Index

index

A

AC-input power supply

: description 1-48
: See also power supply

acronyms

: list of xiv

addresses

: MAC 1-55

airflow

: chassis clearance 1-61
: exhaust 1-61
: internal 2-5
: monitoring 1-61

AppleTalk

: configuring 4-9

ATM interfaces

: configuring 4-11

AutoInstall

: configuring 4-4

auxiliary port 3-23

: I/O controller 3-23

B

banner

: system 4-3

C

cable-management kit

: connecting 2-8

cables

: AC power 1-48
: connecting I/O controller 3-20
: connecting port adapter 3-20
: interference 2-10
: swapping power A-8

cautions

: captive installation screws 2-3
: changing passwords 4-21, 4-22
: chassis installation 3-12
: chassis overheating 1-62
: CPU reset button 1-39
: description of xi
: DRAM errors 1-21
: I/O controller removal while system operating 1-58
: installing blank port adapters 1-46
: installing power supply filler plates 1-8, 1-12, 1-49
: mixing power supplies 1-8, 1-12, 1-47
: network processing engine removal while system operating 1-58

chassis

: clearance 1-61
: footprint 2-7
: ground connection procedure 3-18
: ground receptacles 1-8, 1-12
: physical description 1-50
: rack-mounting> 3-2

clearance

: chassis 1-61

commands

: config-register 4-22
: config terminal 4-16
: configure 4-15
: configure memory 4-21
: configure terminal 4-21
: confreg 4-20
: copy running-config startup-config 4-5, 4-17, 4-22
: enable 4-16, 4-21
: enable password 4-22
: enable secret 4-22
: line con 0 4-22
: media-type 1-44
: no shutdown 4-22
: password 4-22
: reload 4-22
: reset 4-20
: setup 4-6
: show diag 1-43, 4-23
: show environment 1-61, 2-5, A-11
: show environment last 1-61
: show environment table 1-62, A-11
: show interfaces 1-55
: show running-config 4-17
: show startup-config 4-17, 4-19, 4-21
: show version 4-23

config-register command 4-22

config terminal command 4-16

configuration file

: saving 4-15, 4-17

configuration modes

: basic 4-16

configuration settings

: viewing 4-23

configure command 4-15

configure memory command 4-21

configure terminal command 4-21

configuring

AppleTalk 4-11, 4-12, 4-13

ATM interfaces 4-11

AutoInstall 4-4

basic router 4-4

examples 4-11, 4-14

Fast Ethernet 4-12

global parameters 4-6, 4-8

: sample configuration 4-10

I/O controller Fast Ethernet media type 1-44

IGRP 4-9

interface parameters

: sample configuration 4-14 to 4-15

interfaces 4-10

reviewing changes 4-17

setup command facility 4-6

synchronous serial 4-13

using configuration mode 4-16

confreg command 4-20

connection equipment

: auxiliary port signals 3-23
: console port signals 3-23

connector

: auxiliary port 3-23
: console port 3-23

console port

: See I/O controller

console terminal

: system banner display A-7

cooling subsystem

: description A-4
: troubleshooting A-11

copy running-config startup-config command 4-5, 4-17, 4-22

critical status level

: environmental monitor 1-60

crossover cable

: RJ-45 receptacle on I/O controller 3-28

D

DC-input power supply

: description 1-49
: See also power supply

DC power

: shutdown 1-60

displays

: environmental 1-61

distance limitations

: transmission 2-11

DRAM

: SIMM cautions and configurations 1-21

E

EEPROM

: MAC address bank 1-57

electromagnetic pulse

: See EMP

EMP

: avoiding 2-11

enable command 4-16, 4-21

enable password command 4-22

enable secret command 4-22

environmental monitoring and reporting

: description 1-59
: show commands 1-61 to 1-64

environmental specifications 2-9

equipment racks

: See racks

Ethernet

: interface configuration parameters 4-10

exhaust air 1-61

F

fan failures

: shutdown 1-64

Fast Ethernet

: configuring 4-12

Fast Ethernet port 3-24

: See also I/O controller

field-replaceable units

: See FRUs

filler panels

: port adapter 2-6
: power supply 2-6

Flash Disk

: options 1-52
: physical description 1-51

Flash memory card

: options 1-52
: physical description 1-51

FRUs

: list of 1-13

G

global parameters

: configuring 4-6
: sample configuration 4-10

ground connection

: procedure 3-18
: receptacles 1-8, 1-12

H

handles

: network processing engine 1-11
: network services engine 1-11
: NPE 1-7
: NSE 1-7
: port adapter 1-53
: power supply 1-47

hardware

: addresses 1-55

hardware addresses

: See also MAC addresses

humidity requirements 2-9

I

I/O controller

components 1-31, 1-37

connecting cables 3-20

LEDs A-5, A-6

MII receptacle 3-25

normal startup A-5

physical description 1-30

ports

: auxiliary 3-21
: console 3-21
: optional Fast Ethernet 3-24

replacement requirements 1-32

reset button 1-39

RJ-45 receptacle 3-27, 3-28

troubleshooting A-4, A-9

identifying startup problems A-4

IGRP

: configuring 4-9

installation

: brackets on the chassis 3-8
: chassis in a rack 3-2
: chassis on a tabletop (general installation) 3-14
: checking shipping container 2-15
: configuring Cisco 7200 VXR 4-4
: connecting I/O controller cables 3-20
: connecting port adapter cables 3-20
: connecting power 3-29
: grounding the chassis 3-18
: initial configuration information 2-12
: interface parameters 4-10
: preparing for 2-8
: site requirements 2-3
: starting the router 4-2
: tools for 2-2

interface

: configuration 4-10
: parameters 4-10
: sample configuration 4-14 to 4-15

interference

: radio frequency 2-10

Interior Gateway Routing Protocol

: See IGRP

Internet Packet Exchange

: See IPX

internet protocol

: See IP

: configuring 4-9

IPX

: configuring 4-9

L

LEDs

DC OK 4-2

enabled on interface processors 4-3

I/O controller 1-38, A-5

power supply 1-47, A-5

using for troubleshooting

: I/O controller A-5
: port adapters A-7
: power supply A-5

line con 0 command 4-22

M

MAC addresses

: description 1-57

MAC-layer

: addresses 1-55

memory

: Flash Disk 1-51
: Flash memory card 1-51
: NPE 1-13, 1-17
: NSE 1-13, 1-17

messages

: environmental 1-61
: fan failure 2-5

MII receptacle on I/O controller

: pinouts 3-26

modifications to configuration

: reviewing 4-17

N

network processing engine

: See NPE

network services engine

: See NSE

nonoperating specifications 2-9

nonvolatile random-access memory

: See NVRAM

normal status level

: environmental monitor 1-60, 1-62

no shutdown command 4-22

NPE

: description 1-2, 1-13
: memory 1-13
: memory specifications and configurations 1-17
: removal while system operating 1-58
: system management functions 1-16
: troubleshooting A-4

NSE

: description 1-2, 1-13
: memory 1-13
: memory specifications and configurations 1-17
: system management functions 1-16
: troubleshooting A-4, A-10

numbering

: logical interface 1-53
: port adapter slot 1-53

NVRAM

: log 1-60
: saving and viewing contents 4-17

O

OIR

: functional description 1-58

online insertion and removal

: See OIR

operating conditions for chassis 1-49

operating specifications 2-9

out-of-tolerance voltage condition 1-60

overheating

: at startup A-4
: damage 1-59
: monitoring 1-60
: preventing 2-5

P

Parallel eXpress Forwarding processor

: See PXF processor

password

: recovering lost 4-18

password command 4-22

physical description

: Flash Disk 1-51
: Flash memory cards 1-51
: I/O controller 1-30
: port adapters 1-45
: power supplies 1-46
: rack-mount and cable management kit 1-52
: service adapters 1-45

pinouts

: MII receptacle on I/O controller 3-26

plant wiring

: guidelines 2-10

port adapters

: connecting cables 3-20
: filler 2-6
: logical interface numbering 1-53
: physical description 1-45
: slot numbering 1-53
: troubleshooting A-7, A-10

ports

: auxiliary 3-23
: console 3-21
: optional Fast Ethernet 3-24

power

: connecting 3-29
: DC status 1-60
: subsystem for troubleshooting A-4, A-8
: surge suppression 2-11

power cord

: description 1-48
: troubleshooting A-8

power supply

: and environmental monitor 1-60
: disabled 1-60
: filler panels 2-6
: LEDs 1-47, A-5
: mixing 1-8, 1-12, 1-47
: physical description 1-7, 1-11, 1-46
: shutdown 1-60
: troubleshooting A-5
: types (caution) 1-8, 1-12, 1-47

procedures

: checking shipping container 2-15
: configuring the Cisco 7200 VXR 4-4
: connecting I/O controller cables 3-20
: connecting port adapter cables 3-20
: connecting power 3-29
: grounding the chassis 3-18
: installing brackets on the chassis 3-8
: installing chassis on a tabletop (general installation) 3-14
: rack-mounting chassis 3-2
: replacing or recovering a lost password 4-18
: starting the router 4-2
: viewing system configuration 4-23

processor

: PXF 1-14
: shutdown 1-60
: subsystem for troubleshooting A-4

processor subsystem (troubleshooting)

: I/O controller A-9
: NPE A-10
: port adapters A-10

PXF processor

: description 1-14
: troubleshooting A-10

R

rack-mount installation 3-1

rack-mount kit

: hardware 2-15
: installation 3-2

racks

: equipment 2-6

reload command 4-22

replacing or recovering a lost password 4-18

reset command 4-20

reviewing changes to configuration 4-17

RIP

: configuring 4-9

RJ-45 receptacle (I/O controller)

: crossover cable 3-28
: straight-through cable 3-28

Routing Information Protocol

: See RIP

S

sample configurations

: global parameters 4-6
: interface parameters 4-10

saving the configuration file 4-15, 4-17

serial interfaces

: configuring 4-13

service adapters

: physical description 1-45

setup command 4-6

setup command facility

: banner information (example) 4-6
: configuration 4-6
: description 2-12
: interface summary (example) 4-8
: System Configuration Dialog (example) 4-7

shipping container

: contents 2-15

show commands

: show diag 1-43, 4-23
: show environment 1-61, 2-5, A-11
: show environment last 1-62
: show environment table 1-62, A-11
: show interfaces 1-55
: show running-config 4-17
: show startup-config 4-17, 4-19, 4-21
: show version 4-23

shutdown

: environmental 1-59
: fan failure 1-64
: power supply 1-60
: preventing administrative 4-22
: processor 1-60
: thresholds 1-59

Simple Network Management Protocol

: See SNMP

site log 2-17

site requirements

: environment 2-9
: equipment racks 2-6
: guidelines 2-3
: plant wiring 2-10

slot/port numbers for interfaces 1-55

SNMP

: configuring 4-8

SNMP management 1-17

specifications

: environmental 2-9
: physical 1-3

startup

: system 4-2
: troubleshooting A-4

status

: DC power 1-60
: environmental 1-62, 2-5
: interfaces 1-55

straight-through cable

: RJ-45 receptacle on I/O controller 3-28

subsystems for troubleshooting

: cooling A-4, A-11
: power A-4, A-8
: processor A-4

switch

: power 1-49

synchronous serial interfaces

: configuring 4-13

system banner 4-3

T

telco-type equipment racks 2-6, 3-1, 3-13

temperature

: internal chassis 1-59
: requirements for operation 2-9
: thresholds 1-59

terms and acronyms xiv

tools

: for installation 2-2

troubleshooting A-10

: cooling subsystem A-4, A-11
: I/O controller A-9
: network services engine A-10
: NPE A-10
: parallel express forwarding processor A-10
: port adapters A-10
: power subsystem A-4, A-8
: processor subsystem A-4, A-9
: startup problems A-4
: strategy A-3

V

voltage

: monitoring 1-60

W

warnings

: chassis grounding 3-31
: chassis installation 3-8
: description of xii
: power cord 3-29
: power supply 3-30
: restricted access 2-3
: safety information 1-1, 2-1

warning status level

: environmental monitor 1-60

wiring

: interference 2-10
: plant 2-10

Table of Contents

index