Table of Contents

Cabling Guidelines
Direct Connect with a POTS Splitter Configuration Cables

Cisco 6130 to Cisco 6120 Cables
Cisco 6130 to Third-Party POTS Splitter Cables
POTS Splitter to MDF Cables

One-to-One Cables
Two-to-Two Cables

Direct Connect Without a POTS Splitter Configuration Cables
Intermixing Cables

CAB-64-Mix Cable Set
CAB-128-Mix Cable Set

Port Mapping Tables

Direct Connect with a POTS Splitter Configuration Port Mapping Tables
Direct Connect Without a POTS Splitter Configuration Port Mapping Tables
Port Mapping Table for Building Cisco 6130 Cables

Standard Telco Color Chart

Cable and Port Mapping Specifications

This appendix provides cabling guidelines, cabling configuration diagrams, part numbers, and port mapping tables for the following configurations:

• Direct Connect with a POTS splitter configuration

• Direct Connect without a POTS splitter configuration

Cisco used a standard telco color chart when designing the cables for the Cisco 6130 with NI-2 system connections. This appendix includes a standard telco color chart.

Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Note   For port mapping tables to build your own Cisco 6130 cables, see Table B-13.

Table B-1 shows an overview of the cables used for each Cisco 6130 with NI-2 system configuration.

Table B-1: Cisco 6130 with NI-2 System Configuration and Cable Overview

Configuration	Connection	Cable Type	Ports		Line Coding Technology	Reference
			Cisco 6130	POTS Splitter		Table	Figure
Direct Connect with a POTS splitter	Cisco 6130 to two Cisco 6120 chassis	One-to-two	128	64 each POTS splitter	CAP (ADSL) or DMT-2 (ADSL)	Table B-2	Figure B-2 and Figure B-3
	Third-party POTS splitter to Cisco 6130	One-to-one	128	128	DMT-2 (ADSL)	Table B-3	Figure B-4
	POTS splitter to MDF1	One-to-one	--	80	CAP (ADSL) or DMT-2 (ADSL)	Table B-4	Figure B-5, Figure B-6, and Figure B-7
		Two-to-two	--	80	CAP (ADSL) or DMT-2 (ADSL)	Table B-5	Figure B-8, Figure B-9, and Figure B-10
Direct Connect without a POTS splitter	Cisco 6130 to MDF	Three-to-three	128	--	DMT-2 (ADSL) 2B1Q (SDSL2)	Table B-6	Figure B-11 and Figure B-12
Intermixing	Cisco 6130 to Cisco 6120 Cisco 6130 to MDF	One-to-one	96	64	DMT-2 (ADSL) 2B1Q (SDSL)	Table B-7	Figure B-13
	Cisco 6130 to third-party POTS splitter Cisco 6130 to MDF	One-to-one	96	128	CAP (ADSL) or DMT-2 (ADSL) 2B1Q (SDSL)	Table B-8	--

1MDF = main distribution frame 2SDSL = symmetrical digital subscriber line

Cabling Guidelines

You need to ensure that all cables are screwed in to the backplane and that the Champ connectors are tie wrapped. (See Figure B-1.)

Direct Connect with a POTS Splitter Configuration Cables

In a Direct Connect with a POTS splitter configuration, use only designated cables to connect the Cisco 6130, the POTS splitter, and the MDF. This section provides tables and illustrations for the following cables:

• Cisco 6130 to Cisco 6120 Cables

• Cisco 6130 to Third-Party POTS Splitter Cables

• POTS Splitter to MDF Cables

Note   Some chassis connectors in the cabling diagrams are not used because they are specific to one of the other configurations of the Cisco 6130 with NI-2 system or because they are reserved for future use.

Cisco 6130 to Cisco 6120 Cables

You can use one-to-two cables to connect one Cisco 6130 to two Cisco 6120 chassis for systems using quad-port xTU-C line cards.

Table B-2 lists the backplane connectors and the part numbers for the one-to-two cables. In this configuration, 64 POTS splitter ports are used in each Cisco 6120, for a total of 128 ports.

Table B-2: Connectors and Part Numbers for One-to-Two Cables--Cisco 6130 to Two Cisco 6120
Chassis Connection

Backplane Connector					Cisco Part Number
Cisco 6130	First Cisco 6120 Connector		Second Cisco 6120 Connector		Kit	Subassembly
	Backplane	Cable	Backplane	Cable
J39	J3	P3A	J3	P3B	CAB-MC128-PSC80	72-1767-011
J40	J1	P1A	J1	P1B	CAB-MC128-PSC80	72-1767-01
J41	J5	P5A	J5	P5B	CAB-MC128-PSC80	72-1767-01
J42	J4	P4A	J4	P4B	CAB-MC128-PSC80	72-1768-012
J43	J2	P2A	J2	P2B	CAB-MC128-PSC80	72-1769-013
J44	J6	P6A	J6	P6B	CAB-MC128-PSC80	72-1770-014

1This cable can be used for Cisco 6130 connectors J39, J40, and J41. 2This cable is specifically for Cisco 6130 connector J42. 3This cable is specifically for Cisco 6130 connector J43. 4This cable is specifically for Cisco 6130 connector J44.

---

Note   When you use the one-to-two cable, see Table B-9 for port mapping information.

---

Figure B-2 shows the one-to-two cable.

---

Tips If you use 64 POTS splitter ports, tie wrap the second Cisco 6120 connector to the rack. When you expand your system to 128 POTS splitter ports, the second Cisco 6120 connector will attach to a second Cisco 6120.

---

Figure B-3 shows the cabling between one Cisco 6130 and two Cisco 6120 chassis in which the cables listed in Table B-2 are used.

Cisco 6130 to Third-Party POTS Splitter Cables

The third-party POTS splitter is compatible with the Cisco 6130. If you use the third-party POTS splitter, you need six one-to-one cables to connect the POTS splitter to the Cisco 6130 connectors J39 through J44. This one-to-one cable is not the same as the one-to-one cables used in previous configurations.

Use the one-to-one cable when you are connecting the Cisco 6130 to the third-party POTS splitter. Table B-3 lists the cable and associated part numbers.

Table B-3: Connectors and Part Numbers for One-to-One Cables for the Third-Party POTS Splitter

Backplane Connector		Cisco Part Number
Cisco 6130	Third-Party POTS Splitter	Kit	Subassembly
J39	xDSL 9-32	CAB-6121-1	72-1766-01
J40	xDSL 1-8 65-72	CAB-6121-1	72-1766-01
J41	xDSL 73-96	CAB-6121-1	72-1766-01
J42	xDSL 33-56	CAB-6121-1	72-1766-01
J43	xDSL 57-64 121-128	CAB-6121-1	72-1766-01
J44	xDSL 97-120	CAB-6121-1	72-1766-01

---

Note   When you use the one-to-one cable, see Table B-10 for port mapping information.

---

Figure B-4 shows the one-to-one special cable.

---

Note   If you are installing a Direct Connect with a POTS splitter configuration using the third-party POTS splitter, install the Cisco components (excluding the POTS splitter) according to "Installing a Direct Connect Without a POTS Splitter Configuration." Refer to the appropriate vendor documentation for installation procedures for the third-party POTS splitter.

---

POTS Splitter to MDF Cables

You can use the following cables to connect the POTS splitter (Cisco 6120 or third-party POTS splitter) to the MDF in a Direct Connect with a POTS splitter configuration:

• One-to-one cables--Used to connect the POTS splitter (Cisco 6120 or third-party POTS splitter) to the MDF.

Note   Refer to the appropriate vendor documentation for cabling connectors and procedures for the third-party POTS splitter.

• Two-to-two cables--Used to clearly associate the mapping between the wire pairs and the Cisco 6130 or Cisco 6120 ports. These cables attach to the Cisco 6120 MDF connections (J11 to J14) and the Cisco 6120 POTS connections (J7 to J10).

One-to-One Cables

You can use one-to-one cables to connect the Cisco 6120 to the MDF or POTS service connectors. Table B-4 lists the backplane connectors, the available cable lengths, and the part numbers for the one-to-one cables. Each cable has the same pinouts. The only difference between the four cables is the length. Use the length that works best for your configuration.

Table B-4: Connectors, Lengths, and Part Numbers for One-to-One Cables--Cisco 6120 to MDF or POTS Connections

Backplane Connector		Cisco Part Number
Cisco 6120	MDF Modem	Kit	Subassembly
MDF Connectors
J11, J12, J13, J14	P1 (modems 1 to 16), P3 (modems 33 to 48), P2 (modems 17 to 32), or P4 (modems 49 to 64)	CAB-61-015 50-ft cable	72-1599-01
		CAB-61-016 150-ft cable	72-1598-01
		CAB-61-017 75-ft cable	72-1597-01
		CAB-61-018 175-ft cable	72-1596-01
POTS Connectors
J7, J8, J9, J10	P1 (modems 1 to 16), P3 (modems 33 to 48), P2 (modems 17 to 32), or P4 (modems 49 to 64)	CAB-61-015 50-ft cable	72-1599-01
		CAB-61-016 150-ft cable	72-1598-01
		CAB-61-017 75-ft cable	72-1597-01
		CAB-61-018 175-ft cable	72-1596-01

Figure B-5 shows the one-to-one cable.

Figure B-6 shows the cabling between the Cisco 6120 to the MDF in which the cables listed in Table B-4 are used.

Figure B-7 shows the cabling between the Cisco 6120 to the POTS service connections in which the cables listed in Table B-4 are used.

---

Note   Refer to the appropriate vendor documentation for cabling connectors and procedures for the third-party POTS splitter.

---

Two-to-Two Cables

To associate the Cisco 6120 MDF or POTS wire pairs and the Cisco 6130 modem ports, the two-to-two cable remaps the wire pairs from the Cisco 6120 MDF or POTS connectors to the Cisco 6120 connectors. You can use the two-to-two cable to

Table B-5 lists the backplane connectors and the part numbers for the two-to-two cables connecting the Cisco 6120 to the MDF in a Direct Connect with a POTS splitter configuration.

Table B-5: Connectors and Part Numbers for Two-to-Two Cables--Cisco 6120 to
MDF Connections

Backplane Connector		Cisco Part Number
Cisco 6120	MDF Modem	Kit	Subassembly
xDSL Subscriber Line Connectors
J11, J12	P1 (modems 1 to 16) or P3 (modems 33 to 48)	CAB-PSC-80-REPIN	72-1716-01 (right cable)
J13, J14	P2 (modems 17 to 32) or P4 (modems 49 to 64)	CAB-PSC-80-REPIN	72-1772-01 (left cable)
Voice Line Connectors
J7, J9	P1 (modems 1 to 16) or P3 (modems 33 to 48)	CAB-PSC-80-REPIN	72-1716-01 (right cable)
J8, J10	P2 (modems 17 to 32) or P4 (modems 49 to 64)	CAB-PSC-80-REPIN	72-1772-01 (left cable)

---

Note   When you use the two-to-two cable, see Table B-11 for port mapping information.

---

Figure B-8 shows the two-to-two cable.

Figure B-9 shows the cabling between the xDSL subscriber line connectors on the Cisco 6120 and the MDF in which the cables listed in Table B-5 are used.

Figure B-10 shows the cabling between the voice lines on the Cisco 6120 and the voice-switching equipment that provides local POTS service. The cables listed in Table B-5 are used for the connection.

Direct Connect Without a POTS Splitter Configuration Cables

In a Direct Connect without a POTS splitter configuration, use only designated cables to connect the Cisco 6130 and the MDF.

Note   Some chassis connectors in the cabling diagrams are not used because they are specific to one of the other configurations of the Cisco 6130 with NI-2 system or because they are reserved for future use.

To associate the MDF wire pairs and the Cisco 6130 modem ports, the three-to-three cable remaps the wire pairs from the Cisco 6130 connectors to the MDF connectors. Use the cable in systems with quad-port xTU-C modules installed in the chassis. Table B-6 lists the backplane connectors and the part numbers for the three-to-three cables connecting the Cisco 6130 to the MDF in a Direct Connect without a POTS splitter configuration.

---

Note   When you use the three-to-three cable, see Table B-12 for port mapping information.

---

Figure B-11 shows the three-to-three cable.

Figure B-12 shows the cabling between the Cisco 6130 and the MDF in which the cables listed in Table B-6 are used.

Intermixing Cables

Use intermixing cables when you want to configure half of the Cisco 6130 chassis with ADSL (Direct Connect with a POTS splitter configuration) and the other half of the chassis with SDSL (Direct Connect without a POTS splitter configuration). This section provides tables and illustrations for the following cables:

• CAB-64-mix--Use with the Cisco 6120

• CAB-128-mix--Use with the third-party POTS splitter

CAB-64-Mix Cable Set

Use CAB-64-mix cable set when you install dual-port DMT-2 ATU-C modules in slots 1 through 8 and slots 21 through 28 and STU-C modules in slots 13 through 20 and slots 31 through 38. Table B-7 lists the backplane connectors and the part numbers for the CAB-64-mix cable set.

Figure B-13 shows the cabling between the Cisco 6130, the Cisco 6120, and the MDF in which the cables listed in Table B-7 are used.

CAB-128-Mix Cable Set

Use CAB-128-mix cable set when you install quad-port flexi ATU-C modules in slots 1 through 8 and slots 21 through 28 and STU-C modules in slots 13 through 20 and slots 31 through 38. Table B-8 lists the backplane connectors and the part numbers for the CAB-128-mix cable set.

---

Note   See the left side of Figure B-12 for the Cisco 6130 cable connections for the J42, J43, and J44 connectors. Refer to the appropriate vendor documentation for cabling connectors and procedures for the third-party POTS splitter.

---

Port Mapping Tables

This section provides port mapping tables which show the wire pair and chassis port assignments for the following configurations and cables:

• Direct Connect with a POTS splitter configuration

• Direct Connect without a POTS splitter configuration

• Building your own Cisco 6130 cables

Direct Connect with a POTS Splitter Configuration Port Mapping Tables

Table B-9 maps the Cisco 6130 ports, the Cisco 6120 ports for two Cisco 6120 chassis, and the wire pairs when using the one-to-two cables (see Table B-2) for a Direct Connect with a POTS splitter configuration. The corresponding cable kit number is CAB-MC128-PSC80. You can use the one-to-two cables to connect one Cisco 6130 to two Cisco 6120 chassis for systems using quad-port ATU-C modules.

Table B-9: Port Mapping for One-to-Two Cables in a Direct Connect with a POTS Splitter Configuration

Cisco 6130 Slot/Line	Cisco 6120 Slot/Line		Champ Pins		Cisco 6120 MDF/ POTS Connection
	Cisco 6120 Chassis 1	Cisco 6120 Chassis 2	Tip	Ring
1/1	1/1	--	9	34	J11/J7
1/2	1/2	--	10	35
1/3	--	1/1	9	34
1/4	--	1/2	10	35
2/1	1/3	--	11	36
2/2	1/4	--	12	37
2/3	--	1/3	11	36
2/4	--	1/4	12	37
3/1	2/1	--	5	30
3/2	2/2	--	6	31
3/3	--	2/1	5	30
3/4	--	2/2	6	31
4/1	2/3	--	7	32
4/2	2/4	--	8	33
4/3	--	2/3	7	32
4/4	--	2/4	8	33
5/1	3/1	--	1	26
5/2	3/2	--	2	27
5/3	--	3/1	1	26
5/4	--	3/2	2	27
6/1	3/3	--	3	28
6/2	3/4	--	4	29
6/3	--	3/3	3	28
6/4	--	3/4	4	29
7/1	4/1	--	18	43
7/2	4/2	--	19	44
7/3	--	4/1	18	43
7/4	--	4/2	19	44
8/1	4/3	--	20	45
8/2	4/4	--	21	46
8/3	--	4/3	20	45
8/4	--	4/4	21	46
13/1	19/1	--	18	43	J14/J8
13/2	19/2	--	19	44
13/3	--	19/1	18	43
13/4	--	19/2	19	44
14/1	19/3	--	20	45
14/2	19/4	--	21	46
14/3	--	19/3	20	45
14/4	--	19/4	21	46
15/1	20/1	--	1	26
15/2	20/2	--	2	27
15/3	--	20/1	1	26
15/4	--	20/2	2	27
16/1	20/3	--	3	28
16/2	20/4	--	4	29
16/3	--	20/3	3	28
16/4	--	20/4	4	29
17/1	21/1	--	5	30
17/2	21/2	--	6	31
17/3	--	21/1	5	30
17/4	--	21/2	6	31
18/1	21/3	--	7	32
18/2	21/4	--	8	33
18/3	--	21/3	7	32
18/4	--	21/4	8	33
19/1	22/1	--	9	34
19/2	22/2	--	10	35
19/3	--	22/1	9	34
19/4	--	22/2	10	35
20/1	22/3	--	11	36
20/2	22/4	--	12	37
20/3	--	22/3	11	36
20/4	--	22/4	12	37
21/1	5/1	--	22	47	J11/J7
21/2	5/2	--	23	48
21/3	--	5/1	22	47
21/4	--	5/2	23	48
22/1	5/3	--	24	49
22/2	5/4	--	25	50
22/3	--	5/3	24	49
22/4	--	5/4	25	50
23/1	6/1	--	6	31	J12/J9
23/2	6/2	--	7	32
23/3	--	6/1	6	31
23/4	--	6/2	7	32
24/1	6/3	--	8	33
24/2	6/4	--	9	34
24/3	--	6/3	8	33
24/4	--	6/4	9	34
25/1	7/1	--	2	27
25/2	7/2	--	3	28
25/3	--	7/1	2	27
25/4	--	7/2	3	28
26/1	7/3	--	4	29
26/2	7/4	--	5	30
26/3	--	7/3	4	29
26/4	--	7/4	5	30
27/1	8/1	--	1	26
27/2	8/2	--	10	35
27/3	--	8/1	1	26
27/4	--	8/2	10	35
28/1	8/3	--	11	36
28/2	8/4	--	12	37
28/3	--	8/3	11	36
28/4	--	8/4	12	37
31/1	15/1	--	1	26	J13/J10
31/2	15/2	--	10	35
31/3	--	15/1	1	26
31/4	--	15/2	10	35
32/1	15/3	--	11	36
32/2	15/4	--	12	37
32/3	--	15/3	11	36
32/4	--	15/4	12	37
33/1	16/1	--	2	27
33/2	16/2	--	3	28
33/3	--	16/1	2	27
33/4	--	16/2	3	28
34/1	16/3	--	4	29
34/2	16/4	--	5	30
34/3	--	16/3	4	29
34/4	--	16/4	5	30
35/1	17/1	--	6	31
35/2	17/2	--	7	32
35/3	--	17/1	6	31
35/4	--	17/2	7	32
36/1	17/3	--	8	33
36/2	17/4	--	9	34
36/3	--	17/3	8	33
36/4	--	17/4	9	34
37/1	18/1	--	22	47	J14/J8
37/2	18/2	--	23	48
37/3	--	18/1	22	47
37/4	--	18/2	23	48
38/1	18/3	--	24	49
38/2	18/4	--	25	50
38/3	--	18/3	24	49
38/4	--	18/4	25	50

Table B-10 maps the Cisco 6130 ports, the POTS splitter ports, and the wire pairs when using the one-to-one cables (see Table B-3) when a third-party POTS splitter is installed in your configuration. The corresponding cable kit number is CAB-6121-1.

Table B-10: Port Mapping for One-to-One Cables with a Third-Party POTS Splitter

Cisco 6130 Slot/Line	POTS Splitter Slot/Line	Champ Pins		POTS Splitter Connection
		Tip	Ring
1/1	1/1	26	1	Line 1 to 24 or POTS 1 to 24
1/2	1/2	27	2
1/3	1/3	28	3
1/4	1/4	29	4
2/1	1/5	30	5
2/2	1/6	31	6
2/3	1/7	32	7
2/4	1/8	33	8
3/1	2/1	34	9
3/2	2/2	35	10
3/3	2/3	36	11
3/4	2/4	37	12
4/1	2/5	38	13
4/2	2/6	39	14
4/3	2/7	40	15
4/4	2/8	41	16
5/1	3/1	42	17
5/2	3/2	43	18
5/3	3/3	44	19
5/4	3/4	45	20
6/1	3/5	46	21
6/2	3/6	47	22
6/3	3/7	48	23
6/4	3/8	49	24
7/1	4/1	26	1	Line 25 to 48 or POTS 25 to 48
7/2	4/2	27	2
7/3	4/3	28	3
7/4	4/4	29	4
8/1	4/5	30	5
8/2	4/6	31	6
8/3	4/7	32	7
8/4	4/8	33	8
13/1	5/1	34	9
13/2	5/2	35	10
13/3	5/3	36	11
13/4	5/4	37	12
14/1	5/5	38	13
14/2	5/6	39	14
14/3	5/7	40	15
14/4	5/8	41	16
15/1	6/1	42	17
15/2	6/2	43	18
15/3	6/3	44	19
15/4	6/4	45	20
16/1	6/5	46	21
16/2	6/6	47	22
16/3	6/7	48	23
16/4	6/8	49	24
17/1	7/1	26	1	Line 49 to 72 or POTS 49 to 72
17/2	7/2	27	2
17/3	7/3	28	3
17/4	7/4	29	4
18/1	7/5	30	5
18/2	7/6	31	6
18/3	7/7	32	7
18/4	7/8	33	8
19/1	8/1	34	9
19/2	8/2	35	10
19/3	8/3	36	11
19/4	8/4	37	12
20/1	8/5	38	13
20/2	8/6	39	14
20/3	8/7	40	15
20/4	8/8	41	16
21/1	9/1	42	17
21/2	9/2	43	18
21/3	9/3	44	19
21/4	9/4	45	20
22/1	9/5	46	21
22/2	9/6	47	22
22/3	9/7	48	23
22/4	9/8	49	24
23/1	10/1	26	1	Line 73 to 96 or POTS 73 to 96
23/2	10/2	27	2
23/3	10/3	28	3
23/4	10/4	29	4
24/1	10/5	30	5
24/2	10/6	31	6
24/3	10/7	32	7
24/4	10/8	33	8
25/1	11/1	34	9
25/2	11/2	35	10
25/3	11/3	36	11
25/4	11/4	37	12
26/1	11/5	38	13
26/2	11/6	39	14
26/3	11/7	40	15
26/4	11/8	41	16
27/1	12/1	42	17
27/2	12/2	43	18
27/3	12/3	44	19
27/4	12/4	45	20
28/1	12/5	46	21
28/2	12/6	47	22
28/3	12/7	48	23
28/4	12/8	49	24
31/1	13/1	26	1	Line 97 to 120 or POTS 97 to 120
31/2	13/2	27	2
31/3	13/3	28	3
31/4	13/4	29	4
32/1	13/5	30	5
32/2	13/6	31	6
32/3	13/7	32	7
32/4	13/8	33	8
33/1	14/1	34	9
33/2	14/2	35	10
33/3	14/3	36	11
33/4	14/4	37	12
34/1	14/5	38	13
34/2	14/6	39	14
34/3	14/7	40	15
34/4	14/8	41	16
35/1	15/1	42	17
35/2	15/2	43	18
35/3	15/3	44	19
35/4	15/4	45	20
36/1	15/5	46	21
36/2	15/6	47	22
36/3	15/7	48	23
36/4	15/8	49	24
37/1	16/1	26	1	Line 121 to 128 or POTS 121 to 128
37/2	16/2	27	2
37/3	16/3	28	3
37/4	16/4	29	4
38/1	16/5	30	5
38/2	16/6	31	6
38/3	16/7	32	7
38/4	16/8	33	8

Table B-11 maps the Cisco 6130 ports, the Cisco 6120 ports, and the wire pairs when using the two-to-two cables (see Table B-5) for a Direct Connect with a POTS splitter configuration. The corresponding cable kit number is CAB-PSC-80-REPIN.

You can use the two-to-two cables to clearly associate the mapping between the wire pairs and the Cisco 6130 and Cisco 6120 ports. These cables attach to the Cisco 6120 MDF connections (J11 to J14) and the Cisco 6120 POTS connections (J7 to J10) for systems using dual-port xTU-C modules.

Table B-11: Port Mapping for Two-to-Two Cables in a Direct Connect with a POTS Splitter Configuration

Cisco 6130 Slot/Line	Cisco 6120 Slot/Line	Champ Pins		Cable Connector
		Tip	Ring
1/1	1/1	1	26	P1
1/2	1/2	2	27
2/1	1/3	3	28
2/2	1/4	4	29
3/1	2/1	5	30
3/2	2/2	6	31
4/1	2/3	7	32
4/2	2/4	8	33
5/1	3/1	9	34
5/2	3/2	10	35
6/1	3/3	11	36
6/2	3/4	12	37
7/1	4/1	13	38
7/2	4/2	14	39
8/1	4/3	15	40
8/2	4/4	16	41
13/1	19/1	1	26	P2
13/2	19/2	2	27
14/1	19/3	3	28
14/2	19/4	4	29
15/1	20/1	5	30
15/2	20/2	6	31
16/1	20/3	7	32
16/2	20/4	8	33
17/1	21/1	9	34
17/2	21/2	10	35
18/1	21/3	11	36
18/2	21/4	12	37
19/1	22/1	13	38
19/2	22/2	14	39
20/1	22/3	15	40
20/2	22/4	16	41
21/1	5/1	1	26	P3
21/2	5/2	2	27
22/1	5/3	3	28
22/2	5/4	4	29
23/1	6/1	5	30
23/2	6/2	6	31
24/1	6/3	7	32
24/2	6/4	8	33
25/1	7/1	9	34
25/2	7/2	10	35
26/1	7/3	11	36
26/2	7/4	12	37
27/1	8/1	13	38
27/2	8/2	14	39
28/1	8/3	15	40
28/2	8/4	16	41
31/1	15/1	1	26	P4
31/2	15/2	2	27
32/1	15/3	3	28
32/2	15/4	4	29
33/1	16/1	5	30
33/2	16/2	6	31
34/1	16/3	7	32
34/2	16/4	8	33
35/1	17/1	9	34
35/2	17/2	10	35
36/1	17/3	11	36
36/2	17/4	12	37
37/1	18/1	13	38
37/2	18/2	14	39
38/1	18/3	15	40
38/2	18/4	16	41

Direct Connect Without a POTS Splitter Configuration Port Mapping Tables

Table B-12 maps the Cisco 6130 ports and the wire pairs when using the three-to-three cables (see Table B-6) for a Direct Connect without a POTS splitter configuration. The corresponding cable kit number is CAB-MC128-MDF. You can use the three-to-three cables to connect the Cisco 6130 to the MDF for systems using dual-port DMT-2 ATU-C or quad-port xTU-C modules.

Table B-12: Port Mapping for Three-to-Three Cables in a Direct Connect Without a POTS Splitter Configuration

Cisco 6130 Slot/Line	Champ Pins		Cable Connector/ Cable Part Number
	Tip	Ring
1/1	1	26	Connector P4/ Cable 72-1765-01
1/2	2	27
1/3	3	28
1/4	4	29
2/1	5	30
2/2	6	31
2/3	7	32
2/4	8	33
3/1	9	34
3/2	10	35
3/3	11	36
3/4	12	37
4/1	13	38
4/2	14	39
4/3	15	40
4/4	16	41
5/1	17	42
5/2	18	43
5/3	19	44
5/4	20	45
6/1	21	46
6/2	22	47
6/3	23	48
6/4	24	49
7/1	1	26	Connector P5/ Cable 72-1765-01
7/2	2	27
7/3	3	28
7/4	4	29
8/1	5	30
8/2	6	31
8/3	7	32
8/4	8	33
13/1	1	26	Connector P1/ Cable 72-1720-01
13/2	2	27
13/3	3	28
13/4	4	29
14/1	5	30
14/2	6	31
14/3	7	32
14/4	8	33
15/1	9	34
15/2	10	35
15/3	11	36
15/4	12	37
16/1	13	38
16/2	14	39
16/3	15	40
16/4	16	41
17/1	17	42
17/2	18	43
17/3	19	44
17/4	20	45
18/1	21	46
18/2	22	47
18/3	23	48
18/4	24	49
19/1	1	26	Connector P2/ Cable 72-1720-01
19/2	2	27
19/3	3	28
19/4	4	29
20/1	5	30
20/2	6	31
20/3	7	32
20/4	8	33
21/1	9	34	Connector P5/ Cable 72-1765-01
21/2	10	35
21/3	11	36
21/4	12	37
22/1	13	38
22/2	14	39
22/3	15	40
22/4	16	41
23/1	17	42
23/2	18	43
23/3	19	44
23/4	20	45
24/1	21	46
24/2	22	47
24/3	23	48
24/4	24	49
25/1	1	26	Connector P6/ Cable 72-1765-01
25/2	2	27
25/3	3	28
25/4	4	29
26/1	5	30
26/2	6	31
26/3	7	32
26/4	8	33
27/1	9	34
27/2	10	35
27/3	11	36
27/4	12	37
28/1	13	38
28/2	14	39
28/3	15	40
28/4	16	41
31/1	9	34	Connector P2/ Cable 72-1720-01
31/2	10	35
31/3	11	36
31/4	12	37
32/1	13	38
32/2	14	39
32/3	15	40
32/4	16	41
33/1	17	42
33/2	18	43
33/3	19	44
33/4	20	45
34/1	21	46
34/2	22	47
34/3	23	48
34/4	24	49
35/1	1	26	Connector P3/ Cable 72-1720-01
35/2	2	27
35/3	3	28
35/4	4	29
36/1	5	30
36/2	6	31
36/3	7	32
36/4	8	33
37/1	9	34
37/2	10	35
37/3	11	36
37/4	12	37
38/1	13	38
38/2	14	39
38/3	15	40
38/4	16	41

Port Mapping Table for Building Cisco 6130 Cables

Table B-13 provides the Champ pins and Cisco 6130 port mapping information needed to build your own chassis cables.

Table B-13: Port Mapping for Building Cisco 6130 Cables

Connector	Champ Pins		Cisco 6130 Slot/Line
	Tip	Ring
J39 xDSL Slots 3 through 8 (pins 25 and 50 are not used)	1	2	6/1
	3	4	6/2
	5	6	6/3
	7	8	6/4
	9	10	7/1
	11	12	7/2
	13	14	7/3
	15	16	7/4
	17	18	8/1
	19	20	8/2
	21	22	8/3
	23	24	8/4
	26	27	5/1
	28	29	5/2
	30	31	5/3
	32	33	5/4
	34	35	4/1
	36	37	4/2
	38	39	4/3
	40	41	4/4
	42	43	3/1
	44	45	3/2
	46	47	3/3
	48	49	3/4
J40 xDSL Slots 1, 2, 21, and 22 (pins 9 through 25 are not used)	1	2	22/1
	3	4	22/2
	5	6	22/3
	7	8	22/4
	26	27	21/1
	28	29	21/2
	30	31	21/3
	32	33	21/4
	34	35	2/1
	36	37	2/2
	38	39	2/3
	40	41	2/4
	42	43	1/1
	44	45	1/2
	46	47	1/3
	48	49	1/4
J41 xDSL Slots 23 through 23 (pins 25 and 50 are not used)	1	2	26/1
	3	4	26/2
	5	6	26/3
	7	8	26/4
	9	10	27/1
	11	12	27/2
	13	14	27/3
	15	16	27/4
	17	18	28/1
	19	20	28/2
	21	22	28/3
	23	24	28/4
	26	27	25/1
	28	29	25/2
	30	31	25/3
	32	33	25/4
	34	35	24/1
	36	37	24/2
	38	39	24/3
	40	41	24/4
	42	43	23/1
	44	45	23/2
	46	47	23/3
	48	49	23/4
J42 xDSL Slots 13 through 18 (pins 25 and 50 are not used)	1	2	17/1
	3	4	17/2
	5	6	17/3
	7	8	17/4
	9	10	18/1
	11	12	18/2
	13	14	18/3
	15	16	18/4
	17	18	13/1
	19	20	13/2
	21	22	13/3
	23	24	13/4
	26	27	16/1
	28	29	16/2
	30	31	16/3
	32	33	16/4
	34	35	15/1
	36	37	15/2
	38	39	15/3
	40	41	15/4
	42	43	14/1
	44	45	14/2
	46	47	14/3
	48	49	14/4
J43 xDSL Slots 19, 20, 37, and 38 (pins 9 through 25 and 50 are not used)	1	2	20/1
	3	4	20/2
	5	6	20/3
	7	8	20/4
	26	27	19/1
	28	29	19/2
	30	31	19/3
	32	33	19/4
	34	35	38/1
	36	37	38/2
	38	39	38/3
	40	41	38/4
	42	43	37/1
	44	45	37/2
	46	47	37/3
	48	49	37/4
J44 xDSL Slots 31 through 36 (pins 25 and 50 are not used)	1	2	35/1
	3	4	35/2
	5	6	35/3
	7	8	35/4
	9	10	36/1
	11	12	36/2
	13	14	36/3
	15	16	36/4
	17	18	31/1
	19	20	31/2
	21	22	31/3
	23	24	31/4
	26	27	34/1
	28	29	34/2
	30	31	34/3
	32	33	34/4
	34	35	33/1
	36	37	33/2
	38	39	33/3
	40	41	33/4
	42	43	32/1
	44	45	32/2
	46	47	32/3
	48	49	32/4

Standard Telco Color Chart

In designing the cables for the Cisco 6130 with NI-2 system connections, Cisco used a standard telco color chart. Table B-14 lists the colors used for the Cisco 6130 with NI-2 system cables.

Table B-14: Standard Telco Color Chart

Wire Color	P1	Wire Color	P2		Wire Color	P1	Wire Color	P2
Wht/blu	1	Wht/blu	1		Grn/blk	38	Grn/blk	38
Blu/wht	26	Blu/wht	26		Blk/brn	14	Blk/brn	14
Wht/org	2	Wht/org	2		Brn/blk	39	Brn/blk	39
Org/wht	27	Org/wht	27		Blk/gry	15	Blk/gry	15
Wht/grn	3	Wht/grn	3		Gry/blk	40	Gry/blk	40
Grn/wht	28	Grn/wht	28		Yel/blu	16	Yel/blu	16
Wht/brn	4	Wht/brn	4		Blu/yel	41	Blu/yel	41
Brn/wht	29	Brn/wht	29		Yel/org	17	Yel/org	17
Wht/gry	5	Wht/gry	5		Org/yel	42	Org/yel	42
Gry/wht	30	Gry/wht	30		Yel/grn	18	Yel/grn	18
Red/blu	6	Red/blu	6		Grn/yel	43	Grn/yel	43
Blu/red	31	Blu/red	31		Yel/brn	19	Yel/brn	19
Red/org	7	Red/org	7		Brn/yel	44	Brn/yel	44
Org/red	32	Org/red	32		Yel/gry	20	Yel/gry	20
Red/grn	8	Red/grn	8		Gry/yel	45	Gry/yel	45
Grn/red	33	Grn/red	33		Vio/blu	21	Vio/blu	21
Red/brn	9	Red/brn	9		Blu/vio	46	Blu/vio	46
Brn/red	34	Brn/red	34		Vio/org	22	Vio/org	22
Red/gry	10	Red/gry	10		Org/vio	47	Org/vio	47
Gry/red	35	Gry/red	35		Vio/grn	23	Vio/grn	23
Blk/blu	11	Blk/blu	11		Grn/vio	48	Grn/vio	48
Blu/blk	36	Blu/blk	36		Vio/brn	24	Vio/brn	24
Blk/org	12	Blk/org	12		Brn/vio	49	Brn/vio	49
Org/blk	37	Org/blk	37		Vio/gry	25	Vio/gry	25
Blk/grn	13	Blk/grn	13		Gry/vio	50	Gry/vio	50

Posted: Fri Aug 11 15:45:35 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.