Technical Specifications

Table A-1: Hardware Specifications

Specification		Description
Dimensions	Cisco 6130 Cisco 6120 Fan tray	9 RUs1---23 in. x 15.75 in. x 12 in. (58.42 cm x 40.005 cm x 30.48 cm) 4 RUs---23 in. x 7 in. x 12 in. (58.42 cm x 17.78 cm x 30.48 cm) 2 RUs---23 in. x 3.5 in. x 12 in. (58.42 cm x 8.89 cm x 30.48 cm)
Weight	Cisco 6130 Cisco 6120 Fan tray	Empty---approximately 31 lb (14.06 kg) Loaded---approximately 62 lb (28.12 kg) Empty---approximately 16 lb (7.26 kg) Loaded---approximately 34 lb (15.42 kg) Loaded---approximately 18.45 lb (8.37 kg)
Network interface		ATM OC-3c (single- or multimode fiber), ATM DS3
ADSL interface		CAP---Up to 7.168 Mbps downstream/1.088 Mbps upstream DMT-2---Up to 8.032 Mbps downstream/864 kbps upstream G.lite---Up to 1.536 Mbps downstream/512 kbps upstream
SDSL interface		2B1Q up to 1168 kbps upstream and downstream
Craft interface		EIA/TIA-232
Power requirements		-48 VDC Note See "Preparing for Installation" for detailed power requirements.
CO operating requirements	Temperature Altitude Humidity	41 to 104ºF (5 to 40ºC)---Operating 23 to 163ºF (-5 to 50ºC)---Short term operating -60 meters to 3200 meters 5 to 90% (noncondensing)
Subtending		Dual-port DS3 STM2

1RU = rack unit. An RU is equal to 1.75 inches (4.45 cm). 2STM = subtend host module.

Table A-2: Software Specifications

Specification	Description
Management protocols	Software architecture support for SNMP to NMS
Management applications	Local craft interface---ViewRunner for Windows (included) ViewRunner EMS---ViewRunner for HP OpenView (additional)
Management interfaces	EIA/TIA-232 (craft interface) 10BaseT Ethernet/LAN interface In-band ATM through the network interface