|
|
The LightStream 1010 ATM switch processor (ASP) specifications are described in Table B-1.
For the LightStream 1010 ATM switch chassis and common equipment specifications, refer to the appendix "System Chassis Specifications" in the LightStream 1010 ATM Switch Hardware Installation Guide. For port adapter module (PAM) specifications, refer to the appendix "CM and PAM Specifications" in the LightStream 1010 ATM Switch PAM Installation Guide.
| Description | Specifications |
|---|---|
| Switch and processor capacity | 5-Gbps shared memory, nonblocking switch fabric 65,536 cells of ATM cell buffers |
| Dimensions (H x W x D) | ASP: 1.2 x 14.4 x 16 in. (3.0 x 36.6 x 40.6 cm) |
| Weight | 6.85 lb (3.09 kg) |
| DC voltages supplied and steady-state maximum current ratings | System: +5V @ 70A +12V @ 2A +24V @ 0.2A ASP: +5V @ 15A +24V @ 25mA +12V @ 500mA |
| Operating temperature | 32 to 104×F (0 to 40×C) |
| Nonoperating temperature | -40 to 167×F (-40 to 75×C) |
| Humidity | 10 to 90%, noncondensing |
| Altitude | -500 to 10,000 ft. (-52 to 3048 m) |
| Microprocessor | 100-MHz MIP1 R4700 |
| Memory | 8-MB Flash memory SIMM (upgradable to 16 MB) 32-MB DRAM2 default for FC-PCQ3 (upgradable to 64 MB) and 64-MB DRAM default for FC-PFQ4 256-KB boot EPROM5 128-KB SRAM6 No Flash memory (PCMCIA7) card installed by default (accepts 8-, 16-, or 20-MB Intel Series 2+ Flash memory cards) |
| Interface timing | Loop timing, Stratum 4 accuracy clock for self-timing, master clock distribution port |
| Management access | Standard Ethernet and dual EIA/TIA-2328 serial ports on the ASP |
| Connections | 32,000 point-to-point, 2048 multi-to-multipoint VC9 and VP10 switching, VP tunneling PVC11 and SVC12 F4 and F5 OAM13 segment and end-to-end flows, RDI14 and AIS15 OAM PING on IP or ATM address |
| Interface ports | RJ-45 IEEE16 802.3 Ethernet 10BaseT port DB-25 EIA/TIA-232 auxiliary port and a DB-25 console port for an administration workstation |
| Network management | Port TX17 and RX18 LEDs19, switch and common equipment status LEDs Port snooping20 and connection steering Multiple standard and Enterprise MIBs21 Text-based command-line interface based on familiar router interface Standard Cisco IOS security capabilities: password and TACACS,22 Telnet, TFTP23, BOOTP, LAN Emulation client, RFC24 1577 Classical IP over ATM client (for management access) |
| MIBs | SNMP MIB II (RFC 1213) Interface table MIB (RFC 1573) AToM MIB (RFC 1695) ATM Forum PNNI 1.0 MIB ATM Forum UNI 3.0/3.1 ILMI25 4.0 MIB |
| Agency Approvals | UL26 1950 (U.S.) CSA27 950 (Canada) EN2860950 (European Union) CE Marking TUV29 GS (Germany) IEC30 950 (International) AS/NZS31 3260 (Australia/New Zealand) CE Marking FCC32 Part 15 (CFR 47) Class A VCCI33 Class A with UTP and Class B with shielded cables (Japan) EN55022 Class A with UTP and Class B with shielded cables (European Union) CISPR34 22 Class A with UTP and Class B with shielded cables (International) AS/NZS 3548 Class A with UTP and class B with shielded cables |
|
|