|
|
The LightStream 1010 ATM switch processor (ASP) specifications are described in Table B-1.
For the LightStream 1010 ATM switch chassis and common equipment specifications, refer to the appendix "System Chassis Specifications" in the LightStream 1010 ATM Switch Hardware Installation Guide. For port adapter module (PAM) specifications, refer to the appendix "CM and PAM Specifications" in the LightStream 1010 ATM Switch PAM Installation Guide.
| Description | Specifications |
|---|---|
| Switch and processor capacity | 5-Gbps shared memory, nonblocking switch fabric 65,536 cells of ATM cell buffers |
| Software images | Default image with PNNI1 |
| Dimensions (H x W x D) | ASP: 1.2 x 14.4 x 16 in. (3.0 x 36.6 x 40.6 cm) |
| Weight | 6.85 lb (3.09 kg) |
| DC voltages supplied and steady-state maximum current ratings | System: +5V @ 70A +12V @ 2A +24V @ 0.2A ASP: +5V @ 15A +24V @ 25mA +12V @ 500mA |
| Operating temperature | 32 to 104×F (0 to 40×C) |
| Nonoperating temperature | -40 to 167×F (-40 to 75×C) |
| Humidity | 10 to 90%, noncondensing |
| Altitude | -500 to 10,000 ft. (-52 to 3048 m) |
| Microprocessor | 100-MHz MIPS2 R4700 |
| Memory | 8-MB Flash memory SIMM (upgradable to 16 MB) 32-MB DRAM3 default for FC-PCQ4 (upgradable to 64 MB) and 64-MB DRAM default for FC-PFQ5 256-KB boot EPROM6 128-KB SRAM7 No Flash memory (PCMCIA8) card installed by default (accepts 8-, 16-, or 20-MB Intel Series 2+ Flash memory cards) |
| Interface timing | Loop timing, Stratum 4 accuracy clock for self-timing, master clock distribution port |
| Management access | Standard Ethernet and dual EIA/TIA-2329 serial ports on the ASP |
| Connections | 32,000 point-to-point, 2048 multi-to-multipoint VC10 and VP11 switching, VP tunneling PVC12 and SVC13 F4 and F5 OAM14 segment and end-to-end flows, RDI15 and AIS16 OAM PING on IP or ATM address |
| Interface ports | RJ-45 IEEE17 802.3 Ethernet 10BaseT port DB-25 EIA/TIA-232 auxiliary port and a DB-25 console port for an administration workstation |
| Network management | Port TX18 and RX19 LEDs20, switch and common equipment status LEDs Port snooping21 and connection steering Multiple standard and Enterprise MIBs22 Text-based command-line interface based on familiar router interface Standard Cisco IOS security capabilities: password and TACACS,23 Telnet, TFTP24, BOOTP, LAN Emulation client, RFC25 1577 Classical IP over ATM client (for management access) |
| MIBs | SNMP MIB II (RFC 1213) Interface table MIB (RFC 1573) AToM MIB (RFC 1695) ATM Forum PNNI 1.0 MIB ATM Forum UNI 3.0/3.1 ILMI26 4.0 MIB |
| Agency Approvals | Safety: UL27 1950, CSA-C22.228 No. 950, EN60950, IEC95029, TS001 EMI30: FCC Part 15 Class A, Canadian ICES-003 Class A, CE Masking, EN55022 Class A, VCCI Class III, CISPR A with UTP, EN55022 Class B, CISPR Class B, VCCI Class II with shielded cables |
|
|