Table of Contents
index
- # character
- privileged EXEC prompt A-5
- > prompt
- user EXEC mode A-4
- ? command A-6
- abbreviating commands
- context-sensitive help A-6
- accessing the Cable Monitor 6
- access router configuration 2-11
- alias command B-3
- boot command B-3
- booting
- from the ROM monitor B-3
- bridging, DOCSIS 1-1
- cable helper-address command 3-5
- Cable Monitor 1-3, 1 to 20
- accessing 6
- cable interface information page 15
- CPE state information page 13
- debug information page 19
- disabling 5
- enabling 3
- home page 9
- initialization information page 10
- ip http cable-monitor command 6
- modes of operation 1, 3
- performance information 17
- security considerations 4
- command
- alias B-3
- boot B-3
- cable helper-address 3-5
- confreg B-4
- cont B-5
- context B-5
- cookie B-5
- debug cable-modem mac messages dynsrv 1, 2
- dev (device) B-6
- dir B-6
- dlnd B-6
- frame B-6
- history B-6
- ip address dhcp 1-3, 1, 5
- ip address negotiated 1-3
- ip forward-protocol 3-5
- ip helper-address 3-5
- ip http cable-monitor 3, 5, 1, 6
- ip http server 3, 5
- meminfo B-6
- repeat B-7
- reset B-7
- ROM monitor B-3
- ROM monitor diagnostics B-1
- set B-7
- show buffers 19
- show controller c0 mac state 19
- show controllers 19
- show controllers cable-modem qos 1, 8
- show interfaces 19
- show process cpu 19
- show process memory 19
- show region 19
- show running-config 19
- show stacks 19
- show version 19
- stack B-7
- sync B-7
- sysret B-7
- unalias B-7
- command history
- buffer size A-8
- commands, recalling A-7
- description A-7
- command modes
- global configuration A-5, A-6
- interface configuration A-5, A-6
- privileged EXEC A-5
- summary (table) A-4
- user EXEC A-4
- configuration register B-4
- configurations
- Cisco IOS configuration file 2-7
- configuring the access router 2-11
- configuring the serial interface 2-9
- DHCP server 2-2, 3-5
- DOCSIS configuration file 2-3
- MAX CPE parameter 2-6
- NAT/PAT 3-7
- routing operation 3-1
- using the vendor-specific information field 2-7
- confreg command B-4
- cont command B-5
- context command B-5
- cookie command B-5
- CPE, maximum 2-6
- debug cable-modem mac messages dynsrv command 1, 2
- dev (device) command B-6
- DHCP server configuration 2-2, 3-5
- diagnostics
- ROM monitor B-1
- dir command B-6
- disabling the Cable Monitor 5
- dlnd command B-6
- DOCSIS configuration file 2-3
- using the vendor-specific information field 2-7
- DOCSIS IP bridging 1-1
- Easy IP feature set 1-2
- enabling the Cable Monitor 3
- EXEC
- commands
- privileged level A-5
- switching from privileged to user A-5
- user level A-4
- frame command B-6
- global configuration mode
- accessing A-5
- commands A-5
- exiting A-5
- summary A-4
- help
- See context-sensitive help
- help command A-6
- history command B-6
- Home Office feature set 1-2
- initial power-on
- description 1-6
- installation
- connecting console cables A-2
- interface configuration mode
- description A-5
- summary A-4
- IOS configuration file 2-7
- ip address dhcp command 1-3, 1, 5
- ip address negotiated command 1-3
- ip forward-protocol command 3-5
- ip helper-address command 3-5
- ip http cable-monitor 5
- ip http cable-monitor command 3, 1, 6
- ip http server command 3, 5
- MAX CPE parameter 2-6
- meminfo command B-6
- modes
- See command modes
- NAT/PAT 1-4
- configuration 3-7
- Network Address Translation 1-4
- number character
- privileges EXEC prompt A-5
- privileged EXEC mode
- accessing A-5
- description A-5
- prompt A-5
- summary A-4
- procedures
- connecting console cables A-2
- prompts
- system A-4
- provisioning
- description 1-6
- question command A-6
- repeat command B-7
- reset command B-7
- RIPv2 1-5
- ROM monitor
- commands B-3
- diagnostics B-1
- entering
- B-1
- Routing Information Protocol 1-5
- routing operation configuration 3-1
- Secure Shell (SSH) 1-5
- security when using the Cable Monitor 4
- serial interface
- configuring 2-9
- set command B-7
- show buffers command 19
- show controller c0 mac state command 19
- show controllers cable-modem qos command 1, 8
- show controllers command 19
- show history command A-7, A-12
- show interfaces command 19
- show process cpu command 19
- show process memory command 19
- show region command 19
- show running-config command 19
- show stacks command 19
- show version command 19
- stack command B-7
- sync command B-7
- sysret command B-7
- unalias command B-7
- user EXEC mode
- commands A-4
- description A-4
- summary A-4
- vendor-specific information field 2-7
- VSIF, see vendor-specific information field
Posted: Fri Jul 21 12:42:34 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.
