Overview

EMS Terms

EMS Views

NetView

Inter Node Provisioning Window

Node View

NE Provision Window

Plugin Slot Provision Window

Plugin Card Provision Window

Line Provision Window

Navigating EMS

Using the Mouse

Selecting Icons

Highlighting List Entries

Entering Data

Using Common Buttons

Overview

The Cisco 6700 Series Element Management System (EMS) is a powerful operations and management tool with a graphical user interface. EMS enables users to provision, manage, and monitor up to 2,500 nodes within the network.

EMS Terms

Table 1-1: describes some of the terms used throughout this EMS guide.

Table 1-1:: EMS Terms

Term Definition

NE

Network element—The physical Cisco 6732, Cisco 6705, or Cisco IAD1101 chassis.

node

The EMS representation of an NE in the network (shown as an icon in the EMS NetView).

slot

A space in the NE chassis used to house a card.

card

A modular element placed in a slot of the chassis. A card that provides one or more user traffic interfaces (lines) is called a line card; a card that does not offer user traffic interfaces is called a common card.

line

An interface designed to carry user traffic (data or voice) across the network.

port

An interface designed to carry non-user traffic (such as management traffic) from the NE to a network device or workstation.

Term	Definition
NE	Network element—The physical Cisco 6732, Cisco 6705, or Cisco IAD1101 chassis.
node	The EMS representation of an NE in the network (shown as an icon in the EMS NetView).
slot	A space in the NE chassis used to house a card.
card	A modular element placed in a slot of the chassis. A card that provides one or more user traffic interfaces (lines) is called a line card; a card that does not offer user traffic interfaces is called a common card.
line	An interface designed to carry user traffic (data or voice) across the network.
port	An interface designed to carry non-user traffic (such as management traffic) from the NE to a network device or workstation.

EMS Views

Table 1-2: describes the different windows (views) seen in EMS.

Table 1-2:: EMS Views

View Description How to Open How to Close

NetView

A view of the network, using icons to represent installed nodes. Individual nodes are created and modified in NetView.

NetView appears when EMS is initially launched.

Select File > Exit from the menu bar. This closes EMS.

Inter node provision window

A special display used to configure connections between nodes.

From NetView, click the Inter Node Provision button at the top right of the window.

Select File > Exit from the menu bar to return to NetView.

Node view

A graphic representation of a Cisco 6732, Cisco 6705, or Cisco IAD1101 chassis, complete with installed cards. Lines and cards are provisioned from node view.

From NetView, double-click a node, or right-click a node and select Node View from the popup menu.

Select File > Exit from the menu bar to return to NetView.

NE provision window

A window used to set important NE parameters such as IP address, timing source, and node ID.

From node view, double-click the node nameplate (located at the top of the screen).

Select Exit from the function bar to return to node view.

Plugin slot provision window

A window used to provision a slot for a particular card.

From node view, double-click any empty slot.

Select Exit from the function bar to return to node view.

Plugin card provision window

A window used to set individual card settings.

From node view, double-click any card.

Select Exit from the function bar to return to node view.

Line provision window

A window used to set individual line settings and parameters.

From node view, double-click any line.

Select Exit from the function bar to return to node view.

View	Description	How to Open	How to Close
NetView	A view of the network, using icons to represent installed nodes. Individual nodes are created and modified in NetView.	NetView appears when EMS is initially launched.	Select File > Exit from the menu bar. This closes EMS.
Inter node provision window	A special display used to configure connections between nodes.	From NetView, click the Inter Node Provision button at the top right of the window.	Select File > Exit from the menu bar to return to NetView.
Node view	A graphic representation of a Cisco 6732, Cisco 6705, or Cisco IAD1101 chassis, complete with installed cards. Lines and cards are provisioned from node view.	From NetView, double-click a node, or right-click a node and select Node View from the popup menu.	Select File > Exit from the menu bar to return to NetView.
NE provision window	A window used to set important NE parameters such as IP address, timing source, and node ID.	From node view, double-click the node nameplate (located at the top of the screen).	Select Exit from the function bar to return to node view.
Plugin slot provision window	A window used to provision a slot for a particular card.	From node view, double-click any empty slot.	Select Exit from the function bar to return to node view.
Plugin card provision window	A window used to set individual card settings.	From node view, double-click any card.	Select Exit from the function bar to return to node view.
Line provision window	A window used to set individual line settings and parameters.	From node view, double-click any line.	Select Exit from the function bar to return to node view.

Each view is further detailed in the following sections.

NetView

Cisco 6700 NetView appears when EMS is initially launched. It displays the topology of the network. (See Figure 1-1.) From NetView, all nodes, subnets, and end node lists can be created or modified. (See "NetView`, for provisioning information.)

Figure 1-1: NetView

Inter Node Provisioning Window

The inter node provisioning window is used to provision connections between two or more NEs. (See Figure 1-2.) By clicking the visual links drawn between nodes, you can create, modified, or delete internode connections. (See Provisioning Inter Node Connections for provisioning information.)

Figure 1-2: Internode Provisioning Window

Node View

The EMS node view provides a graphical representation of an NE, complete with installed cards and LEDs. (See Figure 1-3, Figure 1-4, and Figure 1-5.) Use node view to provision all slots, cards, and lines in the NE. (See "Node View,"for provisioning information.)

Figure 1-3: Cisco 6732 Node View

Figure 1-4: Cisco 6705 Node View

Figure 1-5: Cisco IAD1101 Node View

NE Provision Window

The NE provision window is used to provision important NE parameters. To open the NE provision window, double-click the node nameplate in node view. (See Figure 1-6.) See "Provisioning the NE,"on page 10, and "Node View," for provisioning information.

Figure 1-6: Node Nameplate

Double-clicking the node nameplate launches the NE provision window. (See Figure 1-7.) The left side of the display contains the function bar, a group of buttons used to navigate the NE provision window.

Figure 1-7: N E Provision Window and Function Bar

In Figure 1-7, note that two b uttons are grayed out in the button bar: System Basic Provisioning and Timing Distribution Provisioning. The System Basic Provisioning button is grayed to indicate that the system basic provisioning window is open. To open a different provisioning window, click one of the other buttons in the function bar. The Timing Distribution Provisioning button is reserved for future use.

Plugin Slot Provision Window

The plugin slot provision window (see Figure 1-8) is used to provision a slot for a particular type of card. See Chapter 4, "Node View", for provisioning information.

Figure 1-8: Plugin Slot Provisioning Window

Plugin Card Provision Window

The plugin card provision window (see Figure 1-9) is used to set slot and card parameters, such as card type and administrative status (in service or out of service). See the "Placing Cards In Service" section, for provisioning information.

Figure 1-9: Plugin Card Provision Window

Line Provision Window

The line provision window (see Figure 1-10) is used to provision individual line parameters. Each type of line card uses a different line provision window; Figure 1-10 shows the line provision window for a DSX1/8 card. (See "Provisioning Lines", for provisioning information.)

Figure 1-10: DSX1/8 Line Provision Window

Navigating EMS

The following sections describe the basic navigational techniques used to enter data and provision the NE.

Using the Mouse

The following terms are used in this guide to describe actions involving the mouse:

Highlight—Position the cursor over an icon and press the left mouse button.
Click—Press the left mouse button once.
Double-click—Press the left mouse button twice in rapid succession.
Right-click—Press the right mouse button once.
Click and drag—Press and hold the left mouse button while moving (dragging) the cursor.

Selecting Icons

To select an individual icon, position the cursor over the icon. The icon turns orange when the cursor is positioned over the icon. Click, right-click, or double-click the highlighted icon.

Highlighting List Entries

Selecting one or more entries from an EMS list is referred to as highlighting the entries.

To highlight one entry in a list, position the cursor over the entry and press the left mouse button.
To highlight multiple entries in a list, perform the following steps:
- Position the cursor over the first entry in the list.
- Press and hold the left mouse button.
- Drag the cursor to the last entry in the list.
- Release the left mouse button.

Entering Data

The node information window (see Figure 1-11) is used to describe several methods of entering data in EMS.

Figure 1-11: Node Information Window

Text box—The Name, Alias, and IP Address fields use text boxes for data entry. Position the cursor in the text field and enter text. You may move from one text box to the next by pressing the <Tab> key. For example, in the IP Address field, enter the first number, then press <Tab> to move to the next text box.
Pull-down list—The Type field uses a pull-down list for data entry. Click the small rectangle at the right side of the list. EMS displays a list of choices; click the desired entry in the list.
Slider bar—The Node ID field uses a slider bar for data entry. There are two ways to enter data in a slider bar field:
- Click and drag the slider bar. The number (to the left of the bar) changes according to the position of the slider bar. Release the bar to set the desired entry.
- Highlight the number to the left of the slider bar, and type the desired entry.

Using Common Buttons

The following buttons appear in many EMS windows:

Clear—Erases all text in the user-definable fields of a provisioning window.
Dismiss—Closes the current window, without making provisioning changes.
Refresh—Updates the display. After provisioning a node, slot, card, or line, press Refresh to redraw the current display and reflect all provisioning changes.

Table of Contents

Overview