INDEX

Numerics

INDEX

Numerics

2-minute blower failure shutdown

: See blower shutdown

2-minute fan failure shutdown

: See fan, shutdown

A

AC-input

power supply

: installation, Cisco 7505 5-19 to 5-22
: installation, Cisco 7507 3-21 to 3-27
: installation, Cisco 7513 3-38 to 3-45
: installation, Cisco 7576 3-38 to 3-45
: LEDs A-37 to A-42
: removal, Cisco 7507 6-4 to 6-8
: removal, Cisco 7513 7-4 to 7-7
: removal, Cisco 7576 7-4 to 7-7

specifications

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-19
: Cisco 7576 1-27

acronyms, definition 1-2

agency approvals

: Cisco 7505 1-9
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-28

airflow

clearance

: for circulation around Cisco 7505 2-25
: for circulation around Cisco 7507 2-28
: for circulation around Cisco 7513 2-31
: for circulation around Cisco 7576 2-31

considerations

: Cisco 7505 2-18
: Cisco 7507 2-19
: Cisco 7513 2-20
: Cisco 7576 2-20

filter cleaning 6-15

specifications

: Cisco 7505 1-8
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-28

altitude specifications, system 2-18

AppleTalk, configuring 4-22

arbiter 1-51

arbitration, CyBus 1-51

AUSTEL agency approvals, Cisco 7505 1-9

Autoinstall configuration, basic 4-17

auxiliary port

: connecting devices to 3-47
: description 1-42
: pinout 1-44

B

b (boot) command 4-8

backplane

bandwidth

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-18
: Cisco 7576 1-27

cover removal

: Cisco 7505 5-12
: Cisco 7513 7-20
: Cisco 7576 7-20

description, Cisco 7505 1-7

power distribution 5-2, A-7, A-21

wiring 5-2, 6-3, 7-3

backup batteries 1-41

banner, system 4-3, A-10, A-24

batteries, lithium backup for NVRAM 1-41

blower

assembly

: description 1-55
: replacement in the Cisco 7507 6-23

failure 2-45, 2-52, 2-56, A-22

module

: description 1-55, 7-16
: operating voltages A-21
: replacement in the Cisco 7513 7-16
: replacement in the Cisco 7576 7-16

shutdown 2-45, 2-52, 2-56

board racks, using 3-29

boot command 4-5

boot system command 4-6, 4-9

boot system flash command 4-41, 4-46

booting for the first time 4-12

bootload-failure response 4-10

bracket, cable-management

: Cisco 7505 3-13
: Cisco 7513 3-37
: Cisco 7576 3-37

Break key (interrupt) 4-9

broadcast address destination, configuration register settings 4-10

bus

: See CyBus

C

cable-management bracket

: Cisco 7505 3-13
: Cisco 7513 3-37
: Cisco 7576 3-37

cables

AC-input power

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-19
: Cisco 7576 1-27

attaching

: console and auxiliary 3-46 to 3-47
: power 3-44

auxiliary port 1-44

avoiding crossing 3-2

console port 1-43

DC-input power

: Cisco 7505 1-8
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-27

distance limitations 2-16

interference 2-14

power 5-19

: Cisco 7505 2-10
: Cisco 7507 2-11
: Cisco 7513 2-13
: Cisco 7576 2-13

power supply

: Cisco 7505 1-8
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-27

retention clip, power 5-19

safety guidelines 2-4

swapping power A-17, A-25

ungrounded and uninsulated 2-4

Y-types for RSP2 and RSP4 1-44

card cage assembly replacement, Cisco 7513 7-8

card cage assembly replacement, Cisco 7576 7-8

caution, description xxiii

CD-ROM, ordering documentation 4-52

chassis

airflow considerations

: Cisco 7505 2-18
: Cisco 7507 2-19
: Cisco 7513 2-20
: Cisco 7576 2-20

clearance

: Cisco 7505 2-25
: Cisco 7507 2-28
: Cisco 7513 2-31
: Cisco 7576 2-31

dimensions

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-18
: Cisco 7576 1-27

environment 2-16

feet, Cisco 7505 2-23

footprint 2-24, 2-30

internal components 5-2, 6-3, 6-16, 7-3

lifting safely 2-5, 2-6

panels, removing 6-9

slot arrangement

: Cisco 7505 1-5
: Cisco 7507 1-9
: Cisco 7513 1-14
: Cisco 7576 1-20

specifications

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-18
: Cisco 7576 1-27

temperature thresholds 2-34 to 2-37

voltage thresholds 2-35 to 2-37

weight

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-18
: Cisco 7576 1-27

chassis interface

description 1-52

replacement

: Cisco 7505 5-16
: Cisco 7507 6-18
: Cisco 7513 7-22
: Cisco 7576 7-22

: See chassis interface

Cisco 7505

additional information, obtaining 4-51

arbiter 1-51

cable connections, RSP 3-45 to 3-47

chassis airflow 2-18

chassis interface

: description 1-52
: replacement 5-16

common RSP features 1-39

configuration procedures, basic 4-1 to 4-32

fan tray

: description 1-53
: replacement procedures 5-6

Flash memory, using 4-32 to 4-51

installation

: preparation 2-1 to 2-42
: procedures 3-6 to 3-15

interface processor description 1-57

maintenance procedures 5-1 to 5-22

overview 1-5 to 1-9

power supply

: connection 3-14
: descriptions 1-47
: guidelines 2-10
: LEDs A-37
: removal 5-19
: replacement 5-20

rack-mounting

: guidelines 2-22, 2-26
: procedure 3-10

removing

: backplane cover 5-12
: chassis interface 5-16
: cover panels 5-4
: fan tray 5-6
: power harness cover 5-10
: power supply 5-19

replacing

: backplane cover 5-15
: chassis interface 5-18
: cover panel 5-5
: fan tray 5-9
: power harness cover 5-12
: power supply 5-20

RSP1

: description 1-29 to 1-31
: DRAM, upgrading B-1 to B-7
: LEDs A-34

RSP4

: description 1-35 to 1-38
: DRAM, upgrading B-14 to B-21
: LEDs A-36

safety recommendations 2-3

site environment guidelines 2-16 to 2-42

system software

: description 1-59
: requirements 1-9

troubleshooting

: cooling subsystem A-12
: guidelines A-5
: power subsystem A-11
: processor subsystems A-29 to A-31
: startup problems A-7 to A-10

wiring guidelines 2-14

Cisco 7507

additional information, obtaining 4-51

arbiter 1-51

blower

: description 1-55
: replacement 6-23

cable connections, RSP 3-45 to 3-47

chassis airflow 2-19

chassis interface

: description 1-52
: replacement 6-18

common RSP features 1-39

configuration procedures, basic 4-1 to 4-32

Flash memory, using 4-32 to 4-51

installation

: preparation 2-1 to 2-46
: procedures 3-16 to 3-27

interface processor description 1-57

maintenance procedures 6-1 to 6-28

overview 1-9 to 1-14

power supply

: connection 3-24
: descriptions 1-47
: guidelines 2-11
: installation 3-21
: LEDs A-38

removing

: air filter 6-15
: blower 6-23
: chassis interface 6-18
: cover panels 6-9
: LED board 6-20
: power supplies 6-3

replacing

: air filter 6-16
: blower 6-26
: chassis interface 6-19
: cover panels 6-12
: LED board 6-21

RSP2

: description 1-32 to 1-34
: DRAM, upgrading B-7 to B-14
: LEDs A-35

RSP4

: description 1-35 to 1-38
: DRAM, upgrading B-14 to B-21
: LEDs A-36

safety recommendations 2-3

site environment guidelines 2-16 to 2-46

system software

: description 1-59
: requirements 1-14

troubleshooting

: cooling subsystem A-18
: guidelines A-13
: power subsystem A-16
: processor subsystems A-29 to A-31
: startup problems A-15 to A-16
: using LEDs A-32

wiring guidelines 2-14

Cisco 7513

additional information, obtaining 4-51

arbiter 1-51

blower

: description 1-55
: replacement 7-16

cable connections, RSP 3-45 to 3-47

chassis airflow 2-20

chassis interface

: description 1-52
: replacement 7-22

common RSP features 1-39

configuration procedures, basic 4-1 to 4-32

EEPROM exchange, backplane 7-11

Flash memory, using 4-32 to 4-51

installation

: preparation 2-1 to 2-53
: procedures 3-28 to 3-45

interface processor description 1-57

maintenance procedures 7-1 to 7-28

overview 1-14 to 1-19

power supply

: connection 3-41
: descriptions 1-47
: guidelines 2-12
: installation 3-38
: LEDs A-40

rack-mounting guidelines 2-29

removing

: backplane maintenance cover 7-20
: blower 7-16
: card cage 7-8
: chassis interface 7-22
: cover panels 7-17
: power supplies 7-4

replacing

: backplane maintenance cover 7-21
: blower 7-16
: card cage 7-14
: chassis interface 7-27
: cover panels 7-19

RSP2

: description 1-32 to 1-34
: DRAM, upgrading B-7 to B-14
: LEDs A-35

RSP4

: description 1-35 to 1-38
: DRAM, upgrading B-14 to B-21
: LEDs A-36

safety recommendations 2-3

site environment guidelines 2-16 to 2-53

system software

: description 1-59
: requirements 1-19

troubleshooting

: cooling subsystem A-25
: guidelines A-19
: power subsystem A-24
: processor subsystems A-29 to A-31
: startup problems A-21 to A-24
: using LEDs A-33

wiring guidelines 2-14

Cisco 7576

additional information, obtaining 4-51

arbiter 1-51

blower

: description 1-55
: replacement 7-16

cable connections, RSP 3-45 to 3-47

chassis airflow 2-20

chassis interface

: description 1-52
: replacement 7-22

common RSP features 1-39

configuration procedures, basic 4-1 to 4-32

EEPROM exchange, backplane 7-11

Flash memory, using 4-32 to 4-51

installation

: preparation 2-1 to 2-53
: procedures 3-28 to 3-45

interface processor description 1-57

maintenance procedures 7-1 to 7-28

overview 1-20 to 1-28

power supply

: connection 3-41
: descriptions 1-47
: guidelines 2-12
: installation 3-38
: LEDs A-40

rack-mounting guidelines 2-29

removing

: backplane maintenance cover 7-20
: blower 7-16
: card cage 7-8
: chassis interface 7-22
: cover panels 7-17
: power supplies 7-4

replacing

: backplane maintenance cover 7-21
: blower 7-16
: card cage 7-14
: chassis interface 7-27
: cover panels 7-19

RSP2

: description 1-32 to 1-34
: DRAM, upgrading B-7 to B-14
: LEDs A-35

RSP4

: description 1-35 to 1-38
: DRAM, upgrading B-14 to B-21
: LEDs A-36

safety recommendations 2-3

site environment guidelines 2-16 to 2-53

system software

: description 1-59
: requirements 1-28

troubleshooting

: cooling subsystem A-25
: guidelines A-19
: power subsystem A-24
: processor subsystems A-29 to A-31
: startup problems A-21 to A-24
: using LEDs A-33

wiring guidelines 2-14

Cisco Extended Bus

: See CyBus

cleaning the air filter 6-15

clock generation, arbiter (CyBus) 1-51

commands

: b (boot) 4-8
: boot 4-5
: boot system 4-6, 4-9
: boot system flash 4-42, 4-46
: boot system flash filename 4-41
: Break (interrupt) 4-9
: config terminal 4-30
: config-register 4-8, 4-11, 4-16, 4-42
: configure 4-29
: configure terminal 4-8, 4-11, 4-16
: confreg 4-15
: copy 4-44, 4-47
: copy running-config startup-config 4-18, 4-31
: copy tftp flash 4-43
: enable 4-11, 4-16, 4-29
: enable password 4-13
: enable secret password 4-13
: EXEC 4-12
: Flash-related 4-8
: format 4-39, 4-51
: i (initialize) 4-14
: o/r (reset) 4-14
: reload 4-11
: setup 4-19
: show config 4-31
: show configuration 4-14
: show environment 2-37
: show environment all 2-41
: show environment last 2-39, 2-43, 2-47, 2-53
: show environment table 2-40, 2-43, 2-47, 2-54
: show running-config 4-30
: show startup-config 4-31
: show version 4-11, 4-14
: squeeze 4-43
: write memory 4-18, 4-31
: write terminal 4-30

config terminal command 4-30

config-register command 4-8, 4-11, 4-16, 4-42

configuration

file, saving 4-28, 4-31

interfaces 4-25 to 4-29

modifications 4-31

notes 5-1, 6-1, 7-1

: bit meanings 4-8 to 4-10
: boot field 4-8
: boot filename 4-9
: broadcast address settings 4-10
: changing settings 4-11
: configuration 4-5 to 4-10
: transmission rate settings 4-10

sample 4-22 to 4-24, 4-27 to 4-28

configure command 4-29

configure terminal command 4-8, 4-11, 4-16

configuring

AppleTalk 4-22

global parameters 4-19

: procedure 4-22
: sample configuration 4-24

interface parameters

: examples of 4-25, 4-26
: sample configuration 4-27 to 4-28

IPX 4-22

the Cisco 7500 series routers 4-17 to 4-31

using AutoInstall 4-17

using configuration mode 4-29 to 4-30

using setup command facility 4-18

confreg command 4-15

connecting

auxiliary port 3-47

console port 3-46

DC-input power

: Cisco 7505 3-14
: Cisco 7507 3-24
: Cisco 7513 3-41
: Cisco 7576 3-41

console port

: connecting devices to 3-46
: description 1-42
: pinout 1-43
: settings 4-10
: terminal A-10, A-24

conventions

: See document conventions

cooling subsystem A-4, A-27

copy command 4-44

copy command (Flash memory) 4-47

copy running-config startup-config 4-18

copy running-config startup-config command 4-31

copy tftp flash command 4-43

CPU

halt LED on RSP1 A-9, A-34

halt LED on RSP2 A-23, A-35

halt LED on RSP4 A-23, A-36

system

: RSP1 1-30
: RSP2 1-33
: RSP4 1-36

critical status level, environmental monitor

: Cisco 7505 2-35
: Cisco 7507 2-36
: Cisco 7513 2-37
: Cisco 7576 2-37

CSA agency approvals

: Cisco 7505 1-9
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-28

current rating, AC and DC 1-19, 1-27

customer service, accessing 4-52

CxBus description 1-2

CyBus

: arbiter clock generation 1-51
: arbitration 1-51
: Cisco 7505 1-7
: Cisco 7507 1-12
: Cisco 7513 1-17
: clock 1-51
: description 1-2, 1-8
: global lock 1-51
: traffic 1-51
: See also backplane

D

damage from overheating 2-32

data transmission-rate settings 4-10

dBus description 1-2

DC fail LED on power supply

: See LEDs

DC OK LED A-7, A-21, A-37

DC-input

power connection

: Cisco 7505 3-14
: Cisco 750t 3-24
: Cisco 7513 3-41
: Cisco 7576 3-41

power supply

: installation, Cisco 7505 5-19 to 5-22
: installation, Cisco 7507 3-21 to 3-27
: installation, Cisco 7513 3-38 to 3-45
: installation, Cisco 7576 3-38 to 3-45
: LEDs A-37 to A-42

specifications 1-19, 1-27

dimensions

chassis

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco7513 1-18
: Cisco7576 1-27

interface processors 1-57

displays, environmental 2-37 to 2-52

distance limitations, cable transmission 2-16

document conventions xxii

Documentation CD-ROM, ordering 4-52

DRAM

locations

: RSP1 B-2
: RSP2 B-8
: RSP4 B-15

RSP1 configurations B-3

RSP2 configurations B-9

RSP4 configurations B-16

upgrade procedures B-1 to B-21

dual arbiter 1-51

dual CyBus

: Cisco 7505 1-7
: Cisco 7507 1-12
: Cisco 7513 1-17
: Cisco 7576 1-23
: description 1-2
: See also CyBus

E

EEPROM description 1-41

electromagnetic pulse

: See EMP

electronically erasable programmable read-only memory

: See EEPROM

electrostatic discharge precautions 2-8

EMI

agency approvals 1-19, 1-28

: Cisco 7505 1-9
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-28

prevention 2-15

EMP, avoiding the effects of 2-15

enable command 4-16, 4-29

enable password command 4-13

enable secret password command 4-13

environment, site 2-16

environmental

displays 2-37 to 2-52

monitor descriptions 2-37 to 2-53

status

: Cisco 7505 2-39 to 2-42
: Cisco 7507 2-42 to 2-46
: Cisco 7513 2-46 to 2-53, 2-53 to 2-56
: Cisco 7576 2-46 to 2-53, 2-53 to 2-56

environmental monitor description 2-32

environmental, reports 2-37 to 2-52

ESD

: See electrostatic discharge precautions

examples

blower failure shutdown messages 2-45, 2-52, 2-56

configuration

: Flash memory 4-32 to 4-51
: interface 4-25 to 4-29
: software configuration register 4-5 to 4-10
: system 4-17 to 4-31

configuring global parameters 4-22

copying

: images between Flash memory cards 4-46
: images to a Flash memory card 4-44

Ethernet and serial interface configuration 4-27, 4-28

fan failure shutdown messages 2-42

formatting a Flash memory card 4-38

setup command facility 4-24

show environment all command 2-41, 2-43, 2-49, 2-54

show environment command 2-39, 2-42, 2-46, 2-53

show environment last command 2-39, 2-42, 2-46, 2-53

show environment table command 2-40, 2-43, 2-47, 2-54

squeeze command 4-43

system banner A-10, A-24

EXEC

: command interpreter 4-12
: privileged mode 4-12

F

failure

: AC or DC source 2-33, A-7, A-21, A-38
: AC source A-41
: blower A-22
: fans A-8
: power supply, DC section A-38, A-41

fan

control board 5-3

failure 2-42, A-8

shutdown 2-41

tray

: description 5-3
: operating voltages A-7
: replacing 5-6

fan OK LED A-41

FCC agency approvals

: Cisco 7505 1-9
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-28

field-replaceable unit

: See FRU

filenames, for booting over the network 4-9

filter, cleaning, air 6-15

Flash memory

: additional commands 4-42
: card installation and removal 4-33 to 4-37
: copy command 4-47
: copying between cards 4-46
: copying bootable images between 4-46
: copying files 4-44
: copying files to RSP memory 4-47 to 4-51
: description 1-41
: formatting a new PCMCIA card 4-38
: location on RP (illustration) 1-31
: PCMCIA card replacement 4-33
: using 4-32 to 4-51

format command 4-39, 4-51

formatting a new PCMCIA card 4-38

frequency specifications, line

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-19
: Cisco 7576 1-27

front cover panel 7-17

FRUs definition 1-3

G

global parameters, configuring 4-19

gravity, maintaining low center

: Cisco 7505 2-25
: Cisco 7507 2-28
: Cisco 7513 2-31
: Cisco 7576 2-31

H

Hall Effect signal 2-42

humidity specifications

: Cisco 7505 1-9
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-28
: system 2-18

I

i command (initialize and reboot) 4-14

IGRP

: See Interior Gateway Routing Protocol

immunity, agency approvals for interference

: Cisco 7505 1-9
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-28

information, obtaining additional 4-51 to ??

inlet air 2-41, 2-49

installation

cable-management bracket

: Cisco 7505 3-13
: Cisco 7513 3-37
: Cisco 7576 3-37

Cisco 7513 blower module 7-16

Cisco 7513 card cage assembly 7-8

Cisco 7576 blower module 7-16

Cisco 7576 card cage assembly 7-8

general 3-9, 3-33

guidelines

: Cisco 7505 3-6 to 3-8
: Cisco 7507 3-16 to 3-19
: Cisco 7513 3-28 to 3-32
: Cisco 7576 3-28 to 3-32

power supply

: Cisco 7505 5-19 to 5-22
: Cisco 7507 3-21 to 3-27, 6-4 to 6-8
: Cisco 7513 3-38 to 3-45, 7-4 to 7-7
: Cisco 7576 3-38 to 3-45, 7-4 to 7-7

rack-mounting, Cisco 7505 3-10 to 3-12

troubleshooting A-1

installing

backplane cover, Cisco 7505 5-12

backplane maintenance cover, Cisco 7513 7-20

backplane maintenance cover, Cisco 7576 7-20

blower

: Cisco 7507 6-23
: Cisco 7513 7-16
: Cisco 7576 7-16

card cage, Cisco 7513 7-14

card cage, Cisco 7576 7-14

chassis interface

: Cisco 7505 5-16
: Cisco 7507 6-18
: Cisco 7513 7-22
: Cisco 7576 7-22

Cisco 7505 3-6 to 3-15

Cisco 7507 3-16 to 3-27

Cisco 7513 3-28 to 3-45

Cisco 7576 3-28 to 3-45

cover panels, Cisco 7513 7-17

cover panels, Cisco 7576 7-17

fan tray, Cisco 7505 5-6

LED board 6-21

PCMCIA card 4-33

power harness cover, Cisco 7505 5-10

power supply

: Cisco 7505 5-20
: Cisco 7507 3-21
: Cisco 7513 3-38
: Cisco 7576 3-38

interface

configuration 4-25 to 4-29

parameters 4-25

processors

: additional documentation 1-57
: description 1-57
: dimensions 1-57
: LEDs 1-57, A-30
: overview 1-57 to 1-59
: removing and installing in Cisco 7505 3-8
: removing and installing in Cisco 7507 3-19
: removing and installing in Cisco 7513 3-32
: removing and installing in Cisco 7576 3-32
: troubleshooting A-30
: types 1-58

types supported 1-1

Interior Gateway Routing Protocol, configuring 4-23

interior routing protocol, setting 4-23

intermittent power failures, checking for

: Cisco 7505 2-39
: Cisco 7507 2-43
: Cisco 7513 2-49, 2-54
: Cisco 7576 2-49, 2-54

Internet Package Exchange, configuring 4-22

interrupting system with Break key 4-9

IP, setting routing protocols for 4-23

IPX

: See Internet Package Exchange

L

label, chassis serial number A-3

LED board, replacing 6-20

LEDs

AC OK A-40

CPU Halt A-34, A-35

DC Fail A-38

DC OK 4-2, A-7, A-21, A-37, A-40

enabled on interface processors 4-3

fan OK A-41

front panel A-33

interface processor 1-57, A-30

normal on front panel A-33

normal on power supply A-32

on all RSPs 1-39

output fail A-40

PCMCIA slots 1 and 2 A-34, A-35, A-36

power A and power B A-33

power supply

: Cisco 7505 A-37
: Cisco 7507 A-38
: Cisco 7513 A-40
: Cisco 7576 A-40

RSP1 A-9

RSP2 A-16, A-23

RSP4 A-29

system

: Cisco 7507 A-32
: Cisco 7513 A-33
: Cisco 7576 A-33

troubleshooting with A-31 to A-42

lightning storm, safety during 2-4

locked blocks, recovering from 4-51

M

memory

components

: RSP1 1-31
: RSP2 1-34
: RSP4 1-38

DRAM

: description 1-40
: replacement procedures B-1 to B-21

Flash

: See Flash memory

NVRAM

: description 1-41

RSP1 DRAM configurations B-3

RSP2 DRAM configurations B-9

RSP4 DRAM configurations B-16

SRAM configurations 1-40

messages

: blower shutdown 2-45, 2-52, 2-56
: environmental 2-37 to 2-52
: fan shutdown 2-42

microcode, downloadable 1-57

N

nonvolatile random-access memory

: See NVRAM

normal LED

: front panel A-33
: RSP1 A-9, A-34
: RSP2 A-23, A-35
: RSP4 A-23, A-36

normal status level, environmental monitor

: Cisco 7505 2-35
: Cisco 7507 2-36, 2-42
: Cisco 7513 2-37, 2-46, 2-53
: Cisco 7576 2-37, 2-46, 2-53

note, description xxiii

NVRAM

: backup batteries 1-41
: description 1-41
: log 2-33
: RSP1 1-31
: RSP2 1-34
: RSP4 1-38
: saving settings 4-31
: using with Flash memory 4-48, 4-50

O

: o/r command (reset) 4-14
: operating conditions for chassis 2-16
: operating temperature 1-14
: out-of-tolerance condition 2-33, A-38, A-41
: overtemperature conditions A-1

P

passwords

: enabling 4-13
: recovering 4-13 to 4-16

PCMCIA

definition 1-3

formatting a new card 4-38

slots

: RSP1 1-31
: RSP2 1-34
: RSP4 1-38

Personal Computer Memory Card International Association

: See PCMCIA

PFC

: all AC-input power supplies 2-9
: Cisco 7505 power supply 2-10
: Cisco 7507 power supply 2-11
: Cisco 7513 power supply 2-12
: Cisco 7576 power supply 2-12

pinouts

: auxiliary and console ports 1-43
: Y cables 1-45

port

auxiliary

: description 1-42
: pinout 1-44

console

: description 1-42
: pinout 1-43

power

backplane harness 5-3

cable

: Cisco 7507 2-11
: Cisco 7513 2-13
: Cisco 7576 2-13
: requirements 5-3
: safety recommendations 2-3

Cisco 7505 2-10

Cisco 7507 2-11

Cisco 7513 2-12

Cisco 7576 2-12

cord A-17, A-25

DC-output status

: Cisco 7505 2-35
: Cisco 7507 2-36
: Cisco 7513 2-37
: Cisco 7576 2-37

disabled 2-33

distribution 5-3

emergency switch 2-3

factor corrector

: See PFC

failures 2-35, 2-43, 2-49, 2-54

harness cover 5-3

internal DC voltage A-7, A-21

LED A-7, A-21

loss A-38, A-41

normal startup sequence A-15

service 3-2

site guidelines 2-9

specifications 1-8, 1-13, 1-19, 1-27

status A-7, A-21

subsystem for troubleshooting A-4

surge suppression 2-15

troubleshooting

: Cisco 7505 A-11
: Cisco 7507 A-16
: Cisco 7513 A-24
: Cisco 7576 A-24

ungrounded 2-4

power factor corrector 1-13

power supply

active A-38

bays

: Cisco 7507 1-9
: Cisco 7513 1-14
: Cisco 7576 1-20

cables

: Cisco 7505 1-8
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-27

Cisco 7505 spares

: PWR/5AC=, AC-input power supply for North America 1-47
: PWR/5-ACA=, AC-input power supply for Australia 1-50
: PWR/5-ACE=, AC-input power supply for Europe 1-50
: PWR/5-ACI=, AC-input power supply for Italy 1-50
: PWR/5-ACU=, AC-input power supply for the U. K. 1-50
: PWR/5DC=, DC-input power supply for North America 1-47
: PWR/5-DCA=, DC-input power supply for Australia 1-50
: PWR/5-DCE=, DC-input power supply for Europe 1-50
: PWR/5-DCI=, DC-input power supply for Italy 1-50
: PWR/5-DCU=, DC-input power supply for the U. K. 1-50

Cisco 7507 spares

: PWR/7-AC=, AC-input power supply for North America 1-47
: PWR/7-ACA=, AC-input power supply for Australia 1-50
: PWR/7-ACE=, AC-input power supply for Europe 1-50
: PWR/7-ACI=, AC-input power supply for Italy 1-50
: PWR/7-ACU=, AC-input power supply for the U. K. 1-50
: PWR/7-DC=, DC-input power supply for North America 1-47
: PWR/7-DCA=, DC-input power supply for Australia 1-50
: PWR/7-DCE=, DC-input power supply for Europe 1-50
: PWR/7-DCI=, DC-input power supply for Italy 1-50
: PWR/7-DCU=, DC-input power supply for the U. K. 1-50

Cisco 7513 spares

: PWR-7513-AC=, AC-input power supply for North America 1-47
: PWR-7513-ACA=, AC-input power supply for Australia 1-50
: PWR-7513-ACE=, AC-input power supply for Europe 1-50
: PWR-7513-ACI=, AC-input power supply for Italy 1-50
: PWR-7513-ACU=, AC-input power supply for the U. K. 1-50
: PWR-7513-DC=, DC-input power supply for North America 1-47
: PWR-7513-DCA=, DC-input power supply for Australia 1-50
: PWR-7513-DCE=, DC-input power supply for Europe 1-50
: PWR-7513-DCI=, DC-input power supply for Italy 1-50

Cisco 7576 spares

: PWR-7576-ACA=, AC-input power supply for Australia 1-50
: PWR-7576-ACE=, AC-input power supply for Europe 1-50
: PWR-7576-ACI=, AC-input power supply for Italy 1-50
: PWR-7576-ACU=, AC-input power supply for the U. K. 1-50
: PWR-7576-DC=, DC-input power supply for North America 1-47
: PWR-7576-DCA=, DC-input power supply for Australia 1-50
: PWR-7576-DCE=, DC-input power supply for Europe 1-50
: PWR-7576-DCI=, DC-input power supply for Italy 1-50

DC-input

: Cisco 7505 connections 3-14
: Cisco 7507 connections 3-24
: Cisco 7513 connections 3-41
: Cisco 7576 connections 3-41

environmental monitor

: Cisco 7505 2-35
: Cisco 7507 2-36
: Cisco 7513 2-37
: Cisco 7576 2-37

handles 5-22

installation

: Cisco 7505 5-19 to 5-22
: Cisco 7507 3-21 to 3-27
: Cisco 7513 3-38 to 3-45
: Cisco 7576 3-38 to 3-45

LEDs

: Cisco 7505 A-37
: Cisco 7507 A-38
: Cisco 7513 A-40
: Cisco 7576 A-40

removal

: Cisco 7505 5-19 to 5-21
: Cisco 7507 6-4 to 6-8
: Cisco 7513 7-4 to 7-7
: Cisco 7576 7-4 to 7-7

safety interlock on Cisco 7507, Cisco 7513, and Cisco 7576 2-9, 2-10

shutdown 2-33, A-38, A-41, A-42

specifications

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-19
: Cisco 7576 1-27

status A-7, A-21

troubleshooting A-7, A-15, A-21

privileged mode 4-12

problem solving, system A-4

procedures

Autoinstall configuration 4-17

cable-management brackets, installing

: Cisco 7505 3-13
: Cisco 7513 3-37
: Cisco 7576 3-37

enabling passwords 4-13

Ethernet interface configuration 4-25 to 4-26

exchanging EEPROM devices 7-11 to 7-13

Flash memory

: card installation and removal 4-33 to 4-37
: copying files to 4-40
: copying files to RSP memory 4-47 to 4-51
: enabling booting from 4-41
: formatting cards 4-38 to 4-39
: making images bootable 4-41
: using 4-32 to 4-51

global parameters, configuring 4-19 to 4-24

installation 3-33, 3-34

: Cisco 7505 3-6 to 3-15
: Cisco 7507 3-16 to 3-27
: Cisco 7513 3-33 to 3-45
: Cisco 7576 3-33 to 3-45

installing

: Cisco 7505 cable-management bracket 3-13
: Cisco 7505 power supplies 5-19 to 5-22
: Cisco 7507 power supplies 3-21 to 3-27
: Cisco 7513 cable-management bracket 3-37
: Cisco 7513 power supplies 3-38 to 3-45
: Cisco 7576 cable-management bracket 3-37
: Cisco 7576 power supplies 3-38 to 3-45

interfaces, configuring 4-25 to 4-29

maintenance

: Cisco 7505 5-1 to 5-21
: Cisco 7507 6-1 to 6-28
: Cisco 7513 7-1 to 7-28
: Cisco 7576 7-1 to 7-28

rack-mounting, Cisco 7505 3-10 to 3-12

recovering from a lost password 4-13 to 4-16

removing

: backplane cover, Cisco 7505 5-12
: backplane cover, Cisco 7513 7-20
: backplane cover, Cisco 7576 7-20
: Cisco 7505 cover panel 5-4
: Cisco 7505 fan tray 5-6
: Cisco 7505 power supply 5-19 to 5-22
: Cisco 7507 power supplies 6-4 to 6-8
: Cisco 7513 card cage 7-8 to 7-10
: Cisco 7513 power supplies 7-4 to 7-7
: Cisco 7576 card cage 7-8 to 7-10
: Cisco 7576 power supplies 7-4 to 7-7
: cover panels 7-17
: power harness cover 5-10
: power supply 7-4

replacing

: Cisco 7505 cover panel 5-4
: Cisco 7505 fan tray 5-6
: Cisco 7505 power supply 5-20
: Cisco 7507 blower 6-23
: Cisco 7513 blower 7-16
: Cisco 7513 card cage assembly 7-8 to 7-15
: Cisco 7576 blower 7-16
: Cisco 7576 card cage assembly 7-8 to 7-15
: cover panels 7-17
: power harness cover 5-10

replacing processor modules

: Cisco 7505 3-8
: Cisco 7507 3-19
: Cisco 7513 3-32
: Cisco 7576 3-32

router configuration, basic 4-1 to 4-31

synchronous serial interface configuration 4-26 to 4-29

system configuration, basic 4-17 to 4-31

system startup 4-2 to 4-4

upgrading DRAM B-1 to B-21

using Autoinstall 4-17

using configuration mode 4-29 to 4-30

using setup command facility 4-18

processor

modules

: black cardboard board rack, Cisco 7513 3-29
: black cardboard board rack, Cisco 7576 3-29
: removal and replacement in Cisco 7505 3-8
: removal and replacement in Cisco 7507 3-19
: removal and replacement in Cisco 7513 3-32
: removal and replacement in Cisco 7576 3-32

shutdown 2-33

system

: RSP1 1-30
: RSP2 1-32
: RSP4 1-36

protocols 1-1

publications, additional configuration 4-52 to 4-53

R

rack

: recommendations, Cisco 7505 2-22
: recommendations, Cisco 7507 2-26
: recommendations, Cisco 7513 2-29
: recommendations, Cisco 7576 2-29
: ventilation 2-22

rack-mounting procedure, Cisco 7505 3-10 to 3-12

radio frequency interference

: See RFI

recovering a lost password 4-13

refresh, environmental display 2-41

reload command 4-11

replaceable system components 5-1, 6-1, 7-1

reports, environmental 2-37

reset switch A-36

RFI, preventing effects of 2-15

RIP

: See Routing Information Protocol

Route Switch Processor

: See RSP1, RSP2, or RSP4

Routing Information Protocol, configuring 4-23

RSP1

console and auxiliary port connections 3-45

description 1-29 to 1-31

DRAM

: location B-2
: SIMM configurations B-3
: upgrade procedure B-1 to B-5

Flash memory card replacement 4-33

LEDs A-9

memory components 1-31

normal startup A-9

operating voltages A-7

system CPU 1-30

troubleshooting A-29

RSP2

console and auxiliary port connections 3-45

description 1-32 to 1-34

DRAM

: location B-8
: SIMM configurations B-9
: upgrade procedure B-7 to B-14

Flash memory card replacement 4-33

LEDs A-16, A-23

memory components 1-34

normal startup A-16, A-23

operating voltages A-21

system CPU 1-33

troubleshooting A-29

Y cables 1-44

RSP4

3.3V DIMM device caution B-15, B-16

console and auxiliary port connections 3-45

description 1-35 to 1-38

DRAM

: location B-15
: SIMM configurations B-16
: upgrade procedure B-14 to B-21

Flash memory card replacement 4-33

LEDs A-23, A-29

memory components 1-38

system CPU 1-36

troubleshooting A-29

Y cables 1-44

S

safety

agency approvals

: Cisco 7505 1-9
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-28

cable recommendations 2-3

ESD 2-9

general guidelines 2-3

lifting the chassis 2-5, 2-6

recommendations 2-3, 2-4

warning definition xxiii

sample configuration 4-21 to 4-24, 4-27 to 4-28

saving the configuration file 4-28, 4-31

screwdriver 3-37

secret passwords, enabling 4-13

sensors, temperature 2-41, 2-43, 2-49, 2-54

setup command 4-19

setup command facility

example 4-24

script

: banner information (example) 4-20
: interface summary (example) 4-21
: System Configuration Dialog (example) 4-21

setup command facility, using 4-18

show config command 4-31

show configuration command 4-14

show environment command 2-37, 2-41

show environment last command 2-39, 2-42, 2-43, 2-46, 2-47, 2-53

show environment table command 2-40, 2-43, 2-47, 2-54

show running-config command 4-30

show startup-config command 4-31

show version command 4-14

shutdown

: blower failure 2-45, 2-52, 2-56
: environmental 2-32, A-12, A-26, A-28
: fan failure 2-41
: power supply 2-33, A-38, A-41
: processor 2-33
: thresholds 2-32

SIMM B-8

Simple Network Management Protocol, configuring 4-22

site

: cabling guidelines 2-14
: environmental guidelines 2-16 to 2-21
: power 2-9

SNMP

: See Simple Network Management Protocol

SNMP management 1-30

software

configuration register functions 4-5 to 4-10

minimum system requirements

: Cisco 7505 1-9
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-28

spare parts

Cisco 7505

: chassis interface 5-16
: fan tray 5-6
: power supply 5-19

Cisco 7507

: air filter 6-15
: blower assembly 6-23
: LED board 6-20
: power supplies 6-3

Cisco 7513

: blower module 7-16
: card cage assembly 7-8
: chassis interface 7-22
: power supplies 7-4

Cisco 7576

: blower module 7-16
: card cage assembly 7-8
: chassis interface 7-22
: power supplies 7-4

spares definition 1-3

spares

Cisco 7505

: CISCO7505/4=, chassis with an RSP4 1-37
: DRAM, RSP1 B-3
: MAS/5-FAN=, fan tray 1-54
: MAS-7500CI, chassis interface 1-53
: PWR/5AC=, AC-input power supply for North America 1-47
: PWR/5-ACA=, AC-input power supply for Australia 1-50
: PWR/5-ACE=, AC-input power supply for Europe 1-50
: PWR/5-ACI=, AC-input power supply for Italy 1-50
: PWR/5-ACU=, AC-input power supply for the U. K. 1-50
: PWR/5DC=, DC-input power supply for North America 1-47
: PWR/5-DCA=, DC-input power supply for Australia 1-50
: PWR/5-DCE=, DC-input power supply for Europe 1-50
: PWR/5-DCI=, DC-input power supply for Italy 1-50
: PWR/5-DCU=, DC-input power supply for the U. K. 1-50
: RSP1=, Route Switch Processor 1-30
: RSP4=, Route Switch Processor 1-37

Cisco 7507

: ACS-7000RMK=, rack mount kit 3-1
: CAB-RSP2AUX=, auxiliary Y cable 1-45
: CAB-RSP2CON=, console Y cable 1-45
: CISCO7507/4=, chassis with an RSP4 1-37
: CISCO7507/4x2=, chassis with two RSP4s 1-37
: DRAM, RSP2 B-9
: DRAM, RSP4 B-16
: MAS-7500CI, chassis interface 1-53
: MAS-7KFAN=, blower assembly 1-55
: PWR/7-AC=, AC-input power supply for North America 1-47
: PWR/7-ACA=, AC-input power supply for Australia 1-50
: PWR/7-ACE=, AC-input power supply for Europe 1-50
: PWR/7-ACI=, AC-input power supply for Italy 1-50
: PWR/7-ACU=, AC-input power supply for the U. K. 1-50
: PWR/7-DC=, DC-input power supply for North America 1-47
: PWR/7-DCA=, DC-input power supply for Australia 1-50
: PWR/7-DCE=, DC-input power supply for Europe 1-50
: PWR/7-DCI=, DC-input power supply for Italy 1-50
: PWR/7-DCU=, DC-input power supply for the U. K. 1-50
: RSP2=, Route Switch Processor 1-34
: RSP4=, Route Switch Processor 1-37

Cisco 7513

: ACS-7000RMK=, rack mount kit 3-1
: CAB-RSP2AUX=, auxiliary Y cable 1-45
: CAB-RSP2CON=, console Y cable 1-45
: CISCO7513/4=, chassis with an RSP4 1-37
: CISCO7513/4x2=, chassis with two RSP4s 1-37
: DRAM, RSP2 B-9
: DRAM, RSP4 B-16
: MAS-7500CI, chassis interface 1-53
: MAS-7513CDCAGE=, card cage assembly 1-18
: MAS-7513-FAN=, blower module assembly 1-56
: PWR-7513-AC=, AC-input power supply for North America 1-47
: PWR-7513-ACA=, AC-input power supply for Australia 1-50
: PWR-7513-ACE=, AC-input power supply for Europe 1-50
: PWR-7513-ACI=, AC-input power supply for Italy 1-50
: PWR-7513-ACU=, AC-input power supply for the U. K. 1-50
: PWR-7513-DC=, DC-input power supply for North America 1-47
: PWR-7513-DCA=, DC-input power supply for Australia 1-50
: PWR-7513-DCE=, DC-input power supply for Europe 1-50
: PWR-7513-DCI=, DC-input power supply for Italy 1-50
: RSP2=, Route Switch Processor 1-34
: RSP4=, Route Switch Processor 1-37

Cisco 7576

: ACS-7000RMK=, rack mount kit 3-1
: CAB-RSP2AUX=, auxiliary Y cable 1-45
: CAB-RSP2CON=, console Y cable 1-45
: CISCO7576=, chassis with two RSP4s 1-37
: DRAM, RSP2 B-9
: DRAM, RSP4 B-16
: MAS-7500CI, chassis interface 1-53
: MAS-7576-FAN=, blower module assembly 1-56
: PWR-7576-ACA=, AC-input power supply for Australia 1-50
: PWR-7576-ACE=, AC-input power supply for Europe 1-50
: PWR-7576-ACI=, AC-input power supply for Italy 1-50
: PWR-7576-ACU=, AC-input power supply for the U. K. 1-50
: PWR-7576-DC=, DC-input power supply for North America 1-47
: PWR-7576-DCA=, DC-input power supply for Australia 1-50
: PWR-7576-DCE=, DC-input power supply for Europe 1-50
: PWR-7576-DCI=, DC-input power supply for Italy 1-50
: RSP2=,Route Switch Processor 1-34
: RSP4=, Route Switch Processor 1-37

console and auxiliary Y cables 1-45

MAS-7KBLANK=, interface processor filler 3-30

MAS-RSPBLANK=, RSP filler 3-30

specifications

altitude 2-18

Cisco 7505 1-8

Cisco 7507 1-13

Cisco 7513 1-18

Cisco 7576 1-27

humidity 2-18

power supply

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-19
: Cisco 7576 1-27

RSP1 1-31

RSP2 1-34

RSP4 1-38

temperature

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-19
: Cisco 7576 1-27
: system 2-18

vibration 2-18

voltage

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-19
: Cisco 7576 1-27

weight

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-18
: Cisco 7576 1-27

squeeze command 4-43

startup, system 4-2, 4-2 to 4-4

statistics, environmental 2-40, 2-48

subsystems for troubleshooting

: cooling A-27

switch, emergency power 2-3

synchronous serial interfaces, configuring 4-26

system

backplane 1-7

banner 4-3, A-10, A-24

booting for the first time 4-12

configuration register

: configuration 4-5 to 4-10
: settings 4-4

configuration, basic 4-17 to 4-31

CPU

: RSP1 1-30
: RSP2 1-33
: RSP4 1-36

internal components 6-16

LEDs

: Cisco 7507 A-32
: Cisco 7513 A-33
: Cisco 7576 A-33

memory components

: RSP1 1-31
: RSP2 1-34
: RSP4 1-38

power A-7, A-21

problem solving A-4

problems at startup A-2

processor

: RSP1 1-30
: RSP2 1-32
: RSP4 1-36

replaceable components 5-1, 6-1, 7-1

shutdown A-7, A-21

specifications

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-18
: Cisco 7576 1-27

startup 4-2 to 4-4, A-7, A-21

troubleshooting A-1 to A-42

T

Telco-type equipment racks 2-22, 2-25, 2-26, 2-29

telephone jacks 2-4

temperature

internal chassis 2-32

operating 1-19, 1-28

parameters for environmental monitor 2-41, 2-49

sensors 2-41, 2-43, 2-49, 2-54

specifications

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-19
: Cisco 7576 1-27
: system 2-18

temperature and voltage thresholds

: Cisco 7505 2-35
: Cisco 7507 2-36
: Cisco 7513 2-37
: Cisco 7576 2-37
: descriptions 2-34 to 2-37

terminal block cover, removing and replacing

: Cisco 7505 3-15
: Cisco 7507 3-25
: Cisco 7513 3-43
: Cisco 7576 3-43

thresholds

: environmental 2-35, 2-36, 2-37
: shutdown 2-32

traffic on CyBus 1-51

troubleshooting

cooling subsystem A-27

installation A-1

power

: Cisco 7505 A-11
: Cisco 7507 A-16
: Cisco 7513 A-24
: Cisco 7576 A-24

strategy

: Cisco 7505 A-6
: Cisco 7507 A-14
: Cisco 7513 A-20
: Cisco 7576 A-20

using LEDs A-31 to A-42

using subsystems

: Cisco 7505 A-5 to A-13
: Cisco 7507 A-13 to A-19
: Cisco 7513 A-19 to A-27
: Cisco 7576 A-19 to A-27
: processors A-29 to A-31

U

UL agency approvals

: Cisco 7505 1-9
: Cisco 7507 1-14
: Cisco 7513 1-19
: Cisco 7576 1-28

upgrades

DRAM

: RSP1 B-1 to B-7
: RSP2 B-7 to B-13
: RSP4 B-14 to B-21

V

vacuuming, air filter 6-15

ventilation, rack 2-22

vibration specifications, system 2-18

voltage

out-of-tolerance condition, description of 2-33

specifications

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-19
: Cisco 7576 1-27

voltage and temperature thresholds

: Cisco 7505 2-35
: Cisco 7507 2-36
: Cisco 7513 2-37
: Cisco 7576 2-37
: descriptions 2-34 to 2-37

W

warning, description xxiii

warnings in environmental reports

: Cisco 7505 2-41
: Cisco 7507 2-43
: Cisco 7513 2-49
: Cisco 7576 2-49

weight

: Cisco 7505 1-8
: Cisco 7507 1-13
: Cisco 7513 1-18
: Cisco 7576 1-27

wiring

backplane 5-2, 6-3, 7-3

codes

: Cisco 7505 2-11
: Cisco 7507 2-11
: Cisco 7513 2-12
: Cisco 7576 2-12
: Cisco7507 2-11, 3-20
: Cisco7513 3-33
: Cisco7576 3-33

guidelines 2-14 to 2-16

interference 2-14

plant 2-14

telephone 2-4

Y

: Y cables, RSP2 and RSP4 1-44

Table of Contents

INDEX