For the system chassis and common equipment specifications, refer to the appendix "Chassis Specifications" in the Hardware Installation Guide. For port adapter specifications, refer to the ATM Port Adapter Installation Guide.
Table B-1: Processor Card Specifications
| Description
| Specifications
|
|---|
Processor card capacity
| 5-Gbps shared memory, nonblocking switch fabric
65,536 cells of ATM cell buffers
|
Dimensions (H x W x D)
| 1.2 x 14.4 x 16 in. (3.0 x 36.6 x 40.6 cm)
|
Weight
| 6.85 lb (3.09 kg)
|
DC voltages supplied and steady-state maximum current ratings
| +5V @ 15A
+24V @ 25mA
+12V @ 500mA
|
Operating temperature
| 32 to 104ºF (0 to 40ºC)
|
Nonoperating temperature
| Catalyst 5500: -40 to 158ºF (-40 to 70ºC)
Catalyst 8510 MSR/LightStream 1010: -40 to 167ºF
(-40 to 75ºC)
|
Humidity
| 10 to 90%, noncondensing
|
Altitude
| -500 to 10,000 ft. (-52 to 3048 m)
|
Microprocessor
| 100-MHz MIP1 R4700
|
Memory
| 8-MB Flash memory SIMM (upgradable to 16 MB)
32-MB DRAM2 default for FC-PCQ3 (upgradable to 64 MB) 64-MB DRAM default for FC-PFQ4
256-KB boot EPROM5
128-KB SRAM6
No Flash memory (PCMCIA7) card installed by default (accepts 8-MB, 16-MB, or 20-MB Intel Series 2+ Flash memory cards)
|
Management access
| Standard Ethernet and dual EIA/TIA-2328 serial ports on the processor card
|
Interface ports
| RJ-45 IEEE9 802.3 Ethernet 10BaseT port
DB-25 EIA/TIA-232 auxiliary port and a
DB-25 console port for an administration workstation
|
Agency Approvals
| UL10 1950 (U.S.)
CSA11 950 (Canada)
EN1260950 (European Union)
CE Marking
TUV13 GS (Germany)
IEC14 950 (International)
AS/NZS15 3260 (Australia/New Zealand)
CE Marking
FCC16 Part 15 (CFR 47) Class A
VCCI17 Class A with UTP and Class B with shielded cables (Japan)
EN55022 Class A with UTP and Class B with shielded cables (European Union)
CISPR18 22 Class A with UTP and Class B with shielded cables (International)
AS/NZS 3548 Class A with UTP and class B with shielded cables
|
