System Specifications

Table A-1 lists specifications for the Cisco 6400 universal access concentrator (UAC).

Table A-1: Cisco 6400 UAC Specifications

Description Specifications

Switch capacity

5 Gbps¹ shared memory, nonblocking switch fabric
65,536 cells of ATM cell buffers

Software images

Default image
PNNI and plug-and-play capacity

Dimensions (H x W x D)

21.75 in. x 17.5 in. x 12.0 in. (55.2 cm x 44.4 cm x 30.4 cm) standard 19-in. rack mount
Chassis depth with optional cable cover is 13.75 in. (34.9 cm)
NSP: 16.0 in. x 2.0 in. x 10.0 in. (40.6 cm x 5.0 cm x 25.4 cm)
NRP: 16.0 in x 1.2 in x 10.0 in (40.6 cm x 3.0 cm x 25.4 cm)
OC-3/STM-1 NLC: 7.0 in. x 1.2 in. x 10.0 in. (17.7 cm x 3.0 cm x 25.4 cm)
DS3 NLC: 7.0 in. x 1.2 in. x 10.0 in. (17.7 cm x 3.0 cm x 25.4 cm)
OC-12/STM-4 NLC: 16.0 in. x 1.2 in. x 10.0 in. (40.6 cm x 3.0 cm x 25.4 cm)

Weight

Chassis minimum configuration (1 NSP, 1 PEM): 80 lb (37 kg)
Chassis fully configured (2 NSPs, 6 NRPs, 4 OC-3/STM-1 or 4 DS3 or 2 OC-12/STM-4 NLCs, and 2 PEMs): 130 lb (59 kg)

Input power requirement

1200W maximum (PEM-PWR-DC) (DC version)
1400W maximum (PEM-PWR-AC) (AC version)

Power dissipation

1200W maximum, 900W typical with maximum configuration

Heat dissipation

1200W (3768 Btu²/hr) (DC version)
1400W (4760 Btu/hr) (AC version)

DC input voltage range

-40.5 to -72 VDC (rated -48/-60 VDC)

DC current rating (input)

Maximum power budget: 20A @ -48 VDC

AC input voltage range

90 to 255 VAC (rated 100 to 240 VAC using AC PEM)

(See Cisco 6400 UAC Hardware Installation and Maintenance Guide, Appendix D for AC power shelf ratings)

AC current rating (input)

15A @ 100 VAC, 7A @ 240 VAC, using AC PEM

(See Cisco 6400 UAC Hardware Installation and Maintenance Guide, Appendix D for AC power shelf ratings)

Airflow

140 cfm³ through the system blower module

200 cfm through the system blower module when the exhaust temperature exceeds 40ºC

Operating temperature range

25 to 104ºF (-4 to 40ºC)

Short-term operating temperature is limited to 131ºF (55ºC) in compliance with
Bellcore GR-63

Nonoperating temperature range

-40 to 167ºF (-40 to 75ºC)

Humidity

5 to 95%, noncondensing

Altitude

-200 to 10,000 ft (-61 to 3048 m)

Interface timing

Loop timing, network timing derived from any NLC interface, Stratum 4 accuracy when internally timed. NSP-S3B also allows network timing from CO BITS, Stratum 3 accuracy when internally timed.

Node switch processor (NSP)

64 MB DRAM, 8 MB Flash memory, 20 MB FlashDisk card (C6400-NSP-1)
Upgradeable to 128 MB DRAM (MEM-NSP-128M)
Upgradeable with 350 MB Flash disk (MEM-NSP-FD350)

Node route processor (NRP)

64 MB DRAM, 8 MB Flash memory (C6400-NRP-1)
Upgradeable to 128 MB DRAM (MEM-NRP-128M)
Upgradeable to 16 MB Flash memory (MEM-NRP-FS16M)

Full-height node line card (NLC) carrier module

Carrier module for 2 half-height NLCs with covers for empty slots installed (C6400-CARRIER)

OC-3/STM-1 NLC

NLC with 2 SONET STS-3c/SDH STM-1 single-mode intermediate reach fiber ports,
SC connectors (NLC-2OC3-SM)

Fiber-optic power levels:

OC-3 single-mode intermediate reach

Output center wavelength

Transmit

Receive

1261 to 1360 nm⁴

Minimum: -14.0 dBm
Maximum: -8.0 dBm

Minimum: -32.5 dBm
Maximum: -8.0 dBm

DS3 NLC

NLC with 2 coaxial cable connections with BNC connectors (NLC-2DS3-BNC)

Maximum station-to-station cabling distance is 450 ft (137 m)

OC-12/STM-4 NLC

NLC with 1 SONET STS-12c/SDH STM-4 single-mode intermediate reach fiber ports, SC connector (NLC-1OC12-SM)

Fiber-optic power levels:

OC-12 single-mode intermediate reach

Output center wavelength

Transmit

Receive

1261 to 1360 nm
Minimum: -15.0 dBm⁵Maximum: -8.0 dBm

Minimum: -28.0 dBm
Maximum: -8.0 dBm

NSP interface ports

RJ-45 IEEE 802.3 Ethernet 10BaseT
RJ-45 auxiliary (AUX) port for modem access
RJ-45 console (CON) port for terminal access

ATM connections

32,000 point-to-point, 2048 point-to-multipoint (maximum)

Network management

Port TX and RX LEDs, switch and common equipment status LEDs
Port snooping and connection steering
Multiple standard and enterprise MIBs
Text-based command-line interface based on familiar router interface
Standard Cisco IOS security capabilities: password and TACACS,
Telnet, TFTP, BOOTP, LAN Emulation client, RFC 1577 Classical IP over
ATM client (for management access)

Mean time between failures

17 years per RIN

Maximum
station-to-station cabling distance

10BaseT Ethernet---Category 3-5 UTP: 328 ft (100 m)
ATM single-mode---8/125-micron single-mode fiber: 9 miles (15 km)

Agency Approvals

Safety:
UL 1950, CSA-C22.2 No. 950-95, EN60950,
ACA TS001, AS/NZS 3260, IEC 950

Emission:
47CFR15 Class B (FCC), CISPR22 Class B, EN55022 Class B, AS/NZS 3548 Class B, ICES-003 Class B, VCCI Class B, BSMI (CNS 13438) Class B, IEC1000-3-2, IEC1000-3-3

Immunity:
EN61000-4-2/IEC-61000-4-2,
EN61000-4-3/IEC-61000-4-3,
EN61000-4-4/IEC-61000-4-4,
EN61000-4-5/IEC-61000-4-5,
EN61000-4-6/IEC-61000-4-6
EN61000-4-11/IEC-61000-4-11

Bellcore:
GR-63-CORE, GR-1089-CORE, SR-3580 NEBS Level 3

ETS I:
EN 300 386-2

¹Gbps = gigabits per second
²Btu = British thermal units
³cfm = cubic feet per minute
⁴nm = nanometers
5 dBm = decibels referenced to 1 milliwatt

Description	Specifications
Switch capacity	5 Gbps¹ shared memory, nonblocking switch fabric 65,536 cells of ATM cell buffers
Software images	Default image PNNI and plug-and-play capacity
Dimensions (H x W x D)	21.75 in. x 17.5 in. x 12.0 in. (55.2 cm x 44.4 cm x 30.4 cm) standard 19-in. rack mount Chassis depth with optional cable cover is 13.75 in. (34.9 cm) NSP: 16.0 in. x 2.0 in. x 10.0 in. (40.6 cm x 5.0 cm x 25.4 cm) NRP: 16.0 in x 1.2 in x 10.0 in (40.6 cm x 3.0 cm x 25.4 cm) OC-3/STM-1 NLC: 7.0 in. x 1.2 in. x 10.0 in. (17.7 cm x 3.0 cm x 25.4 cm) DS3 NLC: 7.0 in. x 1.2 in. x 10.0 in. (17.7 cm x 3.0 cm x 25.4 cm) OC-12/STM-4 NLC: 16.0 in. x 1.2 in. x 10.0 in. (40.6 cm x 3.0 cm x 25.4 cm)
Weight	Chassis minimum configuration (1 NSP, 1 PEM): 80 lb (37 kg) Chassis fully configured (2 NSPs, 6 NRPs, 4 OC-3/STM-1 or 4 DS3 or 2 OC-12/STM-4 NLCs, and 2 PEMs): 130 lb (59 kg)
Input power requirement	1200W maximum (PEM-PWR-DC) (DC version) 1400W maximum (PEM-PWR-AC) (AC version)
Power dissipation	1200W maximum, 900W typical with maximum configuration
Heat dissipation	1200W (3768 Btu²/hr) (DC version) 1400W (4760 Btu/hr) (AC version)
DC input voltage range	-40.5 to -72 VDC (rated -48/-60 VDC)
DC current rating (input)	Maximum power budget: 20A @ -48 VDC
AC input voltage range	90 to 255 VAC (rated 100 to 240 VAC using AC PEM) (See Cisco 6400 UAC Hardware Installation and Maintenance Guide, Appendix D for AC power shelf ratings)
AC current rating (input)	15A @ 100 VAC, 7A @ 240 VAC, using AC PEM (See Cisco 6400 UAC Hardware Installation and Maintenance Guide, Appendix D for AC power shelf ratings)
Airflow	140 cfm³ through the system blower module 200 cfm through the system blower module when the exhaust temperature exceeds 40ºC
Operating temperature range	25 to 104ºF (-4 to 40ºC) Short-term operating temperature is limited to 131ºF (55ºC) in compliance with Bellcore GR-63
Nonoperating temperature range	-40 to 167ºF (-40 to 75ºC)
Humidity	5 to 95%, noncondensing
Altitude	-200 to 10,000 ft (-61 to 3048 m)
Interface timing	Loop timing, network timing derived from any NLC interface, Stratum 4 accuracy when internally timed. NSP-S3B also allows network timing from CO BITS, Stratum 3 accuracy when internally timed.
Node switch processor (NSP)	64 MB DRAM, 8 MB Flash memory, 20 MB FlashDisk card (C6400-NSP-1) Upgradeable to 128 MB DRAM (MEM-NSP-128M) Upgradeable with 350 MB Flash disk (MEM-NSP-FD350)
Node route processor (NRP)	64 MB DRAM, 8 MB Flash memory (C6400-NRP-1) Upgradeable to 128 MB DRAM (MEM-NRP-128M) Upgradeable to 16 MB Flash memory (MEM-NRP-FS16M)
Full-height node line card (NLC) carrier module	Carrier module for 2 half-height NLCs with covers for empty slots installed (C6400-CARRIER)
OC-3/STM-1 NLC	NLC with 2 SONET STS-3c/SDH STM-1 single-mode intermediate reach fiber ports, SC connectors (NLC-2OC3-SM)
Fiber-optic power levels: OC-3 single-mode intermediate reach Output center wavelength Transmit Receive	1261 to 1360 nm⁴ Minimum: -14.0 dBm Maximum: -8.0 dBm Minimum: -32.5 dBm Maximum: -8.0 dBm
DS3 NLC	NLC with 2 coaxial cable connections with BNC connectors (NLC-2DS3-BNC) Maximum station-to-station cabling distance is 450 ft (137 m)
OC-12/STM-4 NLC	NLC with 1 SONET STS-12c/SDH STM-4 single-mode intermediate reach fiber ports, SC connector (NLC-1OC12-SM)
Fiber-optic power levels: OC-12 single-mode intermediate reach Output center wavelength Transmit Receive	1261 to 1360 nm Minimum: -15.0 dBm⁵Maximum: -8.0 dBm Minimum: -28.0 dBm Maximum: -8.0 dBm
NSP interface ports	RJ-45 IEEE 802.3 Ethernet 10BaseT RJ-45 auxiliary (AUX) port for modem access RJ-45 console (CON) port for terminal access
ATM connections	32,000 point-to-point, 2048 point-to-multipoint (maximum)
Network management	Port TX and RX LEDs, switch and common equipment status LEDs Port snooping and connection steering Multiple standard and enterprise MIBs Text-based command-line interface based on familiar router interface Standard Cisco IOS security capabilities: password and TACACS, Telnet, TFTP, BOOTP, LAN Emulation client, RFC 1577 Classical IP over ATM client (for management access)
Mean time between failures	17 years per RIN
Maximum station-to-station cabling distance	10BaseT Ethernet---Category 3-5 UTP: 328 ft (100 m) ATM single-mode---8/125-micron single-mode fiber: 9 miles (15 km)
Agency Approvals	Safety: UL 1950, CSA-C22.2 No. 950-95, EN60950, ACA TS001, AS/NZS 3260, IEC 950 Emission: 47CFR15 Class B (FCC), CISPR22 Class B, EN55022 Class B, AS/NZS 3548 Class B, ICES-003 Class B, VCCI Class B, BSMI (CNS 13438) Class B, IEC1000-3-2, IEC1000-3-3 Immunity: EN61000-4-2/IEC-61000-4-2, EN61000-4-3/IEC-61000-4-3, EN61000-4-4/IEC-61000-4-4, EN61000-4-5/IEC-61000-4-5, EN61000-4-6/IEC-61000-4-6 EN61000-4-11/IEC-61000-4-11 Bellcore: GR-63-CORE, GR-1089-CORE, SR-3580 NEBS Level 3 ETS I: EN 300 386-2

Note If the Cisco 6400 is used in an environment where lightning-induced transients are likely to couple to the signal lines, use of shielded interconnection cables for the 100BaseT ports is highly recommended. In addition, use of shielded interconnection cables for the 100BaseT ports is required to meet Bellcore GR1089 CORE Section 4.5.9 and ETSI section 5.2.2.2 (intrabuilding lightning surge).

Table of Contents

System Specifications

System Specifications