Table of Contents
Q Commands
The commands shown in this chapter apply to the Catalyst 8540 MSR, Catalyst 8510 MSR, and LightStream 1010. Where an entire command or certain attributes of a command have values specific to a particular switch, an exception is indicated by the following callouts:
- Catalyst 8540 MSR
- Catalyst 8510 MSR and LightStream 1010
Note Commands that are identical to those documented in the Cisco IOS software documentation have been removed from this chapter. Refer to Appendix D, "Removed and Changed Commands," of this command reference for a list of removed commands.
Note This command or some of its parameters might not function as expected.
Posted: Fri Feb 18 07:10:51 PST 2000
Copyright 1989 - 2000©Cisco Systems Inc.
