Table of Contents
Preface
This preface describes the purpose of the Cisco 7100 Series VPN Router Installation and Configuration Guide, its intended audience, its organization, and its document conventions. This preface also provides information on how to obtain related documentation and defines some technical terms you need to understand when using
this guide.
This installation guide explains the initial hardware installation and basic configuration procedures for Cisco 7100 series routers. It contains procedures for installing the router hardware, starting up the router, and creating a basic software configuration file. After completing the installation and basic configuration procedures covered in this guide, you will then use the appropriate companion publications to more completely configure your system. For a list of the companion publications, see the "Related Documentation" section.
To use this publication, you should be familiar not only with Cisco router hardware and cabling but also with electronic circuitry and wiring practices. You should also have experience as an electronic or electromechanical technician.
The major sections of this guide are as follows:
Your Cisco 7100 series router and the Cisco IOS software running on it contain extensive features and functionality, which are documented in the following resources:
- Cisco Documentation CD-ROM package. (For further information, see the "Documentation CD-ROM" section.)
- Cisco Connection Online (CCO). (For contact information, see the "Cisco Connection Online" section.)
- For international agency compliance, safety, and statutory information for WAN interfaces for Cisco 7100 series routers, refer to the Regulatory Compliance and Safety Information for Cisco 7100 Series VPN Routers document that shipped with your router.
- For information on installing the Integrated Service Module (ISM) refer to the Integrated Service Adapter and Integrated Service Module Installation and Configuration document that shipped with your ISM.
- For information on installing and replacing field-replaceable units (FRUs), such as memory, on Cisco 7100 series routers, refer to the Installing Field-Replaceable Units in Cisco 7100 Series VPN Routers document that ships with each FRU.
- For information on using the Flash Disk, refer to the Using the Flash Disk document that shipped with your router.
- For information on the modular port adapter installed in your router (if present), refer to the individual documents that ship with each port adapter. For example, the PA-4E Ethernet 10BaseT Port Adapter Installation and Configuration document is shipped with PA-4E port adapter spares and with PA-4E port adapters that are installed in the router.
- For additional information on configuring Cisco 7100 series routers, refer to the Cisco 7100 Series VPN Configuration Guide that shipped with your router. This guide contains configuration information and sample configuration files for Virtual Private Networking (VPN) scenarios.
- For detailed Cisco IOS software configuration information and support, refer to the modular configuration and modular command reference publications in the Cisco IOS software configuration documentation set that corresponds to the software release installed on your Cisco hardware. Specifically, you should refer to the following publications:
- For information on setting up quality of service (QoS), refer to the Quality of Service Solutions Configuration Guide and Quality of Service Solutions Command Reference publications.
- For information on encryption, refer to the Security Configuration Guide and the Security Command Reference publications.
- For information on interfaces, refer to the Cisco IOS Interface Configuration Guide and the Cisco IOS Interface Command Reference publications.
- For information on IP, refer to the Network Protocols Configuration Guide, Part 1 and the Network Protocols Command Reference, Part 1 publications.
- You can also refer to the Cisco IOS software release notes for the version of software you are using on your router.
Command descriptions use the following conventions:
| Convention
| Description
|
|---|
boldface font
| Commands and keywords are in boldface.
|
italic font
| Arguments for which you supply values are in italics.
|
[ ]
| Elements in square brackets are optional.
|
{ x | y | z }
| Alternative keywords are grouped in braces and separated by vertical bars.
|
[ x | y | z ]
| Optional alternative keywords are grouped in brackets and separated by vertical bars.
|
string
| A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.
|
screen font
| Terminal sessions and information the system displays are in screen font.
|
boldface screen font
| Information you must enter is in boldface screen font.
|
italic screen font
| Arguments for which you supply values are in italic screen font.
|
|
This pointer highlights an important line of text in an example.
|
^
| The symbol ^ represents the key labeled Control---for example, the key combination ^D in a screen display means hold down the Control key while you press the D key.
|
< >
| Nonprinting characters, such as passwords, are in angle brackets.
|
Note
| Means reader take note. Notes contain helpful suggestions or references to additional information and material.
|
| Tips Means the following are useful tips.
|
| Timesaver This symbol means the described action saves time. You can save time by performing the action described in the paragraph.
|
| Caution This symbol means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
|
| Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance and Safety Information document that accompanied this device.
|
| Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard maatregelen om ongelukken te voorkomen. Voor vertalingen van de waarschuwingen die in deze publicatie verschijnen, kunt u het document Regulatory Compliance and Safety Information (Informatie over naleving van veiligheids- en andere voorschriften) raadplegen dat bij dit toestel is ingesloten.
|
| Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. Tässä julkaisussa esiintyvien varoitusten käännökset löydät laitteen mukana olevasta Regulatory Compliance and Safety Information -kirjasesta (määräysten noudattaminen ja tietoa turvallisuudesta).
|
| Attention Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant causer des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers posés par les circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions d'avertissements figurant dans cette publication, consultez le document Regulatory Compliance and Safety Information (Conformité aux règlements et consignes de sécurité) qui accompagne cet appareil.
|
| Warnung Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu einer Körperverletzung führen könnte. Bevor Sie mit der Arbeit an irgendeinem Gerät beginnen, seien Sie sich der mit elektrischen Stromkreisen verbundenen Gefahren und der Standardpraktiken zur Vermeidung von Unfällen bewußt. Übersetzungen der in dieser Veröffentlichung enthaltenen Warnhinweise finden Sie im Dokument Regulatory Compliance and Safety Information (Informationen zu behördlichen Vorschriften und Sicherheit), das zusammen mit diesem Gerät geliefert wurde.
|
| Avvertenza Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di lavorare su qualsiasi apparecchiatura, occorre conoscere i pericoli relativi ai circuiti elettrici ed essere al corrente delle pratiche standard per la prevenzione di incidenti. La traduzione delle avvertenze riportate in questa pubblicazione si trova nel documento Regulatory Compliance and Safety Information (Conformità alle norme e informazioni sulla sicurezza) che accompagna questo dispositivo.
|
| Advarsel Dette varselsymbolet betyr fare. Du befinner deg i en situasjon som kan føre til personskade. Før du utfører arbeid på utstyr, må du vare oppmerksom på de faremomentene som elektriske kretser innebærer, samt gjøre deg kjent med vanlig praksis når det gjelder å unngå ulykker. Hvis du vil se oversettelser av de advarslene som finnes i denne publikasjonen, kan du se i dokumentet Regulatory Compliance and Safety Information (Overholdelse av forskrifter og sikkerhetsinformasjon) som ble levert med denne enheten.
|
| Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação que lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer equipamento, familiarize-se com os perigos relacionados com circuitos eléctricos, e com quaisquer práticas comuns que possam prevenir possíveis acidentes. Para ver as traduções dos avisos que constam desta publicação, consulte o documento Regulatory Compliance and Safety Information (Informação de Segurança e Disposições Reguladoras) que acompanha este dispositivo.
|
| ¡Advertencia! Este símbolo de aviso significa peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considerar los riesgos que entraña la corriente eléctrica y familiarizarse con los procedimientos estándar de prevención de accidentes. Para ver una traducción de las advertencias que aparecen en esta publicación, consultar el documento titulado Regulatory Compliance and Safety Information (Información sobre seguridad y conformidad con las disposiciones reglamentarias) que se acompaña con este dispositivo.
|
| Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanligt förfarande för att förebygga skador. Se förklaringar av de varningar som förkommer i denna publikation i dokumentet Regulatory Compliance and Safety Information (Efterrättelse av föreskrifter och säkerhetsinformation), vilket medföljer denna anordning.
|
To fully understand the content of this guide, you should be familiar with the following terms and acronyms:
- ABR---Available bit rate
- AAL5---ATM adaptation layer 5
- ATM-DXI---Asynchronous Transfer Mode-Data Exchange Interface
- AWG---American wire gauge
- CoS---Class of service
- CPE---Customer premises equipment
- CRC---Cyclic redundancy check
- CSU---Channel service unit
- CTS---Clear To Send
- DCD---Data Carrier Detect
- DCE---Data communications equipment
- DIMM---Dual in-line memory module
- DSR---Data set ready
- DSU---Data service unit
- DTE---Data terminal equipment
- DTR---Data terminal ready
- EMC---Electromagnetic compliance
- EMI---Electromagnetic interference
- ESD---Electrostatic discharge
- FRU---Field-replaceable unit (router components that do not require replacement by a Cisco-certified service provider)
- FTP---Foil twisted-pair
- HDLC---High-Level Data Link Control
- IGRP---Interior Gateway Routing Protocol
- ILMI---Integrated Local Management Interface
- IPSec---IP Security Protocol
- ISM---Integrated Service Module
- L2F/L2TP---Layer 2 Forwarding and Layer 2 Tunneling Protocol
- LANE---LAN emulation
- MAC---Media Access Control
- MB---Megabyte
- MM---Multimode
- nrt-VBR---Non-real time variable bit rate
- NVRAM---Nonvolatile random-access memory
- OAM AIS---Operation, Administration, and Maintenance alarm indication signal
- OIR---Online insertion and removal
- PCI---Peripheral Component Interconnect
- PCMCIA---Personal Computer Memory Card International Association
- PPP---Point-to-Point Protocol
- QoS---Quality of service
- rcp---remote copy protocol
- RFI---Radio frequency interference
- RIP---Routing Information Protocol
- RISC---Reduced Instruction Set Computing
- RTS---Request To Send
- SAR---Segmentation and reassembly
- SDRAM---Synchronous dynamic random-access memory
- SIMM---Single in-line memory module
- SMDS---Switched Multimegabit Data Service
- SMI---Single-mode intermediate reach
- SNMP---Simple Network Management Protocol
- TCP/IP---Transmission Control Protocol/Internet Protocol
- TDM---Time-division multiplexing
- TFTP---Trivial File Transfer Protocol
- UBR---Unspecified bit rate
- UDP---User Datagram Protocol
- UNI---User-Network Interface
- UTP---Unshielded twisted-pair
- VC---Virtual circuit
- VPN---Virtual Private Network
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
Note If you are a network administrator and need personal technical assistance with a Cisco product that is under warranty or covered by a maintenance contract, contact Cisco's Technical Assistance Center (TAC) at 800 553-2447, 408 526-7209, or tac@cisco.com. To obtain general information about Cisco Systems, Cisco products, or upgrades, contact 800 553-6387, 408 526-7208, or cs-rep@cisco.com.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or
http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
Posted: Mon Feb 7 21:54:23 PST 2000
Copyright 1989 - 2000©Cisco Systems Inc.
