|
|
This preface describes the Cisco 6400 UAC Hardware Installation and Maintenance Guide. This preface defines the objectives, audience, organization, and conventions used in this guide. There is also a list of related documents and instructions for obtaining technical assistance and additional information.
This installation guide presents the initial hardware installation and maintenance procedures for the Cisco 6400 universal access concentrator (UAC). After completing the installation procedures in this guide, use the following companion publications to more completely configure your system:
All additions or upgrades to the Cisco 6400 hardware or software image (firmware) ordered from the factory are accompanied by installation and configuration notes that provide product-specific installation instructions and up-to-date product information.
To use this publication, you should be familiar with Cisco switches, routers, cabling, electronic circuitry, and wiring practices and preferably have experience as an electronic or electromechanical technician. This document provides brief descriptions and examples of some software configuration and display commands. For comprehensive descriptions and examples of software configuration commands and the procedures for implementing them, refer to the Cisco 6400 UAC Software Configuration Guide and the Cisco 6400 UAC Command Reference Guide.
This publication is organized as follows:
Chapter 1 | Describes the chassis components and properties of the Cisco 6400 UAC and provides a functional overview of the system | |
Chapter 2 | Describes the procedure for unpacking the system and components, presents safety recommendations, and lists the tools required for the hardware installation | |
Chapter 3 | Provides instructions for installing the Cisco 6400 UAC hardware and connecting the external network interface cables | |
Chapter 4 | Provides guidelines for troubleshooting the | |
Chapter 5 | Provides simple maintenance procedures you may need to perform after you have installed the Cisco 6400 UAC | |
Appendix A | Describes the physical properties of the Cisco 6400 UAC | |
Appendix B | Defines the acronyms and terms associated with the | |
Appendix C | Includes instructions, examples, and blank worksheets used for the initial installation and subsequent maintenance of the Cisco 6400 UAC | |
Appendix D | Includes instructions for installing the AC power shelf in a rack |
Cisco documentation part numbers used in this manual do not include the version number of the document, to avoid updating the manual each time a part number is changed. For example, the documentation part number for the Regulatory Compliance and Safety Information for the Cisco 6400 UAC is 78-5789-xx.
Command descriptions use these conventions:
Switch# indicates that you are at the privileged level. Access to the privileged level usually requires a password. Refer to the related software configuration and reference publications for additional information.
Examples use these conventions:
screen font.
 | Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. |
Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard maatregelen om ongelukken te voorkomen. Voor vertalingen van de waarschuwingen die in deze publicatie verschijnen, kunt u het document Regulatory Compliance and Safety Information (Informatie over naleving van veiligheids- en andere voorschriften) raadplegen dat bij dit toestel is ingesloten.
Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. Tässä julkaisussa esiintyvien varoitusten käännökset löydät laitteen mukana olevasta Regulatory Compliance and Safety Information -kirjasesta (määräysten noudattaminen ja tietoa turvallisuudesta).
Attention Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant causer des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers posés par les circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions d'avertissements figurant dans cette publication, consultez le document Regulatory Compliance and Safety Information (Conformité aux règlements et consignes de sécurité) qui accompagne cet appareil.
Warnung Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu einer Körperverletzung führen könnte. Bevor Sie mit der Arbeit an irgendeinem Gerät beginnen, seien Sie sich der mit elektrischen Stromkreisen verbundenen Gefahren und der Standardpraktiken zur Vermeidung von Unfällen bewußt. Übersetzungen der in dieser Veröffentlichung enthaltenen Warnhinweise finden Sie im Dokument Regulatory Compliance and Safety Information (Informationen zu behördlichen Vorschriften und Sicherheit), das zusammen mit diesem Gerät delivered ward.
Avvertenza Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di lavorare su qualsiasi apparecchiatura, occorre conoscere i pericoli relativi ai circuiti elettrici ed essere al corrente delle pratiche standard per la prevenzione di incidenti. La traduzione delle avvertenze riportate in questa pubblicazione si trova nel documento Regulatory Compliance and Safety Information (Conformità alle norme e informazioni sulla sicurezza) che accompagna questo dispositivo.
Advarsel Dette varselsymbolet betyr fare. Du befinner deg i en situasjon som kan føre til personskade. Før du utfører arbeid på utstyr, må du vare oppmerksom på de faremomentene som elektriske kretser innebærer, samt gjøre deg kjent med vanlig praksis når det gjelder å unngå ulykker. Hvis du vil se oversettelser av de advarslene som finnes i denne publikasjonen, kan du se i dokumentet Regulatory Compliance and Safety Information (Overholdelse av forskrifter og sikkerhetsinformasjon) som ble levert med denne enheten.
Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação que lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer equipamento, familiarize-se com os perigos relacionados com circuitos eléctricos, e com quaisquer práticas comuns que possam prevenir possíveis acidentes. Para ver as traduções dos avisos que constam desta publicação, consulte o documento Regulatory Compliance and Safety Information (Informação de Segurança e Disposições Reguladoras) que acompanha este dispositivo.
¡Advertencia! Este símbolo de aviso significa peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considerar los riesgos que entraña la corriente eléctrica y familiarizarse con los procedimientos estándar de prevención de accidentes. Para ver una traducción de las advertencias que aparecen en esta publicación, consultar el documento titulado Regulatory Compliance and Safety Information (Información sobre seguridad y conformidad con las disposiciones reglamentarias) que se acompaña con este dispositivo.
Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanligt förfarande för att förebygga skador. Se förklaringar av de varningar som förkommer i denna publikation i dokumentet Regulatory Compliance and Safety Information (Efterrättelse av föreskrifter och säkerhetsinformation), vilket medföljer denna anordning.
For technical information and assistance, use Cisco Connection Online (CCO)---Cisco's primary, real-time support channel.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQs), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
The following is a list of manuals in the Cisco 6400 documentation set:
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or through an annual subscription. You can also access Cisco documetation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback on the toolbar, and then select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
Posted: Mon Nov 22 18:27:57 PST 1999
Copyright 1989-1999©Cisco Systems Inc.
