Index

index

A

Active Connections dialog box 6-18

ADD/EDIT SUBSCRIBER 2-10

adding subscribers 2-5

ADSL

: connection process 6-3

alphanumeric characters 2-8

anomalies A-3

ATM

: network backbone 5-3

ATM edge switch port 5-1

ATM Virtual Circuit Configuration Support 4-1

ATU-R 6-7

B

: Bit Error Rate and Noise Margin 6-1

C

CAP ATU-C module

: subscriber provisioning 3-3

CAP RADSL transceivers 6-4

carrierless amplitude and phase modulation (CAP) 1-1

caution

: definition xiii

Changing Noise Margins 6-4

circuit ID suffix 2-2

coding A-3

complement signed integer A-5

CPE

: signature feature 2-11
: training rate 6-9

D

data path tests 5-4

deleting

: subscriber PVCs 3-5
: subscribers 2-13

Direct Connect configuration

: without PSC 1-3
: with PSC 1-2

disabled synchronization control mechanism 2-16

DMT-2

: transceiver training rates 6-4

DMT-2 ATU-C module

: performance displays 2-18

DMT-2 Status dialog box 2-18

E

: edge switch port connection 5-1
: Edit Subscriber field 2-5

F

failed trains 6-13

far attenuation parameter A-3

FarCvfLfe parameter A-4

FarCviLfe parameter A-4

FarEcsLfe parameter A-4

far-end

: equipment 5-4

FarSNRMargin A-5

FarSNRMargin parameter A-3

fast data stream A-4

firmware version 2-5

fixed upstream margin 2-3

G

: green blinking LED 4-6
: group subscribers 5-4
: guide contents, description xi

H

: HecCellF parameter A-3
: HecCellI A-3
: HecViolI A-3
: hyperlinks 2-4

L

: line and location detail 2-2
: local loop 2-8
: locking a Confirmation dialog box 2-14

M

management information base 6-9

margin error values 2-3

: subtending 5-3

module

: AID and port number 2-8
: Properties dialog box 2-5
: Properties dialog box fields and buttons 2-5

multiband terminal algorithm 6-9

N

: NearAttenuation A-5
: Near Attenuation parameter A-3
: NearCviL A-4
: NearEcfL parameter A-4
: NearEcsL parameter A-4
: NearEsL parameter A-3
: NearSesL parameter A-3
: NearSNRMargin parameter A-3
: NearUasL parameter A-3
: node down 5-4
: nonservice-affecting parameter 2-2
: note, definition xiii
: null subscriber IDs 2-8

P

parameter A-3

Parameter column 2-18

parameter exchange 6-7

Payload Transmission Rates 6-4

performance management

: dialog box 6-12

performance monitoring 2-18

plain old telephone service (POTS) 1-1

Port Properties Menu

: Configuration 4-4

Priority Queue 2-3

Provisioning/PVC Summary Dialog Box Enhancements 3-7

PSD Transmit Power 2-9

PVC information 4-7

R

: Reference Source Not Found 2-18
: Rx SNR 6-19

S

SDSL Connection Process 6-2

SDSL Upstream/Downstream Bit Rates and Payload Combinations 6-2

Service Provisioning with a Direct Connect Configuration 1-1, 2-1, 3-1, 4-1, 5-1

set and get messages 1-1

simple network management protocol 1-1

StandardTrain 6-4

state information 6-17

STU-C modules 2-3

subscriber and network sides 3-4

Subscriber ID 2-2

subscriber PVCs, deleting 3-5

subscribers

: deleting 2-13
: groups 5-4

Subscriber VPI/VCI 3-2

Subtending 5-1

subtending

: host 5-3
: MC 5-3

Subtending Connections 5-2

Successful Trains 6-12

T

: The far-end SNR margin A-3
: timesaver, definition xiii
: tip, definition xiii
: train for service 4-6
: Training Procedure 6-7
: Training rates for the CAP ATU-C module 2-3
: transit subscribers 5-4
: Transmission Unit 1-1
: transport capacity 6-2

U

: Understanding Performance Train Counters 6-11
: uniqueness 2-8
: Unlocking a Port 4-7
: Unlocking a Subscriber 4-4
: Unlocking Entities 4-3
: UserCellI A-4

V

: valid address ranges 5-3
: Value column 2-18
: VPIs 3-4

W

warning

: definition xiii

Table of Contents

index