Table of Contents
INDEX
- agency approvals
- FCC B-2
- safety B-2
- ASP
- See processor card
- ATM switch processor
- See ASP
- auxiliary port
- described 2-11
- pinouts C-3
- baud rate, console terminal 2-12
- cables
- auxiliary 2-11
- console 2-12
- hazardous 2-3
- pinouts C-1 to C-4
- ungrounded 2-3
- uninsulated 2-3
- captive installation screws, for ESD prevention 2-4
- cell buffers, maximum 64K 1-8
- chassis, dimensions B-1
- connector
- auxiliary port 2-11, C-3
- console port 2-11, C-4
- Ethernet cable 2-10, C-2
- console
- baud rate 2-12
- data bits 2-12
- parity 2-12
- stop bits 2-12
- data bits, console terminal 2-12
- data communications equipment
- See DCE devices
- data terminal equipment
- See DTE devices
- DC voltages B-1
- DCE devices 2-10
- diagnostics
- See troubleshooting
- dimensions, chassis B-1
- direct current
- See DC voltages
- DRAM SIMMs, upgrading A-4
- DTE devices 2-10
- dynamic random-access memory
- See DRAM SIMMs
- Enet (see Ethernet) 1-3
- ESD
- prevention guidelines 2-4
- wrist strap 2-4
- Ethernet
- cable connector pinouts C-2
- port, described 1-3
- RX and TX LEDs 2-19
- fan LEDs 2-18
- FC-PCQ 1-6
- FC-PFQ 1-6
- feature card
- description 1-5
- features 1-6
- maximum switch configuration 1-8
- replacing A-17
- types
- FC-PCQ 1-6
- FC-PFQ 1-6
- Flash memory
- description 1-2
- SIMM, upgrading A-11
- front panel LEDs 2-18
- images, downloading 1-2
- installation
- DRAM SIMMs A-8 to A-10
- feature cards A-21 to A-23
- Flash memory cards (PCMCIA) 2-12 to 2-13
- Flash memory SIMMs A-15 to A-16
- processor card 2-6 to 2-9
- safety
- and electrostatic discharge 2-3
- with electricity 2-2
- LEDs
- fan 2-18
- front panel 2-18
- link 2-18
- processor card 1-3, 2-18
- PS0 2-18
- PS1 2-18
- memory B-2
- See also Flash memory
- upgrading
- DRAM SIMMs A-4
- Flash memory SIMMs A-11
- microprocessor B-1
- MSRP
- See processor card
- multiservice switch route processor
- See MSRP
- network connections
- RJ-45 connectors 2-10, C-2
- serial, illustration 1-4
- operating temperature B-1
- parity, console terminal 2-12
- PCMCIA Flash memory card slots 1-2
- pinouts C-1 to C-4
- ports, on the processor B-2
- power
- emergency switch 2-3
- safety 2-2
- supply, LED 2-18
- ungrounded 2-3
- processor card
- and electrostatic discharge 2-3
- ASP xii, 1-1
- features 1-1
- hot swappable 2-2, A-1
- illustration 1-1
- MSRP xii, 1-1
- receive LED 2-19
- removing
- DRAM SIMMs A-6 to A-8
- feature cards A-18 to A-20
- Flash memory cards (PCMCIA) 2-12 to 2-13
- Flash memory SIMMs A-12 to A-14
- processor A-2 to A-4
- replacing
- See removing
- reset switch 1-3
- signal descriptions
- See pinouts
- SIMMs, upgrading
- DRAM A-4
- Flash memory A-11
- specifications
- altitude B-1
- cabling C-1 to C-4
- chassis dimensions B-1
- DC voltages B-1
- humidity B-1
- memory B-2
- pinouts C-1 to C-4
- ports B-2
- processor B-1
- system capacity B-1
- temperature B-1
- weight B-1
- status LED 2-18
- stop bits, console terminal 2-12
- switch, reset 1-3
- telephone jacks 2-3
- temperature, specifications B-1
- translated safety warnings D-1 to D-6
- transmit LED 2-19
- troubleshooting
- check list 2-15
- diagnostics 2-16
- flowchart 2-16
- weight, chassis B-1
Copyright 1989-1998
©
Cisco Systems Inc.
