cc/td/doc/product/atm/ls1010s/wa4/11_2_8
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

ASP Specifications

ASP Specifications

The LightStream  1010 ATM switch processor (ASP) specifications are described in Table B-1.

For the LightStream  1010 ATM switch chassis and common equipment specifications, refer to the appendix "System Chassis Specifications" in the LightStream  1010 ATM Switch Hardware Installation Guide. For port adapter module (PAM) specifications, refer to the appendix "CM and PAM Specifications" in the LightStream  1010 ATM Switch PAM Installation Guide.


Table B-1: ASP Specifications
Description Specifications

Switch and processor capacity

5-Gbps shared memory, nonblocking switch fabric
65,536 cells of ATM cell buffers

Software images

Default image with PNNI1

Dimensions (H x W x D)

ASP: 1.2 x 14.4 x 16 in. (3.0 x 36.6 x 40.6 cm)

Weight

6.85 lb (3.09 kg)

DC voltages supplied and  steady-state maximum current ratings

System:  +5V @ 70A
                           +12V @ 2A
                           +24V @ 0.2A
ASP:            +5V @ 15A
                           +24V @ 25mA
                         +12V @ 500mA

Operating temperature

32 to 104ºF (0 to 40ºC)

Nonoperating temperature

-40 to 167ºF (-40 to 75ºC)

Humidity

10 to 90%, noncondensing

Altitude

-500 to 10,000 ft. (-52 to 3048 m)

Microprocessor

100-MHz MIPS2 R4700

Memory

8-MB Flash memory SIMM (upgradable to 16 MB)
32-MB DRAM3 default for FC-PCQ4 (upgradable to 64 MB) and 64-MB DRAM
       default for FC-PFQ5
256-KB boot EPROM6
128-KB SRAM7
No Flash memory (PCMCIA8) card installed by default (accepts 8-, 16-, or 20-MB Intel Series  2+ Flash memory cards)

Interface timing

Loop timing, Stratum 4 accuracy clock for self-timing, master clock distribution port

Management access

Standard Ethernet and dual EIA/TIA-2329 serial ports on the ASP

Connections

32,000 point-to-point, 2048 multi-to-multipoint
VC10 and VP11 switching, VP tunneling
PVC12 and SVC13
F4 and F5 OAM14 segment and end-to-end flows, RDI15 and AIS16
OAM PING on IP or ATM address

Interface ports

RJ-45 IEEE17 802.3 Ethernet 10BaseT port
     DB-25 EIA/TIA-232 auxiliary port and a
     DB-25 console port for an administration workstation

Network management

Port TX18 and RX19 LEDs20, switch and common equipment status LEDs
Port snooping21 and connection steering
Multiple standard and Enterprise MIBs22
Text-based command-line interface based on familiar router interface
Standard Cisco IOS security capabilities: password and TACACS,23
Telnet, TFTP24, BOOTP, LAN Emulation client, RFC25 1577 Classical IP over
       ATM client (for management access)

MIBs

SNMP MIB II (RFC 1213)
Interface table MIB (RFC 1573)
AToM MIB (RFC 1695)
ATM Forum PNNI 1.0 MIB
ATM Forum UNI 3.0/3.1 ILMI26 4.0 MIB

Agency Approvals

Safety: UL27 1950, CSA-C22.228 No. 950, EN60950, IEC95029, TS001
EMI30: FCC Part 15 Class A, Canadian ICES-003 Class A, CE Masking, EN55022 Class A, VCCI Class III, CISPR A with UTP, EN55022 Class B, CISPR Class B, VCCI Class II with shielded cables

1PNNI = Private Network-Network Interface.
2
MIPS = MultiChannel Interface Processor.
3DRAM = dynamic random-access memory.
4FC-PCQ = feature card per-class queueing.
5FC-PFQ = feature card per-flow queueing.
6EPROM = erasable programmable read-only memory.
7SRAM = static random-access memory.
8PCMCIA = Personal Computer Memory Card International Association.
9EIA/TIA = Electronic Industries Association/Telecommunications Industry Association.
10VC = virtual channel.
11VP = virtual path.
12PVC = permanent virtual circuit.
13SVC = switched virtual circuit.
14OAM = Operations, Administration, and Maintenance.
15RDI = remote defect identification.
16AIS = alarm indication signal.
17IEEE = Institute of Electrical and Electronics Engineers.
18TX = transmit.
19RX = receive.
20LEDs = light emitting diodes.
21FC-PFQ supports per-VC, per-VP, and per-port snooping.
22MIBs = Management Information Bases.
23TACACS = Terminal Access Control Access System.
24TFTP = Trivial File Transfer Protocol.
25RFC = Request For Comments.
26ILMI = Interim Local Management Interface.
27
UL = Underwriters Laboratory.
28CSA = Canadian Standards Association.
29IEC = International Electrotechnical Commission.
30EMI = electromagnetic interference.


hometocprevnextglossaryfeedbacksearchhelp
Copyright 1989-1998 © Cisco Systems Inc.