Table of Contents
Preface
This preface explains the objectives and organization of this document and explains how to find additional information on related products and services. This preface contains the following sections:
This document describes the installation and configuration of the multichannel DS1 Integrated Services Digital Network (ISDN) Primary Rate Interface (PRI) single-wide port adapter which is used in the following platforms:
- Catalyst Route Switch Module (RSM)/second-generation Versatile Interface Processor (VIP2) in all Catalyst 5000 family switches
 |
Note The Catalyst RSM/VIP2 does not support the PA-MC-2T1 multichannel DS1/PRI port adapter. |
- Catalyst 6000 family FlexWAN module in the Catalyst 6000 family switches
|
Note The Catalyst 6000 family FlexWAN module supports the PA-MC-8T1 multichannel DS1/PRI port adapters only. |
- Cisco 7200 series routers—which consist of the two-slot Cisco 7202, the four-slot Cisco 7204 and Cisco 7204VXR, and the six-slot Cisco 7206 and Cisco 7206VXR
- Cisco uBR7200 series universal broadband routers—which consist of the six-slot (four cable modem card slots and two port adapter slots) Cisco uBR7246 and the three-slot (two cable modem card slots and one port adapter slot) Cisco uBR7223
- Second-generation Versatile Interface Processor (VIP2) in all Cisco 7500 series routers and in Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI)
- Fourth-generation Versatile Interface Processor (VIP4) in all Cisco 7500 series routers and in Cisco 7000 series routers with the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI)
This document is organized into the following sections:
Your router or switch and the Cisco IOS software running on it contain extensive features and functionality, which are documented in the following resources:
- For configuration information and support, refer to the modular configuration and modular command reference publications in the Cisco IOS software configuration documentation set that corresponds to the software release installed on your Cisco hardware.
- For hardware installation and maintenance information, refer to the following publications:
- Route Switch Module Catalyst VIP2-15 and VIP2-40 Installation and Configuration Note
- Catalyst 5000 Series Route Switch Module Installation and Configuration Note
- The installation and configuration guide that shipped with your Catalyst 5000 family switch
- Catalyst 6000 family FlexWAN module:
- For hardware installation and maintenance information, refer to the following publications:
- Catalyst 6000 Family FlexWAN Module Installation and Configuration Note
- The installation and configuration guide that shipped with your Catalyst 6000 family switch
- Cisco 7200 series routers:
- For port adapter hardware and memory configuration guidelines, refer to the Cisco 7200 Series Port Adapter Hardware Configuration Guidelines.
- For hardware installation and maintenance information, refer to the installation and configuration guide that shipped with your Cisco 7200 series router.
- Cisco 7200 VXR routers:
- For hardware installation and maintenance information, refer to the Cisco 7200 VXR Installation and Configuration Guide that shipped with your Cisco 7200 VXR router.
- Cisco uBR7200 series routers:
- For installation and maintenance information, refer to the hardware installation and software configuration guide that shipped with your Cisco uBR7200 series router.
- VIP2 in Cisco 7000 series and Cisco 7500 series routers:
- For hardware installation and maintenance information, refer to the following publications:
- VIP4 in Cisco 7000 series and Cisco 7500 series routers:
- For hardware installation and maintenance information, refer to the following publications:
- For international agency compliance, safety, and statutory information for WAN interfaces:
- Site Preparation and Safety Guide
- Regulatory Compliance and Safety Information for the Cisco 7000 Series Routers
- Regulatory Compliance and Safety Information for Cisco 7100 Series VPN Routers
- Regulatory Compliance and Safety Information for the Cisco 7200 Series Routers
- Regulatory Compliance and Safety Information appendix in the Cisco uBR7200 Series Universal Broadband Router Hardware Installation Guide
- Regulatory Compliance and Safety Information for the Cisco 7500 Series Routers
- To view Cisco documentation or obtain general information about the documentation, refer to the following sources:
- "Cisco Connection Online" section.
- "Documentation CD-ROM" section.
- Customer service at 800 553-6387 or 408 526-7208. Customer service hours are 5:00 a.m. to 6:00 p.m. Pacific time, Monday through Friday (excluding Cisco-observed holidays). You can also send e-mail to cs-rep@cisco.com.
- Cisco Information Packet that shipped with your router or switch.
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
|
Note If you are a network administrator and need personal technical assistance with a Cisco product that is under warranty or covered by a maintenance contract, contact Cisco's Technical Assistance Center (TAC) at 800 553-2447, 408 526-7209, or tac@cisco.com. To obtain general information about Cisco Systems, Cisco products, or upgrades, contact 800 553-6387, 408 526-7208, or cs-rep@cisco.com. |
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
Posted: Wed Sep 6 14:02:00 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.
