- 155-Mbps and 622-Mbps port adapter
- cabling and 4-15
- CRC errors 4-14, 4-15
- LEDs 4-12
- network diameter 4-14
- 25-Mbps port adapter
- cabling and 4-30
- CRC errors 4-29, 4-30
- LEDs 4-27
- network diameter 4-29
- aaa authorization command 8-4
- ATM
- CLP bit B-2
- GFC field B-2
- HEC field B-2
- NNI, header format B-2
- PT field B-2
- VCI field B-2
- VPI field B-2
- ATM cell structure B-1
- atm ping command 4-5
- ATM switching
- bit rate, checking 4-3
- loopback tests overview 4-6
- port checks 4-1
- baselines 1-3
- basic checks
- network diameter 4-3
- basic port checks, ATM switching 4-1
- break key password recovery 8-6
- broadcast-and-unknown server
- See BUS
- buffers, internal A-7
- BUS 6-2
- cable tester 2-4
- cabling
- 155-Mbps and 622-Mbps port adapter 4-14, 4-15
- 25-Mbps port adapter 4-29, 4-30
- attenuation 2-4
- basic checks 4-3
- cable testers and 2-4
- category 5 4-3, 4-4, 4-14, 4-15, 4-17, 4-19, 4-22, 4-23, 4-26, 4-29, 4-30
- CBR T1 and CBR E1 port adapter 4-26
- cell rate 4-4
- DS3 and E3 port adapter 4-22, 4-23
- NEXT 2-4
- noise 2-4
- T1 and E1 port adapter 4-17, 4-19
- category 5 cabling 4-3, 4-4, 4-14, 4-15, 4-17, 4-19, 4-22, 4-23, 4-26, 4-29, 4-30
- cautions, creating core dumps C-1, C-3
- CBR T1 and CBR E1 port adapter
- CRC errors 4-26
- network diameter 4-26
- troubleshooting 4-24
- CD LED 4-16, 4-20
- cell B-1
- cell rate
- cabling 4-4
- CRC errors 4-3, 4-4
- CHAP, TACACS+ 8-4
- Cisco Connection Documentation CD-ROM D-4
- Cisco TAC D-3
- CLP bit B-2
- commands
- config-register 8-8
- debug atm errors 4-12
- debug atm oam-all 4-12
- debug lane client 6-6
- debug lane client signal interface atm 6-6
- debug lane config 6-7
- debug lane finder 6-7
- debug lane server interface atm 6-7
- debug lane signal interface atm 6-7
- debug ports 4-12
- debug ppp negotiation 8-4
- debug tag-switching adjacency 7-11
- debug tag-switching atm-tdp 7-11
- debug tag-switching packets 7-11
- debug tag-switching tdp 7-11
- debug tag-switching tfib 7-11
- debug tag-switching traffic-eng 7-11
- debug tag-switching tsp-tunnels 7-11
- enable-password 8-7
- exception core-file C-1
- exception dump C-1, C-2
- exception memory C-2
- exception memory fragment C-2
- exception memory minimum C-2
- logging A-5
- make UNIX 8-2
- ping 7-3, A-5
- ping atm interface atm 4-9
- show atm resource A-9
- show atm vp 7-8
- show interface atm 4-13, 4-16, 4-21, 4-25
- show interface loopback 0 7-3
- show ip ospf 7-3
- show lane client 6-3, 6-5
- show lane default atm addresses 6-6
- show logging A-8
- show running-config 7-3, A-5
- show tag interface detail 7-3
- show tag tdp discovery 7-3
- show tag-switching interfaces 7-3
- show tag-switching tdp neighbor 7-7
- show tag-switching tsp-tunnels 7-8
- show tech-support D-1
- terminal monitor A-8
- undebug all 4-12, 6-7
- write core C-2
- config-register command 8-8
- configuration, displaying A-5
- configure command 4-9
- configure terminal command, message logging A-5
- congestion loss priority bit
- See CLP bit
- console line versus terminal lines A-8
- console line, limiting output on A-7
- core dump
- creating C-1
- free memory C-2
- processor memory and C-2
- TFTP server C-1
- CRC errors 4-3
- 155-Mbps and 622-Mbps port adapter 4-14
- 25-Mbps port adapter 4-29, 4-30
- CBR T1 and CBR E1 port adapter 4-26
- DS3 and E3 port adapter 4-22, 4-23
- T1 and E1 port adapter 4-17, 4-19
- CRC errors155-Mbps and 622-Mbps port adapter 4-15
- daemon setup, syslog server A-9
- debug all command A-4
- debug atm errors command 4-12
- debug atm oam-all command 4-12
- debug atm oam-pkt 4-12
- debug atm oam-pkt command 4-12
- debug commands
- caution for use A-2
- cautions 2-2
- disabling 2-2
- disabling all A-4
- enabling all A-4
- entering A-2
- options, displaying A-3
- output
- generating A-4
- redirecting A-5
- sample A-4
- output formats A-1
- output to file A-1
- output, saving A-1
- overhead and A-1
- reducing impact A-1
- using 2-2
- using the no form A-2
- debug lane client command 6-6
- debug lane config command 6-7
- debug lane finder command 6-7
- debug lane server interface atm command 6-7
- debug lane signal interface atm command 6-7
- debug ports 4-12
- debug ppp negotiation command 8-4
- debug status, displaying A-2
- debug tag-switching adjacency command 7-11
- debug tag-switching atm-tdp command 7-11
- debug tag-switching packets command 7-11
- debug tag-switching tdp command 7-11
- debug tag-switching tfib command 7-11
- debug tag-switching traffic-eng command 7-11
- debug tag-switching tsp-tunnels command 7-11
- diagnostic commands
- debug commands 2-2
- overview 2-1
- ping command 2-3
- trace command 2-3
- digital multimeter 2-4
- disable debug commands A-2
- disable debugging activity A-4
- DS3 and E3 port adapter
- cabling and 4-23
- CRC errors 4-22, 4-23
- LEDs 4-20
- network diameter 4-22
- troubleshooting 4-20
- electronic mail, technical support and D-3
- enable all debugging A-4
- enable-password command 8-7
- error messages logging D-2
- e/s 2000002 command 8-7
- /etc/services file 8-2
- exception commands C-1
- exception core-file command C-1
- exception dump command C-1, C-2
- exception memory command C-2
- exception memory fragment command C-2
- exception memory minimum command C-2
- F4 4-6
- F5 4-6
- formats header, ATM NNI B-2
- FTP
- image mode 8-1
- TACACS+ 8-1
- technical support, providing data D-3
- gcc UNIX command 8-2
- generic flow control field
- See GFC field
- GFC field B-2
- halt all debug activity A-4
- header error control
- See HEC field
- HEC field B-2
- host address, setting syslog server A-8
- host problems
- 155-Mbps and 622-Mbps port adapter
- cables 4-14, 4-15
- 25-Mbps port adapter
- cables 4-29, 4-30
- basic checks, cables 4-3
- CBR T1 and CBR E1 port adapter
- cables 4-26
- cell rate cables 4-4
- DS3 and E3 port adapter
- cables 4-22, 4-23
- T1 and E1 port adapter
- cables 4-17, 4-19
- Interface 6-2
- Interim 6-2
- Interim Local Management Interface (ILMI) 6-2
- internal buffer, logging messages to A-7
- IP 1-4
- Kermit protocol D-3
- LAN Emulation
- See LANE
- LAN Emulation server
- See LES
- LANE
- client troubleshooting 6-5
- configuration server (LECS) troubleshooting 6-6
- debugging 6-6
- example network 6-1
- troubleshooting 6-1
- LANE emulation configuration server
- See LECS
- LECS 6-2
- LES 6-2
- logging command A-5, D-2
- logging on command A-6
- loopback tests, ATM switching overview 4-6
- Macintosh, logging router output D-2
- make UNIX command 8-2
- Makefile 8-2
- memory requirements for obtaining a core dump C-2
- message logging
- choosing a destination A-5
- directing to console A-6
- enabling A-6
- keywords and levels A-7
- limiting output on console A-7
- limiting output on terminal lines A-8
- setting levels A-7
- setting trap level A-8
- to internal buffer A-7
- messages, logging D-2
- monitor, logging messages to A-8
- multimeter 2-4
- network analyzer, overview 2-5
- network diameter, 155-Mbps and 622-Mbps port adapter 4-14
- network diameter, 25-Mbps port adapter 4-29
- network diameter, basic checks 4-3
- network diameter, CBR T1 and CBR E1 port adapter 4-26
- network diameter, DS3 and E3 port adapter 4-22
- network diameter, T1 and E1 port adapter 4-18
- network element (NE) 4-6
- network map 1-3
- network monitor 2-4
- network traffic
- debug priority over A-4
- generating with ping command A-5
- Network-Node Interface
- See NNI
- NNI, header format B-2
- no debug all command 2-2
- no debug command 2-2
- OAM 4-6
- Open Shortest Path First
- See OSPF
- optical time domain reflectometer
- See OTDR
- options to debug command, displaying A-3
- o/r command 8-7
- OSPF 7-1
- OTDR 2-4
- output from debug
- caution using A-4
- generating A-4
- redirect using command options A-5
- setting message levels A-7
- terminal lines versus console lines A-8
- PAP, TACACS+ 8-4
- password recovery
- flowchart 8-6
- overview 8-5
- payload type field
- See PT field
- PC, logging router output D-2
- performance
- debug commands and 2-2
- network monitors and 2-4
- ping atm command 4-5
- ping atm interface atm command 4-9
- ping command 7-3
- ICMP and 2-3
- IP version 2-3
- using 2-3
- ping command, using to generate network traffic A-5
- port checks, ATM switching 4-1
- ports, ATM, basic port check 4-1
- PPP, TACACS+ 8-4
- problems, troubleshooting 1-1
- problem-solving model, troubleshooting 1-1
- PT field B-2
- RDI 4-6
- receive LED 4-12, 4-16, 4-20, 4-24
- recovering passwords
- See password recovery
- remote defect indication
- See RDI
- remote terminal, logging router output D-2
- router
- crash
- core dump and C-1
- processor memory and C-2
- diagnostic commands
- debug commands 2-2
- overview 2-1
- ping command 2-3
- trace command 2-3
- router configuration, displaying A-5
- script UNIX command D-2
- security 8-1
- server
- FTP server C-1, C-3
- rcp server C-1, C-3
- syslog server D-2
- TACACS+ server 8-4
- setting message logging trap level A-8
- show atm resource command A-9
- show atm vc interface atm command 5-50
- show atm vp command 7-8
- show commands, common 2-2
- show interface loopback 0 command 7-3
- show ip ospf command 7-3
- show lane client command 6-3, 6-5
- show lane default atm addresses command 6-6
- show logging command A-8
- show port port-number all command 4-2
- show running-config command 7-3, A-5
- show tag interface detail command 7-3
- show tag tdp discovery command 7-3
- show tag-switching interfaces command 7-3
- show tag-switching tdp neighbor command 7-7
- show tag-switching tsp-tunnels command 7-8
- show tech-support command D-1
- solutions, troubleshooting 1-1
- support, technical
- See technical support
- symptoms
- defining 1-2
- troubleshooting 1-1
- syslog server A-8, A-9
- logging troubleshooting information D-2
- system diagnostics, enabling all A-4
- T1 and E1 port adapter
- cabling and 4-19
- CRC errors 4-17, 4-19
- LEDs 4-16
- network diameter 4-18
- TAC D-3
- TACACS+
- CHAP 8-4
- compiling daemon 8-2
- configuration file
- CHAP 8-4
- converting password file to 8-3
- missing 8-3
- daemon
- compiling 8-2
- launching 8-2
- tac_plus executable 8-2
- disk space 8-1
- /etc/passwd file 8-5
- /etc/services file 8-2
- FTP 8-1
- gcc UNIX command 8-2
- launching 8-2
- make UNIX command 8-2
- Makefile 8-2
- PAP 8-4
- password file, converting to configuration file 8-3
- PPP 8-4
- problems
- aaa authorization command present 8-4
- archive not transferred in image mode 8-1
- CHAP misconfigured 8-4
- daemon not launched 8-2
- FTP misconfiguration 8-1
- gcc not in $PATH 8-2
- insufficient disk space 8-1
- make not in $PATH 8-2
- no TCP connection to daemon 8-5
- PAP misconfigured 8-4
- platform not in Makefile 8-2
- PPP not functioning correctly 8-4
- router misconfigured 8-4
- tac_plus executable does not exist 8-2
- TACACS+ configuration file missing 8-3
- TACACS+ not in /etc/services 8-2
- username/password not in /etc/passwd 8-5
- symptoms
- authentication fails 8-3
- cannot compile daemon 8-2
- daemon does not run 8-3
- daemon not up and running 8-2
- errors unarchiving source file 8-1
- no Username prompt 8-3
- users cannot login 8-3
- tac_plus executable 8-2
- TCP connection to daemon 8-5
- Tag Distribution Protocol
- See TDP
- Tag Switching
- debugging 7-11
- example 7-2
- initial troubleshooting 7-3
- overview 7-1
- TDP neighbor troublshooting 7-7
- VP tunnel troubleshooting 7-8
- TCP/IP
- See IP
- TDP neighbor troublshooting 7-7
- Technical Assistance Center (TAC) D-3
- technical support
- Cisco TAC D-3
- gathering data for D-1 to D-2
- providing data D-3
- show tech-support command D-1
- terminal, logging router output D-2
- terminal monitor command A-8
- third-party troubleshooting tools
- cable tester 2-4
- fiber cable tester 2-4
- multimeter 2-4
- network monitor 2-4
- OTDR 2-4
- protocol analyzer 2-5
- TDR 2-4
- volt-ohm meter 2-4
- trace command
- port unreachable message 2-3
- time exceeded message and 2-3
- TTL 2-3
- using 2-3
- transmit LED 4-12, 4-16, 4-20, 4-24, 4-27
- trap level A-8
- troubleshooting
- action plan 1-2
- baselines and 1-3
- gathering facts 1-2
- internetwork map 1-3
- preventative measures 1-3
- problems 1-1
- problem-solving model 1-1
- solutions 1-1
- symptoms
- defining 1-2
- description 1-1
- third-party tools
- cable tester 2-4
- fiber cable tester 2-4
- multimeter 2-4
- network monitor 2-4
- OTDR 2-4
- protocol analyzer 2-5
- TDR 2-4
- volt-ohm meter 2-4
- undebug all command 4-12, 6-7
- UNIX
- gcc command 8-2
- logging router output D-2
- UNIX syslog server A-8, A-9
- VCI field B-2
- virtual channel identifier field
- See VCI field
- virtual path identifier field
- See VPI field
- volt-ohm meter 2-4
- VP tunnel troubleshooting 7-8
- VPI field B-2
- write core command C-2
Copyright 1989-1999
©
Cisco Systems Inc.
