System Specifications

Table B-1: Physical Specifications and Power Requirements

Description Specification

Dimensions (H x W x D)

3.5 in. x 17.5 in. x 18.25 in. (8.89 cm x 44.45 cm x 46.36 cm)

Weight

~ 32 lb (14.5 kg)

Heat dissipation

370W (1262 Btu¹)

Input voltage, AC power supply
Current
Frequency
Power factor
Input AC power

100 to 240 VAC
5 to 2.5A²
50/60 Hz
0.80 to 0.95
525W³ (maximum)

AC-input cable(s)

18-AWG⁴ 3-wire cable, with a 3-lead IEC-320 receptacle on the power supply end, and a country-dependent plug on the power source end

Airflow

~120 cfm⁵

Temperature

32 to 104° F (0 to 40° C) operating; -4 to 149° F (-20 to 65° C) nonoperating

Humidity

10 to 90% noncondensing

LAN interfaces

2 Ethernet 10BaseT/100BaseTX autosensing (RJ-45)

Console and auxiliary ports

Asynchronous serial (RJ-45)

WAN interface options

T1/E1, T3, E3, ATM T3, ATM E3, and ATM OC-3c/STM1 single-mode intermediate reach and multimode

Recommended minimum software requirements

Cisco IOS Release 12.0(4)XE or later releases of 12.0 XE
Cisco IOS Release 12.0(6)T or later releases of 12.0 T

Compliance

CE Marking, FCC Part 68

Safety

UL 1950, CSA 22.2 No. 950, EN60950, AUSTEL TS001, AS/NZS 3260, IEC 950

EMC⁶

FCC Class A (47 CFR, Part 15), ICES-003 Class A, EN55022 Class B, CISPR22 Class B, AS/NZS 3548 Class B, and VCCI Class B

¹Btu = British thermal units.
²A = amperes.
³W = watts.
⁴AWG = American Wire Gauge.
⁵cfm = cubic feet per minute.
⁶EMC = electromagnetic compliance.

Description	Specification
Dimensions (H x W x D)	3.5 in. x 17.5 in. x 18.25 in. (8.89 cm x 44.45 cm x 46.36 cm)
Weight	~ 32 lb (14.5 kg)
Heat dissipation	370W (1262 Btu¹)
Input voltage, AC power supply Current Frequency Power factor Input AC power	100 to 240 VAC 5 to 2.5A² 50/60 Hz 0.80 to 0.95 525W³ (maximum)
AC-input cable(s)	18-AWG⁴ 3-wire cable, with a 3-lead IEC-320 receptacle on the power supply end, and a country-dependent plug on the power source end
Airflow	~120 cfm⁵
Temperature	32 to 104° F (0 to 40° C) operating; -4 to 149° F (-20 to 65° C) nonoperating
Humidity	10 to 90% noncondensing
LAN interfaces	2 Ethernet 10BaseT/100BaseTX autosensing (RJ-45)
Console and auxiliary ports	Asynchronous serial (RJ-45)
WAN interface options	T1/E1, T3, E3, ATM T3, ATM E3, and ATM OC-3c/STM1 single-mode intermediate reach and multimode
Recommended minimum software requirements	Cisco IOS Release 12.0(4)XE or later releases of 12.0 XE Cisco IOS Release 12.0(6)T or later releases of 12.0 T
Compliance	CE Marking, FCC Part 68
Safety	UL 1950, CSA 22.2 No. 950, EN60950, AUSTEL TS001, AS/NZS 3260, IEC 950
EMC⁶	FCC Class A (47 CFR, Part 15), ICES-003 Class A, EN55022 Class B, CISPR22 Class B, AS/NZS 3548 Class B, and VCCI Class B

Table of Contents

System Specifications

System Specifications