|
|
This appendix lists and describes system error messages for the LightStream 1010 Asynchronous Transfer Mode (ATM) switch. The system software sends these error messages to the console (and, optionally, to a logging server on another system) during operation. Not all system error messages indicate problems with your system. Some are purely informational, while others may help diagnose problems with communications lines, internal hardware, or the system software.
The system error message main section provides descriptions of error messages organized according to the particular system facility that produces the messages. The facilities sections appear in alphabetical order, and within each system facility section, messages are listed alphabetically by mnemonic. Each error message is followed by an explanation and a recommended action. System error messages appear only when the system remains operational.
Error message severity levels correspond to the keywords assigned by the logging global configuration commands that define where and at what level these messages appear. The default is to log messages to the console at the debugging level (7).
System error messages begin with a percent sign and are structured as follows:
%FACILITY-SEVERITY-MNEMONIC: Message-text
FACILITY is a code consisting of two or more uppercase letters that indicate the facility to which the message refers. A facility can be a hardware device, a protocol, or a module of the system software. Table B-1 lists the system facilities codes.
| Code | Facility |
|---|---|
| AAL5 | ATM adaptation layer 5 |
| ATM | ATM specific errors |
| ATMCORE | ATM core software |
| ATMSIG | ATM signaling |
| CI | Environment monitor |
| DCU | <TBD> |
| DS3E3SUNI | DS3/E3 drivers |
| LANE | LAN emulation |
| Miscellaneous | Miscellaneous error messages |
| OC3SUNI OC12SUNI | Optical carrier 3 driver Optical carrier12 driver |
| OIR | Online insertion and removal |
| PNNI/IISP | PNNI or IISP routing |
| SONICT | Ethernet driver |
| T1E1SUNI | T1 and E1 interfaces |
SEVERITY is a single-digit code from 0 to 7 that reflects the severity of the condition. The lower the number, the more serious the situation. Table B-2 lists the severity levels.
| Level | Description |
|---|---|
| 0 - emergency | System unusable |
| 1 - alert | Immediate action needed |
| 2 - critical | Critical condition |
| 3 - error | Error condition |
| 4 - warning | Warning condition |
| 5 - notification | Normal but significant condition |
| 6 - informational | Informational message only |
| 7 - debugging | Appears during debugging only |
MNEMONIC is a code that uniquely identifies the error message.
Message-text is a text string describing the condition. This portion of the message sometimes contains detailed information about the event, including terminal port numbers, network addresses, or addresses that correspond to locations in the system memory address space. Because the information in these variable fields changes from message to message, it is represented here by short strings enclosed in square brackets ([ ]). A decimal number, for example, is represented as [dec]. Table B-3 lists the representations of variable fields and the type of information in them.
The following is a sample system error message:
%SONICT-3-XMIT_ERR: TX Error [hex]
| Representation | Type of Information |
|---|---|
| [dec] | Decimal number |
| [hex] | Hexadecimal number |
| [char] | Single character |
| [chars] | Character string |
Some messages describe internal errors and contain traceback information. This information is very important and should be included when you report a problem to your technical support representative.
The following sample message includes traceback information:
-Process= "Exec", level= 0, pid= 17LightStream 10101 ATM switch software error messages.
ATM adaptation layer 5 error messages.
Explanation ATM output error. Bad enctype.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation AAL5 send error. MMC queue cell failed.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Out of reassembly memory buffers error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation AAL5 does not handle such large packets error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation No more big AAL5 packets error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Origin port number error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Asynchronous Transfer Mode error messages
Explanation This message can occur for the following unrelated reasons. Each reason is accompanied by a recommended action.
Recommended Action If none of the previous actions fix the problem, copy the error message exactly as it appears and report it to your technical support representative.
Explanation The calling or called party has a maximum transmission unit (MTU) size configured that is different from the MTU size on the current interface.
Recommended Action Either change the configured MTU size on the current interface to that of the caller's or called party's interface, or change the caller's or called party's interface to match the current interface.
Explanation The system attempted to allocate some memory but failed.
Recommended Action Reduce the RAM usage or add more RAM to your switch.
Explanation The system attempted to create a virtual circuit (VC) with traffic shaping parameters not supported by the hardware.
Recommended Action Either change the requested traffic shaping parameter to one that the hardware supports, or use existing parameters to avoid the need for a new rate queue.
ATM CORE software error messages.
Explanation Nonvolatile RAM generation connection traffic table row found with stable row and bad service category.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management physical and logical interface two interface ID error. Null logical resource management control block.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management physical and logical interface two interface ID error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management physical/logical interface to interface ID error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Get interface physical and logical resource management control block from interface control block error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Get interface physical/logical resource management control block from interface control block error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation CPU interface check error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Create logical interface resource management error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Create logical interface resource management error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Create logical interface resource management error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Set physical port maximum cell rate error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Create physical interface resource management error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Create physical interface resource management error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Create physical interface resource management error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Create physical interface resource management error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Create physical interface resource management error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management interface initialization error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management logical interface creation error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management logical interface creation error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management logical interface creation error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management logical interface creation error. Can't get receive connector traffic table row.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management logical interface creation error. Can't get transmit connector traffic table row.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management logical interface deletion error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management get default quality of service object error. Bad input.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Service category to traffic parameter service category error. Bad service category.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Display interface hardware connection error. No control traffic table row.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Display interface hardware connection error. No interface control block.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Display interface hardware connection error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Display interface resource management error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Print connection traffic table error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM resource management show command error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM resource management show command error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection traffic table initialization error. Error allocating default at startup row.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Configuring connection traffic table error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM resource management show command error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Errors detected in nonvolatile RAM generation of connection traffic table.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM resource management configuration command error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Change physical interface queue threshold request error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Nonvolatile RAM generation parameter limits error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Nonvolatile RAM generation parameter limits error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Nonvolatile RAM generation output queue error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Nonvolatile RAM generation start service category error. Bad service category selected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Nonvolatile RAM generation output queue. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM resource management show command error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM resource management initialization configuration command error. Bad nonvolatile RAM generation value selected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Is output quality of service correct? Bad service category.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Is flow policy OK? Bad service category.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Are service categories correct? Bad service category.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Interface list connection reset get request error. Bad interface selection.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource call admission control request error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource call admission control request error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource call admission control request error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management resource call admission control get interface connection resource. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management resource call admission control get interface connection resource. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management resource call admission control get interface connection resource. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management resource call admission control release interface connection resource. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management resource call admission control, are traffic parameters consistent. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management resource call admission control release connection reset. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Allocate new stable row error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Allocate new transient row error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Traffic is not compatible to the connection error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection traffic table error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection traffic table initialization error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection traffic table initialization error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection traffic table stable row allocation error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection traffic table stable row allocation error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection traffic table row get request error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management transient connection traffic table row acknowledgment. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection traffic table row detach request error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection traffic table are flows the same error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection traffic table are flows the same error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection traffic table check row deletion error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management change all available bit rate interface request threshold. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management change cell loss priority limit error. Hardware error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management global configuration error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Check change port matrix error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management physical interface output queue configuration error. Could not install hardware.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management physical interface output queue service category threshold configuration error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management physical interface output queue service category threshold configuration error. Cannot install if available bit rate interface threshold in hardware.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management physical interface output queue service category threshold configuration error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management physical interface cells flow configuration error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management physical interface traffic parameter limit configuration. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Derive traffic type from object ID error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM traffic description parameter entry configuration error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation A set physical interface static metrics error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Initialize physical interface platform dependent resource management values error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Get default physical interface output queue maximum size error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Initial physical interface platform dependent resource management values error. Hardware error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management installation interface hardware error. Cannot install maximum queue size.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management installation interface hardware error. Cannot install interface available bit rate threshold.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management installation interface hardware error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management switch hardware installation error. Cannot install priority limit.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Select traffic value error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Select traffic value error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Output queue quality of service value error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Accumulate output quality of service metric error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Traffic complete and consistent error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Traffic flow parameter limits error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Can admit point to multipoint flow error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Can admit point to multipoint flow error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Allocate flow Ebw error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Release flow Ebw error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management change connected half leg error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management background change interface connection parameter error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management background change interface connection parameter error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Derive PifIM error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management interface installation pacing error. Cannot install port pacing.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Convert service category row to SNMP format error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Same traffic parameters error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Convert interface to extract row data. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management get transmit output queue error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management is feature card high priority error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Fetch physical interface error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management get input usage parameter control parameter error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management get input usage parameter control parameter error. Bit rate too set too high.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management get input usage parameter control parameter error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management get transmit queue threshold error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management get transmit queue threshold error.A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection get feature card transmit queue threshold error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Resource management connection get feature card transmit queue threshold error. A data structure inconsistency was detected.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Invalid massage received from routing. Number of ports greater than maximum.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Invalid massage received from routing. No ports can be found to route this call.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Invalid massage received from PNNI routing error. Null message received.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Invalid massage received from routing. Message type not valid.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Invalid massage received from routing. Source process not valid. It must be a routing module.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Invalid massage received from routing. Destination process not valid. It must be a signaling module.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Invalid massage received from routing. Null current party.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Invalid massage received from routing. No signaling control block.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Invalid massage received from routing. Message code not responding.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Invalid massage received from routing. Message version bad.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Invalid massage received from routing. Null message.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM signaling failed half-leg removal error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM signaling failed to remove the second half-leg of a connection.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM signaling finds an internal critical error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM signaling could not allocate memory.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM signal control block is not found for a party message.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation ATM signal control block is not found for an input message.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Environment monitor error messages.
Explanation AC and DC power supply can not be mixed in the same chassis.
Recommended Action Remove either the AC or DC power supply.
Explanation The system has shutdown because the internal chassis temperature is too high.
Recommended Action Check the system fan and the area around the chassis.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation System power supply has no error.
Recommended Action This message is provided for information only.
Explanation System temperature overheat error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation System temperature has no error.
Recommended Action This message is provided for information only.
Explanation System Fan failure error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation System fan has no error.
Recommended Action This message is provided for information only.
Explanation System power supply number failure error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation System power supply number has no error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Power supply status has changed error.
Recommended Action This message is provided for information only.
Recommended Action None
DCU error messages.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a memory error for the IDB structure subblock.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a memory error for the ATM database.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a memory error for the port database.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a memory error for the IDB structure.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a memory error for the digital system structure.
Recommended Action If this message occurs, contact your technical support representative for assistance.
DS3E3SUNI driver error messages.
Explanation The unit described has a memory error for the IDB structure.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a memory error for the digital system structure.
Recommended Action If this message occurs, contact your technical support representative for assistance.
LAN emulation software error messages.
Explanation An internal error occurred.
Recommended Action This error should not occur. Download the system error log, then call your technical support representative and provide the log, the error message, and the switch configuration.
Explanation An emulated LAN (ELAN) name was entered in a command that is longer than 32 characters. The LANE standard v1.0 requires a name that is 32 characters or less in length.
Recommended Action Re-enter a shorter name.
Explanation The user specified a Token-Ring-emulated LAN, which is not currently supported.
Recommended Action Specify an Ethernet-emulated LAN. Future software releases will support Token Ring ELANs.
Explanation The lane server-bus command was reissued to start the LANE service components while the switch was trying to execute a previously issued lane server-bus command.
Recommended Action Wait for the initial lane server-bus command to either succeed or fail. The status of the server bus can be checked via the show lane server-bus interface sub-interface name command. The previous command can also be cancelled with the no lane server-bus command. If these steps fail to clear the problem, issue the shutdown command followed by a no shutdown command cycle on the subinterface, or on the whole interface. As a last resort, issue the no interface sub-interface name command followed by the shutdown, no shutdown command cycle.
Explanation An internal error occurred while system routines were handling ATM signaling messages for LANE.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation An internal error occurred while system routines were handling ATM signaling messages for LANE.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation An internal error occurred while system routines were handling ATM signaling messages for LANE.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation An internal error occurred while system routines were handling ATM signaling messages for LANE.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation A hardware or software error occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation The client cannot obtain an ATM address from the given configuration, or auto-assignment failed to get an ATM prefix from the switch.
Recommended Action If you expect the switch to assign the prefix to the switch, check that the Interim Local Management Interface (ILMI) is functional and the switch has a prefix configured. Otherwise, confirm that the client has an address in the NVRAM configuration.
Explanation A software or hardware error occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation The client received a control message over one of its control virtual channel connections (VCCs) that failed the header check.
Recommended Action This message indicates a noninteroperable LANE configuration server, LANE server, or LANE client implementation on the emulated LAN.
Explanation A software or hardware error occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation A software or hardware error occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation A software or hardware error occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation The client failed an attempt to listen on a particular ATM address.
Recommended Action Reconfigure the client ATM address. It is conflicting with another component on the ATM Interface Processor (AIP) for the same ATM address.
Explanation ATM signaling sent the client an unexpected message type.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation A hardware or software error occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation A hardware or software error occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation An internal consistency error occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation The LANE configuration server address could not be registered with or de-registered from the switch, using Interim Local Management Interface (ILMI).
Possible causes
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation A hardware or software error occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation Software was unable to compute an ATM address based on the ATM address template given. The characters in chars (see above display) will be either "BUS" (broadcast-and-unknown), "server," or "config server" in the actual error message.
Recommended Action Enter a correct ATM address template for the LANE component ("BUS," "server," or "config server") named in the error message.
Explanation An internal error occurred.
Recommended Action This error should not occur. Download the system error log, then call your technical support representative and provide the log, the error message, and the switch configuration.
Explanation An attempt was made by the specified LANE client to register a MAC address and ATM address pair that duplicated an ATM address already registered to another LANE client.
Recommended Action Use the show lane server command to list the registered addresses in the LANE server reporting the error. Correct one of the two LANE clients that is trying in error to use the same ATM address.
Explanation An attempt was made to define two different server-direct PVCs both on the same subinterface (same LANE server) and both for the same client (LECID).
Recommended Action Delete one of the lane pvc commands that has this duplicated LECID.
Explanation An attempt was made by the specified LANE client to register a MAC address and ATM address pair that duplicated a MAC address already registered to another LANE client.
Recommended Action Use the show lane server command to list the registered addresses in the LANE server reporting the error. Correct one of the two LANE clients that is trying in error to use the same MAC address.
Explanation The LANE server specified has 65279 clients. No more can be added.
Recommended Action Change the configurations to avoid trying to have more than 65279 LANE clients on this server.
Explanation An internal error occurred.
Recommended Action This error should not occur. Download the system error log, then call your technical support representative and provide the log, the error message, and the switch configuration.
Explanation An internal error occurred.
Recommended Action This error should not occur. Download the system error log, then call your technical support representative and provide the log, the error message, and the switch configuration.
Explanation The LANE software created a PVC (normally 0/17) for accessing the LANE configuration server.
Recommended Action Informational message only. No action required.
Explanation Both the LANE client and the LANE server/broadcast-and-unknown server may have an emulated LAN name specified in the configuration via the lane server-bus and lane client commands. If both specify the emulated LAN name, then the name cannot be changed by re-entering just one of the commands.
Recommended Action Use the no lane server-bus command to delete the server/broadcast-and-unknown server or the no lane client command to delete the client. Then, the other of the two commands can be re-entered with another emulated LAN name. Finally, re-enter the deleted command with the new emulated LAN name.
Explanation Entering a new ATM address template for some LANE component caused the specified LANE server or bus to drop all clients and restart.
Recommended Action Informational message only. No action required.
Explanation The Interim Local Management Interface (ILMI) feature is not included in the software build running on the switch.
Recommended Action Reload switch with software that includes the ILMI feature.
Explanation An attempt was made to create a new subinterface while a previous version of the subinterface was still being destroyed.
Recommended Action Wait a minute and try again. If failure still occurs, try shutting down the main interface. Rebooting may be required to recover in extreme cases.
Explanation An attempt to register the given ATM address with the ATM switch failed. This failure can occur because the ATM switch is down or misconfigured. The registration will be retried.
Recommended Action If the situation persists after a number of attempts, and the switch is up, the configuration of the switch and switch must be examined. The most likely cause is that ATM address being registered is not compatible with the parameters -- for example, the ATM address prefix -- configured in the switch. Correct the configuration.
Explanation When trying to create PVC 0/17, the switch ran out of PVC resources.
Recommended Action The number of PVCs can be increased with the atm maxvc command.
Explanation The characters in chars (see above display) will be either "ATM address" or "LECID." This message is reported when a permanent virtual circuit (PVC) is created without all the necessary information included in the lane pvc command.
Recommended Action Include a lane pvc command with the information appropriate for the PVC.
Explanation An attempt to create the named PVC failed. The most likely reason is that a PVC was defined on the same or another subinterface with the same virtual path identifier-virtual channel identifier (VPI-VCI) pair, but with a different encapsulation or usage type.
Recommended Action Correct the configuration.
Explanation An internal error occurred.
Recommended Action This error should not occur. Download the system error log, then call your technical support representative and provide the log, the error message, and the switch configuration.
Explanation Both the LANE client and the LANE Server/BUS may have an ELAN type specified in the configuration via the lane server-bus and lane client commands as either Ethernet or Token Ring. If both, specify the type; the type cannot be changed by re-entering just one of the commands.
Recommended Action Use the no lane server-bus command to delete the server-bus or the no lane client command to delete the client. Then, the other of the two commands can be re-entered with a new type. Finally, re-enter the deleted command with the new type.
Explanation A software or hardware error occurred.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The ASP Feature Card did not reset.
Recommended Action Try resetting the switch again.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The ASP Feature Card, Version II, will only work with IOS Version 11.2 or later software.
Recommended Action Update your LightStream 1010 IOS software to Version 11.2 or later.
Explanation Interface output packet has too many bytes.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation A bad or missing ID EEPROM error occurred on the controller type described.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation No memory is available to allow hot-swapping to store the current PAM interface configuration.
Recommended Action If this message occurs, contact your technical support representative for assistance.
OC3SUNI and OC12SUNI driver error messages.
Explanation The unit described has a memory error for the IDB structure.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a memory error for the ds structure.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a memory error for the interface data block structure.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a memory error for the ds structure.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Online insertion and removal error messages.
Explanation System shutdown due to overheat error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Card inserted in the slot, sub card, port, and interfaces described has been administratively shutdown.
Recommended Action This message is provided for information only.
Explanation Card inserted in the slot, sub card, port, and interfaces described has been disabled.
Recommended Action This message is provided for information only.
Explanation While hot-swapping a PAM the system has detected the card is not seated properly.
Recommended Action Remove the card and reinsert it.
PNNI and IISP routing error messages.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal software error has occurred.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Unrecognized type of PNNI packet has been received.
Recommended Action Check the sender of the packet for any possible problem.
Explanation Unrecognized type of PNNI packet has been received.
Recommended Action Check the sender of the packet for any possible problem.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal error occurred.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation An internal software error has occurred.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation An internal software error has occurred.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Automatic soft PVC port address assignment fails. Address derived from the switch's prefix for soft PVC port clashes with an existing address in the prefix table.
Recommended Action If possible, assign a new MAC address to the end system that causes the clash.
Explanation An internal software error has occurred.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation An internal software error has occurred.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation An internal software error has occurred.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation An internal software error has occurred.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation An internal software error has occurred.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Unrecognized request message from signaling error process.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Invalid PNNI request packet has been received.
Recommended Action Check the sender of the packet for any possible problem.
Explanation Invalid PNNI database summary packet has been received.
Recommended Action Check the sender of the packet for any possible problem.
Explanation Invalid PNNI database summary packet has been received.
Recommended Action Check the sender of the packet for any possible problem.
Explanation Invalid PNNI database summary packet has been received.
Recommended Action Check the sender of the packet for any possible problem.
Explanation Invalid PNNI database summary packet has been received.
Recommended Action Check the sender of the packet for any possible problem.
Explanation Invalid neighbor state found.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation A neighbor is being removed but interface list still shows some interface.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Cannot locate a neighbor to be deleted.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation An internal software error has occurred.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation PNNI detects a port looped back to itself.
Recommended Action Check the sender of the packet for a possible problem.
Explanation Invalid ACK packet has been received.
Recommended Action Check the sender of the packet for a possible problem.
Explanation Invalid ACK packet has been received.
Recommended Action Check the sender of the packet for a possible problem.
Explanation Invalid ACK packet has been received.
Recommended Action Check the sender of the packet for a possible problem.
Explanation Invalid PTSP packet has been received.
Recommended Action Check the sender of the packet for a possible problem.
Explanation Invalid PTSP packet has been received.
Recommended Action Check the sender of the packet for a possible problem.
Explanation Invalid PTSP packet has been received.
Recommended Action Check the sender of the packet for a possible problem.
Explanation There is no information group inside this PTSE that has the same type as the type in the PTSE header.
Recommended Action Check the sender of the packet for a possible problem.
Explanation Invalid PTSP packet has been received.
Recommended Action Check the sender of the packet for a possible problem.
Explanation Invalid PTSP packet has been received.
Recommended Action Check the sender of the packet for a possible problem.
Explanation Cannot locate node in an ACK packet.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation An internal software error has occurred.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Neighbor indicates that it is a different peergroup. This software version does not support multiple peer groups.
Recommended Action Correct switch address to be part of the same peer group.
Explanation Neighbor indicates that it is a different peergroup. This software version does not support multiple peer groups.
Recommended Action Correct switch address to be part of the same peer group.
Explanation Neighbor indicates that it is a different peergroup. This software version does not support multiple peer groups.
Recommended Action Correct switch address to be part of the same peer group.
Explanation Neighbor indicates that it is a different peergroup. This software version does not support multiple peer groups.
Recommended Action Correct switch address to be part of the same peer group.
Explanation Neighbor indicates that it is a different peergroup. This software version does not support multiple peer groups.
Recommended Action Correct switch address to be part of the same peer group.
Explanation Number of nodes in the network exceeds the node limit of the internal SPF data structure.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Number of nodes in the network exceeds the node limit of the internal SPF data structure.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Number of nodes in the network exceeds the node limit of the internal SPF data structure.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Number of nodes in the network exceeds the node limit of the internal SPF data structure.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Number of nodes in the network exceeds the node limit of the internal SPF data structure.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Number of nodes in the network exceeds the node limit of the internal SPF data structure.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Number of nodes in the network exceeds the node limit of the internal SPF data structure.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Bad request from signaling process error.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation Bad request from signaling process error.
Recommended Action If this message recurs, contact your technical support representative for assistance.
Explanation No more entries in the interface table are allowed. The maximum number of entries is 256.
Recommended Action Do not add anymore entries in the interface table.
Explanation The unit described has a memory error for the IDB structure.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has an initialization timeout failure, cell missequenced ratio.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a spurious IDON interrupt, cell missequenced ratio.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a buffer ownership error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation SONIC send error. Semaphore locked.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation SONIC send error. No free transmit buffers.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation SONIC send error. tp not free.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation SONIC send error. SONICT is still using this tda.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation SONIC send error. TXP did not clear.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation Transmit error.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation SONIC ISR error. Got RBE interface.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Asynchronous Transfer Mode error messages
Explanation The unit described has a memory error for the IDB structure.
Recommended Action If this message occurs, contact your technical support representative for assistance.
Explanation The unit described has a memory error for the ds structure.
Recommended Action If this message occurs, contact your technical support representative for assistance.
The following section provides an alphabetical listing of the LightStream 1010 switch error codes followed by the page number where the description is found.
|
|