Index

index

A

adapter pinouts B-10

auxiliary port

: pinouts B-10

B

baffles and cooling air 3-4

brackets

: attaching to chassis (figure) 3-7
: identifying (figure) 3-5
: installing, front panel forward (figure) 3-5, 3-6
: installing, rear panel forward (figure) 3-6
: telco, installing (figure) 3-7

brackets, installing 3-5

C

cable

: jacks, in wet locations 2-3
: safety guidelines 2-3
: ungrounded and uninsulated 2-3

Cable Link LED 4-5

cable modem

: definition 1-1

Caution

: incorrect configuration file 1-11

caution

: antistatic strap 2-3
: cable modem, overheating 2-5
: scoring coaxial cable connectors 2-7

chassis

: rack-mounting 3-5

coaxial cable 4-7

: condition of 4-7
: subsystem for troubleshooting 4-4, 4-7

connections

: coaxial cable 3-7
: power 3-9

connectors

: EIA/TIA-449 B-4
: EIA-530 B-6
: V.35 B-5
: X.21 B-5

console port

: pinouts B-10

cooling recommendations 3-4

D

data operations

: description 1-14
: downstream transmissions 1-14
: upstream transmissions 1-15

DCE, connections 1-17

digital signal, subsystem for troubleshooting 4-4

distance limitations, serial signal 1-18

distance limitations, transmission 2-7

downstream transmissions

: description 1-14

DTE connections 1-17

E

EIA/TIA-449

: connector B-4

EIA-530

: connector B-6

electromagnetic pulse (EMP), avoiding 2-6

EMI, shielding 2-3

I

incorrect configuration file 1-11

information, additional C-1

initial power-on

: description 1-9

installation

: connecting the CATV cable 3-7
: rack-mount 3-5

interference, radio frequency 2-6

IOS images

: upgrading 1-13

J

: jewelry, avoiding for safety 2-2

L

LEDs

: Link 4-5
: OK 4-5

lightning storm, safety during 2-3

M

mounting

: See rack equipment 3-4

N

: note, description of x

O

operating conditions for unit 1-8

operations

: data connections 1-14

P

pinouts

: console port B-10

power

: connections 3-9
: site requirements 3-3
: subsystem for troubleshooting 4-4, 4-6
: surge suppression 2-6
: ungrounded 2-3

power factor corrector, power supply 3-3

power supply, physical description 1-8

prerequisites

: provisioning 1-12

problem solving, subsystem 4-4

procedures

: connecting the CATV cable 3-7

provisioning

: description 1-9
: overview (figure) 1-12
: prerequisites 1-12

R

rack equipment

: configuration 3-4
: installation 3-5

RF signal, subsystem for troubleshooting 4-4

RS-449

: See EIA/TIA-449

RS-530

: See EIA-530

S

safety recommendations

: preventing electrostatic discharge damage 2-3
: safety with electricity 2-2

serial

: considerations 1-16
: DTE connections 1-17
: signal distance limitations 1-18

serial DCE connections 1-17

site requirements

: environment 2-5
: power 3-3

subsystems for troubleshooting

: coaxial cable 4-7
: power 4-6

synchronous serial connections 1-16

system specifications A-1

System status LED 4-5

T

timesaver, description x

troubleshooting

: coaxial cable subsystem 4-7
: identifying installation problems 4-2
: power subsystem 4-6
: strategy 4-4

U

UniverCD, ordering C-1

upgrading IOS images 1-13

upstream transmissions

: description 1-15

User LED 1 4-5

User LED 2 4-6

User LED 3 4-6

V

V.35

: connector B-5

W

wiring

: quality and requirements 2-6

X

X.21

: connector B-5

Table of Contents

index