Technical Specifications

This appendix provides the technical specifications for the Cisco 6130 with NI-2 system. The appendix contains the following sections:

Note For information on site and safety requirements, see "Preparing for Installation."

Hardware Specifications

This section details the specifications for the following hardware components:

Cisco 6130 with NI-2 system
Quad-port DMT-2 ATU-C line card (4xDMT-2)
Quad-port flexi ATU-C line card (4xflexi)
Quad-port STU-C line card (4xSDSL)
DS3/2DS3 NI-2 card
OC-3c/OC-3c NI-2 card

Cisco 6130 with NI-2 System

Table A-1 lists the hardware specifications of the Cisco 6130 with NI-2 system.

Table A-1: Hardware Specifications

Specification Description

Dimensions

Cisco 6130
Cisco 6120
Fan tray

9 RUs¹--23 in. x 15.75 in. x 12 in. (58.42 cm x 40.005 cm x 30.48 cm)
4 RUs--23 in. x 7 in. x 12 in. (58.42 cm x 17.78 cm x 30.48 cm)
2 RUs--23 in. x 3.5 in. x 12 in. (58.42 cm x 8.89 cm x 30.48 cm)

Weight

Cisco 6130

Cisco 6120

Fan tray

Empty--approximately 31 lb (14.06 kg)
Loaded--approximately 62 lb (28.12 kg)
Empty--approximately 16 lb (7.26 kg)
Loaded--approximately 34 lb (15.42 kg)
Loaded--approximately 18.45 lb (8.37 kg)

Network interface

ATM OC-3c (single- or multimode fiber), ATM DS3

ADSL interface

CAP--Up to 7.168 Mbps downstream/1.088 Mbps upstream
DMT-2--Up to 8.032 Mbps downstream/864 kbps upstream
G.lite--Up to 1.536 Mbps downstream/512 kbps upstream

SDSL interface

2B1Q up to 1168 kbps upstream and downstream

Craft interface

Console terminal connection on the NI-2 card

Management access

RJ-45 interface for craft alarm discovery

RJ-45 Ethernet

ATM in-band management

External alarm contacts

Single dry contact alarm input (NO)

Power requirements

-48 VDC

Note See "Preparing for Installation" for detailed power requirements.

CO operating requirements

Temperature

Altitude
Humidity

41 to 104ºF (5 to 40ºC)--Operating
23 to 163ºF (-5 to 50ºC)--Short term operating
-60 meters to 3200 meters
5 to 90% (noncondensing)

Subtending

NI-2 card

¹RU = rack unit. An RU is equal to 1.75 inches (4.45 cm).

Quad-Port DMT-2 ATU-C Line Card

Table A-3 lists the specifications for the 4xDMT-2.

Table A-2: Quad-Port DMT-2 ATU-C Line Card Specifications

Specification Description

Standards supported

ITU G.dmt
ITU G.lite
ANSI T1.413 Issue 2

External interfaces

4 (no connectors on card)

Data rates (per port)

Upstream: Up to 864 kbps
Downstream: Up to 8.032 Mbps

Internal hardware

18 MHz AM186ESLV.2 CPU

AD20msp918 DMT modem chipset

128 KB SRAM

256K x 16 boot flash

2 kb serial EEPROM

Dimensions

Height: 6.07 in. (15.42 cm)
Depth: 8.50 in. (21.59 cm)
Width: 0.88 in. (2.24 cm)

Weight

0.875 lb (0.4 kg)

Power consumption

16.5W

Specification	Description
Standards supported	ITU G.dmt ITU G.lite ANSI T1.413 Issue 2
External interfaces	4 (no connectors on card)
Data rates (per port)	Upstream: Up to 864 kbps Downstream: Up to 8.032 Mbps
Internal hardware	18 MHz AM186ESLV.2 CPU AD20msp918 DMT modem chipset 128 KB SRAM 256K x 16 boot flash 2 kb serial EEPROM
Dimensions	Height: 6.07 in. (15.42 cm) Depth: 8.50 in. (21.59 cm) Width: 0.88 in. (2.24 cm)
Weight	0.875 lb (0.4 kg)
Power consumption	16.5W

Quad-Port Flexi ATU-C Line Card

Table A-3 lists the specifications for the 4xflexi.

Table A-3: Quad-Port Flexi ATU-C Line Card Specifications

Specification DMT-2 Mode CAP Mode G.lite Mode

Standards supported

ITU G.dmt (G.992.1)
ANSI T1.413 Issue 2

RADSL¹

ITU G.lite (G.992.2)

Power consumption

17.5W

13.5W

13.5W

Maximum data rates (per port)

Downstream

Upstream

8.032 Mbps

864 kbps

7.168 Mbps

1.088 Mbps

1.536 Mbps

512 kbps

External interfaces

4 (no connectors on card)

Internal hardware

AMD 186-based 3.3V 18-MHz CPU

128 KB SRAM

512K flash

Dimensions

Height: 6.07 in. (15.42 cm)
Depth: 8.50 in. (21.59 cm)
Width: 0.88 in. (2.24 cm)

Weight

0.875 lb (0.4 kg)

¹Rate-adaptive digital subscriber line.

Specification	DMT-2 Mode	CAP Mode	G.lite Mode
Standards supported	ITU G.dmt (G.992.1) ANSI T1.413 Issue 2	RADSL¹	ITU G.lite (G.992.2)
Power consumption	17.5W	13.5W	13.5W
Maximum data rates (per port) Downstream Upstream	8.032 Mbps 864 kbps	7.168 Mbps 1.088 Mbps	1.536 Mbps 512 kbps
External interfaces	4 (no connectors on card)
Internal hardware	AMD 186-based 3.3V 18-MHz CPU 128 KB SRAM 512K flash
Dimensions	Height: 6.07 in. (15.42 cm) Depth: 8.50 in. (21.59 cm) Width: 0.88 in. (2.24 cm)
Weight	0.875 lb (0.4 kg)

Quad-Port STU-C Line Card

Table A-4 lists the specifications for the 4xSDSL.

Table A-4: SDSL Line Card Specifications

Specification Description

Standards supported

ITU G.991.1

External interfaces

4 (no connectors on card)

Maximum data rates (per port)

Downstream

Upstream

1168 kbps

1168 kbps

Line encoding

2B1Q

Internal hardware

AMD 186-based 3.3V 18-MHz CPU

128 KB SRAM

512K flash

Dimensions

Height: 6.07 in. (15.42 cm)
Depth: 8.50 in. (21.59 cm)
Width: 0.88 in. (2.24 cm)

Weight

0.875 lb (0.4 kg)

Power consumption

9W

DS3/2DS3 NI-2 Card

Table A-5 lists the specifications for the DS3/2DS3 NI-2 card.

Table A-5: DS3/2DS3 NI-2 Card Specifications

Specification Description

Internal hardware

150 MHz RC64475 CPU
Galileo GT64120 system controller
1M x 32 bootflash
4M x 32 Flash
512 KB boot EPROM

Dimensions

Height: 12.38 in. (31.45 cm)
Depth: 8.50 in. (21.59 cm)
Width: 1.80 in. (4.57 cm)

Weight

3.0 lb (1.36 kg)

Level 2 protocol

ATM

External interfaces

Three DS3 (44.736-Mbps) coaxial ports

Connector type

BNC¹

Impedance

75 ohms (nominal)

Line encoding

B3ZS

Framing

C-bit parity, optionally PLCP with M23, otherwise Add Drop Multiplexer (ADM)

Power consumption

33.5W

¹The Bayonet-Neill-Concelman (BNC) connectors are located on the system I/O card which is installed on the backplane of the chassis.

OC-3c/OC-3c NI-2 Card

Table A-6 lists the specifications of the single-mode and multimode versions of the OC-3c/OC-3c NI-2 card.

Table A-6: OC-3c/OC-3c NI-2 Card Specifications

Specification Description

Internal hardware

150 MHz RC64475 CPU
Galileo GT64120 system controller
1M x 32 bootflash
4M x 32 Flash
512 KB boot EPROM

Dimensions

Height: 12.38 in. (31.45 cm)
Depth: 8.50 in. (21.59 cm)
Width: 1.80 in. (4.57 cm)

Weight

3.0 lb (1.36 kg)

Level 2 protocol

ATM

Power consumption

33.5W

Single Mode Card Multimode Card

External interfaces

Two OC-3c/STM-1 (155 Mbps) single-mode ports

Two OC-3c/STM-1 (155 Mbps) multimode ports

Connector type

SC-PC

SC-PC

Fiber type

Intermediate reach single mode

Multimode

Average transmitted power

-15 to -8 dBm

-20 to -14 dBm

Average received power

-8 dBm

-11 dBm

Transmission distance

Up to 20 km (12 miles)

Up to 2 km (1.2 miles)

Wavelength

1310 nm

1300 nm

Software Specifications

Table A-7 lists Cisco 6130 with NI-2 system software specifications.

Table A-7: Software Specifications

Specification Description

Management protocols

IOS software support for SNMP to CEMF¹

Management applications

IOS² Release 12.1(2)DA

CDM³ Release 3.2

Management interfaces

In band--ATM VC

Out of band--10BaseT Ethernet, console, auxiliary

¹CEMF = Cisco Element Management Framework
²IOS = Internet Operating System
³CDM = Cisco DSL Manager

Table of Contents

Technical Specifications