Processor Card Specifications

The processor card specifications are described in Table B-1.

For the system chassis and common equipment specifications, refer to the appendix "Chassis Specifications" in the Hardware Installation Guide. For port adapter specifications, refer to the ATM Port Adapter Installation Guide.

Table B-1: Processor Card Specifications
Description Specifications

Processor card capacity

5-Gbps shared memory, nonblocking switch fabric
65,536 cells of ATM cell buffers

Dimensions (H x W x D)

1.2 x 14.4 x 16 in. (3.0 x 36.6 x 40.6 cm)

Weight

6.85 lb (3.09 kg)

DC voltages supplied and steady-state maximum current ratings

+5V @ 15A
+24V @ 25mA
+12V @ 500mA

Operating temperature

32 to 104ºF (0 to 40ºC)

Nonoperating temperature

Catalyst 5500: -40 to 158ºF (-40 to 70ºC)
Catalyst 8510 MSR/LightStream 1010: -40 to 167ºF
(-40 to 75ºC)

Humidity

10 to 90%, noncondensing

Altitude

-500 to 10,000 ft. (-52 to 3048 m)

Microprocessor

100-MHz MIP¹ R4700

Memory

8-MB Flash memory SIMM (upgradable to 16 MB)
32-MB DRAM² default for FC-PCQ³ (upgradable to 64 MB) 64-MB DRAM default for FC-PFQ⁴
256-KB boot EPROM⁵
128-KB SRAM⁶
No Flash memory (PCMCIA⁷) card installed by default (accepts 8-MB, 16-MB, or 20-MB Intel Series 2+ Flash memory cards)

Management access

Standard Ethernet and dual EIA/TIA-232⁸ serial ports on the processor card

Interface ports

RJ-45 IEEE⁹ 802.3 Ethernet 10BaseT port
DB-25 EIA/TIA-232 auxiliary port and a
DB-25 console port for an administration workstation

Agency Approvals

UL¹⁰ 1950 (U.S.)
CSA¹¹ 950 (Canada)
EN¹²60950 (European Union)
CE Marking
TUV¹³ GS (Germany)
IEC¹⁴ 950 (International)
AS/NZS¹⁵ 3260 (Australia/New Zealand)
CE Marking
FCC¹⁶ Part 15 (CFR 47) Class A
VCCI¹⁷ Class A with UTP and Class B with shielded cables (Japan)
EN55022 Class A with UTP and Class B with shielded cables (European Union)
CISPR¹⁸ 22 Class A with UTP and Class B with shielded cables (International)
AS/NZS 3548 Class A with UTP and class B with shielded cables

¹MIP = MultiChannel Interface Processor.
²DRAM = dynamic random-access memory.
³FC-PCQ = feature card per-class queuing.
⁴FC-PFQ = feature card per-flow queuing.
⁵EPROM = erasable programmable read-only memory.
⁶SRAM = static random-access memory.
⁷PCMCIA = Personal Computer Memory Card International Association.
⁸EIA/TIA = Electronic Industries Association/Telecommunications Industry Association.
⁹IEEE = Institute of Electrical and Electronics Engineers.
¹⁰UL = Underwriters Laboratory.
¹¹CSA = Canadian Standards Association.
¹²EN = European Norm.
¹³TUV = German Test Agency.
¹⁴IEC = International Electrotechnical Commission.
¹⁵AS/NZS Australia/New Zealand Standards
¹⁶FCC = Federal Communications Commission.
¹⁷VCCI = Voluntary Control Council for Interference.
¹⁸CISPR = Comite International Special Des Perturbations Radioelectriques.

Description	Specifications
Processor card capacity	5-Gbps shared memory, nonblocking switch fabric 65,536 cells of ATM cell buffers
Dimensions (H x W x D)	1.2 x 14.4 x 16 in. (3.0 x 36.6 x 40.6 cm)
Weight	6.85 lb (3.09 kg)
DC voltages supplied and steady-state maximum current ratings	+5V @ 15A +24V @ 25mA +12V @ 500mA
Operating temperature	32 to 104ºF (0 to 40ºC)
Nonoperating temperature	Catalyst 5500: -40 to 158ºF (-40 to 70ºC) Catalyst 8510 MSR/LightStream 1010: -40 to 167ºF (-40 to 75ºC)
Humidity	10 to 90%, noncondensing
Altitude	-500 to 10,000 ft. (-52 to 3048 m)
Microprocessor	100-MHz MIP¹ R4700
Memory	8-MB Flash memory SIMM (upgradable to 16 MB) 32-MB DRAM² default for FC-PCQ³ (upgradable to 64 MB) 64-MB DRAM default for FC-PFQ⁴ 256-KB boot EPROM⁵ 128-KB SRAM⁶ No Flash memory (PCMCIA⁷) card installed by default (accepts 8-MB, 16-MB, or 20-MB Intel Series 2+ Flash memory cards)
Management access	Standard Ethernet and dual EIA/TIA-232⁸ serial ports on the processor card
Interface ports	RJ-45 IEEE⁹ 802.3 Ethernet 10BaseT port DB-25 EIA/TIA-232 auxiliary port and a DB-25 console port for an administration workstation
Agency Approvals	UL¹⁰ 1950 (U.S.) CSA¹¹ 950 (Canada) EN¹²60950 (European Union) CE Marking TUV¹³ GS (Germany) IEC¹⁴ 950 (International) AS/NZS¹⁵ 3260 (Australia/New Zealand) CE Marking FCC¹⁶ Part 15 (CFR 47) Class A VCCI¹⁷ Class A with UTP and Class B with shielded cables (Japan) EN55022 Class A with UTP and Class B with shielded cables (European Union) CISPR¹⁸ 22 Class A with UTP and Class B with shielded cables (International) AS/NZS 3548 Class A with UTP and class B with shielded cables

Table of Contents

Processor Card Specifications

Processor Card Specifications