Cisco 7513 Configuration Notes

• Unpacking the Cisco 7513/7576

• Route Switch Processor (RSP2) Install. and Config.

• Upgrading the RSP2 Boot ROM and Initializing HSA

• Route Switch Processor (RSP4) Installation and Configuration
  9/19/00; updated to incl Mem 4pks, and migration from 11.1CA and 11.1CC due to end of sale.

• Flash Memory Card Installation Instructions

• Using the Flash Disk

• Upgrading SW and Microcode in Cisco 7000/7500 Series Routers

• ATM Interface Processor (AIP) Installation and Configuration

• ATM Cable Interface Processor (ACIP) Install. and Config.

• Channel Interface Processor (CIP) Install. and Config.

• Channel Interface Processor (CIP2) Install. and Config.

• Upgrading DRAM on the CIP2

• Ethernet Interface Processor (EIP) Install. and Config.

• Fast Ethernet Interface Processor (FEIP) Install and Config

• Fast Ethernet Interface Processor (FEIP2) Install. and Config.

• FEIP2-DSW Fast Ethernet Interface Processor Install. and Config

• FDDI Interface Processor (FIP) Install. and Config.

• Using FC-to-SC FDDI Adapters with FDDI NPM and FIP

• Fast Serial Interface Processor (FSIP) Install. and Config.

• FSIP E1-G.703/G.704 Port Adapter Install. and Config.

• Gigabit Ethernet Interface Processor (GEIP) Install. and Config

• HSSI Interface Processor (HIP) Install. and Config.

• Installing the HSSI Cable

• MultiChannel Interface Processor (MIP) Install. and Config.

• Packet OC-3 Interface Processor (POSIP) Install. and Config.

• POSIP-OC3-50 Installation and Configuration

• Channelized T3 Interface Processor (CT3IP) Install. and Config.

• Channelized T3 Interface Processor (CT3IP-50) Inst. and Config.

• Token Ring Interface Processor (TRIP) Install. and Config.

• Cisco 7513/7576 Rack-Mount Kit Installation Instructions

• 1200W AC-Input Power Supply Replacement Instructions

• Upgrading the AC-Input Power Supplies in the Cisco 7513

• 1200W DC-Input Power Supply Replacement Instructions

• Cisco 7513/7576 Cable Mgmt Bracket Installation Instructions

• Cisco 7513/7576 Blower Module Replacement Instructions

• Replacing the Chassis Interface in Cisco 7500 Series Routers

• Replacing the Dual or Turbo Arbiter

• Cisco 7513, Cisco 7513-MX, and Cisco 7576 Card Cage and Backplane Assembly Replacement Instructions

• Cisco 7513/7576 Chassis Replacement and Upgrade Instructions

• Replacing the Front Panel Bezels on Cisco 7500 Series Routers

• RMA Return Instructions

• Installing Jackscrews on the EIP Ethernet Connectors

• PA-A3 OC-12 ATM Port Adapter Installation and Configuration

• IMA Port Adapter Installation and Configuration

• Route Switch Processor (RSP8) Installation and Configuration

• PA-2CE1 Channelized E1 Port Adapter

• Two-Port T1/E1 Digital Voice Port Adapters

• PA-MC-2T3+ Multi-Channel Port Adapter

• PA-F-MM and PA-F-SM Half-Duplex FDDI

• OC12 Dynamic Packet Transport Interface Processor

• Enhanced Gigabit Ethernet Interface Processor Install and Config