4-5

W

: warning, definition xiii

Table of Contents

index