cc/td/doc/product/dsl_prod/c600s/c627
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

System Specifications

System Specifications

B.1 Physical Specifications

Dimensions

Weight

B.2 Interface Specifications

LAN Interface

Management Interface

ADSL Interface

B.3 Software Upgrade

B.4 Power and Operating Requirements

Power Requirements

Operating Requirements

B.5 DMT Issue 2 Transmission Specifications

Table B-1 shows the DMT Issue 2 Rate Adaptive DSL transmission specifications.


Table B-1:
Type of Device Specification Downstream Upstream

X MB modem

Maximum Transmit Power

-36.5 dBm

-38 dBm

Rate@5Kft

9200 Kbaud

800 Kbaud

Spectrum

138-1104 KHz

26-138 KHz

Bandwidth

966 KHz

112 KHz

DMT Issue 2 Transmission Specifications

B.6 Regulatory Approvals

B.7 FCC Part 15 Statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

B.8 Industry Canada Statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sure le matériel brouilleur du Canada.


hometocprevnextglossaryfeedbacksearchhelp
Posted: Mon Oct 4 12:59:01 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.