|
|
This appendix contains tables that list commands that have been removed from this manual and those that have changed name, as follows:
Refer to the following publications for descriptions of the Cisco IOS commands that are no longer contained in this manual:
| Command Name |
|---|
aaa acounting |
aaa authentication enable default |
aaa authentication login |
aaa authentication ppp |
arp timeout |
banner exec |
banner incoming |
banner motd |
boot bootldr |
boot buffersize |
boot host |
boot network |
buffers |
buffers huge size |
calendar set |
callback |
cdp enable |
cdp run |
chat-script |
clear arp-cache |
clear cdp counters |
clear cdp table |
clear ip route |
clock read-calendar |
clock summer-time |
clock timezone |
clock update-calendar |
cont |
databits |
data-character-bits |
debug ports |
default-name |
default-value exec-character-bits |
default-value special-character-bits |
delete |
dir |
dis |
disconnect |
editing |
enable last-resort |
end |
escape-character |
exec |
exec-banner |
exec-character-bits |
exec-timeout |
flowcontrol |
full-help |
help |
ip default-gateway |
ip domain-list |
ip domain-lookup |
ip domain-name |
ip host |
ip host-routing |
ip mask-reply |
ip name-server |
ip netmask-format |
ip rcmd domain-lookup |
ip rcmd rcp-enable |
ip rcmd remote-host |
ip rcmd rsh-enable |
ip source-route |
ip subnet-zero |
ip tcp async-mobility |
ip tcp selective-ack |
ip tcp timestamp |
ip tcp window-size |
length |
line |
location |
lock |
logging |
logging buffered |
logging facility |
logging monitor |
logging on |
logging synchronous |
logging trap |
login |
login authentication |
logout |
modem answer-timeout |
modem callin |
modem cts-required |
modem dialin |
modem dtr-active |
modem inout |
monitor |
multilink |
notify |
ntp access-group |
ntp authenticate |
ntp authentication-key |
ntp broadcast |
ntp broadcast client |
ntp broadcastdelay |
ntp clock-period |
ntp disable |
ntp master |
ntp max-associations |
ntp peer |
ntp server |
ntp source |
ntp trusted-key |
ntp update-calendar |
padding |
parity |
password |
ppp authentication |
ppp use-tacacs |
pwd |
random-detect |
refuse-message |
script activation |
script connection |
script reset |
script startup |
send |
service config |
service exec-wait |
service finger |
service linenumber |
service nagle |
service password-encryption |
service tcp-keepalives |
service telnet-zeroidle |
service timestamps |
shutdown (controller) |
snmp-server contact |
snmp-server location |
snmp-server packetsize |
snmp-server queue-length |
snmp-server system-shutdown |
snmp-server tftp-server-list |
snmp-server trap-source |
snmp-server trap-timeout |
snmp-server trap-timeout |
special-character-bits |
sscop cc-timer |
sscop idle-timer |
sscop keepalive-timer |
sscop max-cc |
sscop noresponse-timer |
sscop poll-timer |
sscop receive-window |
sscop send-window |
start-character |
start-chat |
stop-character |
systat |
tacacs-server directed-request |
tacacs dns-alias-lookup |
tacacs-server extended |
tacacs-server host |
tacacs-server key |
tacacs-server last-resort |
tacacs-server optional-passwords |
tacacs-server retransmit |
tacacs-server timeout |
terminal-type |
test |
traceroute |
transport |
undebug |
vacant-message |
width |
| Previous Name | New Name |
|---|---|
configure network | copy ftp: system:running-config |
configure overwrite-network | copy ftp: nvram:startup-config |
copy rcp running-config | copy rcp: system:running-config |
copy rcp startup-config | copy rcp: nvram:startup-config |
copy running-config rcp | copy system:running-config rcp: |
copy running-config startup-config | copy system:running-config nvram:startup-config |
copy running-config tftp | copy system:running-config tftp: |
copy tftp running-config | copy tftp:system:running-config |
copy tftp startup-config | copy tftp: nvram:startup-config |
erase startup-config | erase nvram: |
show configuration | show startup-config |
show file | more |
show running-config | |
show startup-config | more nvram:startup-config |
write erase | erase |
copy system:running-config nvram:startup-config | |
write network | copy system:running-config ftp: |
write terminal |
| Previous Name | New Name |
|---|---|
copy erase flash | erase flash: (Class B Flash file systems only) format (Class A and C Flash file systems only) |
copy verify | verify |
copy verify bootflash | verify bootflash: |
copy verify flash | verify flash: |
verify bootflash | verify bootflash: |
verify flash | verify flash: |
| Previous Name | New Name |
|---|---|
copy erase flash | erase flash: (Class B Flash file systems only) format (Class A and C Flash file systems only) |
copy verify | verify flash: |
copy verify bootflash | verify bootflash: |
copy verify flash | verify flash: |
verify bootflash | verify bootflash: |
verify flash | verify |
aaa authentication arap |
aaa authorization |
autoselect |
bandwidth |
clear dialer |
custom-queue-list |
dnsix-dmdp retries |
dnsix-nat authorized-redirection |
dnsix-nat primary |
dnsix-nat secondary |
dnsix-nat source |
ip access-group |
ip classless |
ip domain-lookup nsap |
ip forward-protocol |
ip gdp |
ip helper-address |
ip redirects |
ip route-cache |
ip tcp path-mtu-discovery |
name-conn |
priority-group |
route-map |
router |
rotary |
snmp-server chassis-id |
show dialer |
show dnsix |
show ip cache |
show ip irdp |
show ip local pool |
show ip rpotocols |
show ipc |
show queue |
show queueing |
show route map |
show standby |
transmit-interface |
tunnel |
tx-queue-limit |
Posted: Wed Sep 6 15:27:41 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.