|
|
This section discusses the objectives, audience, organization, and conventions of this guide. It also contains instructions about how to order additional documentation and how to provide feedback about Cisco documentation.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up to date than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar, select Documentation, and click Enter the feedback form. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
This guide describes how to install, configure, and maintain the LightStream 1010 Asynchronous Transfer Mode (ATM) switch processor (ASP). For your reference, this guide also provides ASP specifications and pinouts.
This guide provides information specific to initial installation and configuration of the switch hardware and software. To use this guide, you should be familiar with electronic circuitry and wiring practices and have experience as an electronic or electromechanical technician.
The major sections of this guide are as follows:
| Chapter/ Appendix | Title | Description |
|---|---|---|
| Chapter 1 | Understanding the ASP | Describes the ASP features and components |
| Chapter 2 | Installing the ASP | Describes safety precautions and how to install the ASP |
| Chapter 3 | Configuring the ASP | Describes the initial configuration of the ASP |
| Chapter 4 | Checking the ASP Installation | Describes the procedures to check the hardware installation and initial configuration of the ASP |
| Appendix A | Maintaining the ASP | Describes the maintenance procedures for the ASP |
| Appendix B | ASP Specifications | Describes the ASP specifications |
| Appendix C | ASP Cable and Port Pinouts | Lists the pinouts for the Ethernet cable connector and the ports on the ASP |
| Appendix D | Translated Safety Warnings | Lists translations of the warnings that appear in this guide |
Command descriptions and screen examples use the following conventions:
| Convention | Description | ||
|---|---|---|---|
| boldface font | Commands and keywords. | ||
| italic font | Variables for which you supply values. | ||
| [ ] | Keywords or arguments that appear within square brackets are optional. | ||
| { x | y | z} | A choice of required keywords appears in braces separated by vertical bars. You must select one. | ||
screen font
| Examples of information displayed on the screen. | ||
boldface screen font
| Examples of information you must enter. | ||
| < > | Nonprinting characters, for example, passwords, appear in angle brackets. | ||
| [ ] | Default responses to system prompts appear in square brackets. | ||
Note | Means reader take note. Notes contain helpful suggestions or references to additional information and material. | ||
| This symbol means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
| ||
| This symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, you must be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. (To see translations of the warnings that appear in this guide, refer to the appendix "Translated Safety Warnings.") | ||
| Waarschuwing Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van standaard maatregelen om ongelukken te voorkomen. (Voor vertalingen van de waarschuwingen die in deze publicatie verschijnen, kunt u het aanhangsel "Translated Safety Warnings" (Vertalingen van veiligheidsvoorschriften) raadplegen.) | |||
| Varoitus Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja tavanomaisista onnettomuuksien ehkäisykeinoista. (Tässä julkaisussa esiintyvien varoitusten käännökset löydät liitteestä "Translated Safety Warnings" (käännetyt turvallisuutta koskevat varoitukset). | |||
| Attention Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant causer des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers posés par les circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour obtenir les traductions des mises en garde figurant dans cette publication, veuillez consulter l'annexe intitulée «Translated Safety Warnings » (Traduction des avis de sécurité). | |||
| Warnung Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu einer Körperverletzung führen könnte. Bevor Sie mit der Arbeit an irgendeinem Gerät beginnen, seien Sie sich der mit elektrischen Stromkreisen verbundenen Gefahren und der Standardpraktiken zur Vermeidung von Unfällen bewußt. (Übersetzungen der in dieser Veröffentlichung enthaltenen Warnhinweise finden Sie im Anhang mit dem Titel "Translated Safety Warnings" (Übersetzung der Warnhinweise).) | |||
| Avvertenza Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di lavorare su qualsiasi apparecchiatura, occorre conoscere i pericoli relativi ai circuiti elettrici ed essere al corrente delle pratiche standard per la prevenzione di incidenti. La traduzione delle avvertenze riportate in questa pubblicazione si trova nell'appendice, "Translated Safety Warnings" (Traduzione delle avvertenze di sicurezza). | |||
| Advarsel Dette varselsymbolet betyr fare. Du befinner deg i en situasjon som kan føre til personskade. Før du utfører arbeid på utstyr, må du vare oppmerksom på de faremomentene som elektriske kretser innebærer, samt gjøre deg kjent med vanlig praksis når det gjelder å unngå ulykker. (Hvis du vil se oversettelser av de advarslene som finnes i denne publikasjonen, kan du se i vedlegget "Translated Safety Warnings" [Oversatte sikkerhetsadvarsler].) | |||
| Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação que lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer equipamento, familiarize-se com os perigos relacionados com circuitos eléctricos, e com quaisquer práticas comuns que possam prevenir possíveis acidentes. (Para ver as traduções dos avisos que constam desta publicação, consulte o apêndice "Translated Safety Warnings" - "Traduções dos Avisos de Segurança"). | |||
| ¡Advertencia! Este símbolo de aviso significa peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considerar los riesgos que entraña la corriente eléctrica y familiarizarse con los procedimientos estándar de prevención de accidentes. (Para ver traducciones de las advertencias que aparecen en esta publicación, consultar el apéndice titulado "Translated Safety Warnings.") | |||
| Varning! Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanligt förfarande för att förebygga skador. (Se förklaringar av de varningar som förekommer i denna publikation i appendix "Translated Safety Warnings" [Översatta säkerhetsvarningar].) |
The ASP is just one component of the LightStream 1010 ATM switch. There are also carrier modules (CMs) and port adapter modules (PAMs), as well as the main chassis. Refer to the following documents for detailed CM, PAM, and chassis hardware installation and configuration information:
Although this document provides some software configuration examples, it does not provide complete software configuration information. Refer to the following publications for complete software configuration information and command syntax:
|
|
@@after@@
@@after@@