INDEX

Symbols

Numerics

INDEX

Symbols

# (pound sign)

: in a prompt 2-5

* (asterisk)

: as wildcard 13-4

> (angle bracket)

: in a prompt 2-4

(ellipsis)

: as wildcard 13-4

Numerics

155 Mbps

: default configuration 17-3
: interface configuration 17-4
: SM, MM, UTP interface configuration 17-3

25 Mbps

: default configuration 17-2
: interface configuration 17-2

622 Mbps

: default configuration 17-7
: interface configuration 17-6

A

aaa accounting command 4-13

aaa new-model command 4-13

AAA/TACACS+

: description 4-11

abbreviations

: of commands 2-2

ABR

: configuring limits of best-effort connections 8-30

access control

: inbound 11-10
: IP 11-10
: list 11-1
: outbound 11-10
: using 11-1

access filter 9-3

access lists

: See IP access lists

access-class command 11-10

access-list command 11-9

accounting file configuration mode

: See ATM accounting file configuration mode

accounting selection configuration mode

: See ATM accounting selection configuration mode

addressing schemes

: ATM 3-5, 9-2
: ATM switch router chassis, table (Catalyst 8540 MSR) 2-6
: autoconfigured ATM 3-5
: hierarchical model of 3-5
: See also ATM address

administrative interface

: configuring 3-31

administrative-weight command 10-40

AESA 9-3

age-timer command 16-15

aggregation-mode command 10-46

AIS

: DS3 and E3 17-9
: enabling on interface, example 6-4
: enabling, example (Catalyst 8510 MSR and LightStream 1010) 6-3
: enabling, example (Catalyst 8540 MSR) 6-3
: T1 and E1 17-11, 17-12

alarm indication signals

: See AIS

ARP 9-1

ASP

: ATM switch processor 1-2

ATM

: configuring inverse ARP in PVC environment 12-5

atm abr-mode command (Catalyst 8510 MSR and LightStream 1010) 8-9

atm access-group command 11-6

ATM accounting

: configuring 14-1
: file configuration mode 14-7
: selection configuration mode 14-5
: SNMP traps 14-9

atm accounting collection command 14-8

atm accounting command 14-4

atm accounting enable command 14-3

atm accounting file command 14-7, 14-12

: entering command mode with 2-11

ATM accounting file configuration mode

: description 2-11
: table 2-3

atm accounting selection command 14-5

: entering command mode with 2-11

ATM accounting selection configuration mode

: description 2-11
: table 2-3

atm accounting trap threshold command 14-10

ATM address

: autoconfigured 3-5
: changing active 10-6
: configuration prerequisites 3-2
: configuring 3-5, 9-2
: LANE, MAC address and ESI field 13-3
: manual configuration 3-5
: testing correct configuration 3-36
: uniqueness rule, note 3-5
: wildcards in LANE templates 13-4

atm address command 9-2, 10-6, 10-10

ATM address prefix

: as ping destination (Catalyst 8510 MSR and LightStream 1010) 6-5

atm address-registration command 9-6

atm address-registration permit command 11-12

atm arp-server nsap command 12-3

atm arp-server time-out command 12-4

atm auto-configuration command 9-6

atm cac best-effort configuration 8-30

atm cac best-effort-limit command 8-30

atm cac link-sharing command 8-25

atm cac max-peak-cell-rate command 8-32

atm cac service-category command 8-37

ATM connection

: checking reachability (Catalyst 8510 MSR and LightStream 1010) 6-5
: checking reachability (Catalyst 8540 MSR) 6-4
: testing configuration 3-37

atm connection-traffic-table-row command 7-11, 7-13, 7-16, 8-12

ATM E.164 translation table configuration mode

: description 2-12
: table 2-4

atm e164 address command 16-7

atm e164 auto-conversion command 16-11

atm e164 translation command 16-13

atm e164 translation-table command 16-13

: entering command mode with 2-12

ATM end system address

: See AESA

atm esi-address command 12-3, 12-4

atm filter-expr command 11-5

atm filter-set command 11-3

atm hierarchical-tunnel command 7-16

atm iisp command 7-9

atm ilmi default-access permit command 9-3

atm ilmi-keepalive command 9-6

ATM interface

: configuring, examples 15-5
: displaying configuration 15-5
: displaying tag switching configuration, example 15-5
: enabling tag switching on 15-4
: testing configuration 3-37
: testing status of 3-38

atm lecs-address command 9-4, 13-15

atm lecs-address-default command 13-9

atm link-distance command 8-29

atm manual-well-known-vc command 5-26

atm maxvci-bits command 17-4, 17-7, 17-10, 17-12

atm maxvpi-bits command 17-3, 17-4, 17-6, 17-7, 17-10, 17-12

atm nni command 7-6, 7-7

atm nsap-address command 12-3, 12-4, 12-9

atm oam command 6-4

atm oam command (Catalyst 8510 MSR and LightStream 1010) 6-3

atm oam command (Catalyst 8540 MSR) 6-3

atm output-queue command (Catalyst 8510 MSR and LightStream 1010) 8-19

atm output-threshold command (Catalyst 8510 MSR and LightStream 1010) 8-21

atm over-subscription-factor command (Catalyst 8510 MSR and LightStream 1010) 8-7

atm pacing command 8-23

atm pnni admin-weight command 10-41

atm pnni aggregation-token command 10-44

atm pnni explicit-path command 10-36

atm pnni link-selection command 10-32

atm prefix command 9-7

atm pvc command 5-3, 5-6, 5-10, 5-26, 7-19, 12-7

atm pvc encap aal5snap command 12-6

atm pvp command 5-8, 7-11, 7-14, 7-16, 15-9, 15-11

atm qos command 8-6

atm rmon collect command 14-15

atm rmon enable command 14-16

atm rmon portselgrp command 14-14

atm route command 3-23, 10-7, 10-11, 12-3, 12-4, 16-6, 16-11

atm route prefix command 7-9

atm route-optimization command 5-23

ATM router configuration mode

: description 2-10
: table 2-3

atm router pnni command

: aggregation mode 10-46
: background route computation 10-29
: complex node representation 10-49
: configure ATM Address and PNNI node level 10-10
: entering command mode with 2-10
: global administrative weight 10-39
: hello, database sync, and flooding 10-50
: logical group node and peer group ID 10-16
: maximum administrative weight percentage 10-33
: node election leadership priority 10-20
: node name 10-18
: parent node 10-19
: precedence 10-34
: redistribution 10-43
: scope mapping 10-15
: significant change threshold 10-47
: statistics collection 10-53
: summary address 10-13, 10-22
: transmit restriction 10-42

atm routing-mode static command 10-4

atm service-category-limit command (Catalyst 8510 MSR and LightStream 1010) 8-8

atm service-class command 15-15

atm signalling cug access command 16-23

atm signalling cug alias command 16-22

atm signalling cug assign command 16-23

atm signalling diagnostics command 16-15

: entering command mode with 2-13

ATM signalling diagnostics configuration mode

: description 2-13
: table 2-4

atm signalling diagnostics enable command 16-15

atm signalling ie forward command 16-1

atm signalling vpci command 7-18

atm snoop interface atm command 5-30

atm snoop-vc command 5-31

atm snoop-vp command 5-31

atm soft-vc command 5-16

atm soft-vp command 5-20

atm sustained-cell-rate-margin-factor command 8-13

atm svcc vci min command 7-21

atm svcc vpi max command 7-21

atm svc-frame-discard-on-aal5ie command 16-3

atm svpc vpi max command 7-21

ATM switch

: configuration methods 3-1
: connection characteristics (Catalyst 8540 MSR) 1-4
: overview (Catalyst 8540 MSR) 1-1
: overview (LightStream 1010 and Catalyst 8510 MSR) 1-2
: self-configuring features 1-4
: support for port adapters 1-3

ATM switch hardware

: functions performed on OAM cells 6-2

ATM switch processor

: See ASP

ATM switch router (Catalyst 8540 MSR

: system availability) 1-4

ATM switch router (Catalyst 8540 MSR)

: hardware components on 1-2
: modular chassis for 1-2

ATM switch router (Catalyst 8540)

: modular chassis for 1-1

atm template-alias command 11-2

atm threshold-group command 8-16, 8-17

atm uni command 7-4, 17-3, 17-4, 17-6, 17-7, 17-9, 17-12

atm uni type command 17-3

ATM VP tunnels

: configuring 7-12

atm0 interface

: note 3-8

authentication

: dynamic 11-9

autoconfiguration 7-2

auto-ferf command 17-10, 17-12

auto-summary command 10-13, 10-22

B

background-routes-enable command 10-29

best-effort connections

: configuring limits 8-30
: displaying configuration 8-31

BOOTP server

: configuration prerequisites 3-2
: configuring 3-3

buffers command 4-2

C

cablelength command 19-4

calendar set command 4-11

called-address-mask command 16-16

called-nsap-address command 16-15

calling-nsap-address command 16-16

carrier modules

: documentation xxiii

CAS

: CES framing formats
: not used with CES 18-18
: not used with soft PVC 18-20
: used with CES and on-hook detection 18-33
: used with soft PVC 18-25

cast-type command 16-16

CBR

: atm connection-traffic-table-row command 8-12
: atm output-queue command 8-19
: CAC parameter to bandwidth relationship 8-25
: CTT row default 8-12
: equation 8-7
: FC-PCQ and FC-PFQ feature comparison (Catalyst 8510 MSR and LightStream 1010) 8-4
: interface output discard threshold 8-21
: interface output pacing 8-23
: interface queue thresholds per service category (Catalyst 8510 MSR and LightStream 1010) 8-21
: interface type default 8-7
: output queue maximum 8-19
: service category limit (Catalyst 8510 MSR and LightStream 1010) 8-8
: switch processor features (Catalyst 8540 MSR) 8-3

CBR traffic

: network clock services for 3-23

CCO

: information and services availability xxiii

cdp command 4-2

CDS3 FR controllers

: changing default cable lengths, example 19-4
: displaying configuration 19-5
: displaying serial information, example 19-6

CDS3 FR port adapters

: configuring 19-3
: default configuration 19-3

CDVT

: configuring ATM default 8-33
: displaying configuration 8-34

CE1 FR controllers

: changing default yellow alarms, example 19-9
: displaying configuration, example 19-9

CE1 FR port adapters

: defaults 19-8

cell delay variation tolerance

: See CDVT

cell flows

: on demand or periodic, note 6-2
: support for 6-1

cell-payload scrambling

: disabling 3-6

ces aal1 clock command 18-4, 18-9, 18-10, 18-13, 18-18, 18-21, 18-30

ces aal1 service command 18-4

ces aal1 service structured command 18-18, 18-21, 18-29, 18-36

ces aal1 service unstructured command 18-8, 18-13

ces circuit 0 cdv command 18-4

ces circuit 0 circuit-name command 18-9, 18-13

ces circuit 0 shutdown command 18-10

ces circuit command 18-14, 18-19, 18-22, 18-23, 18-26, 18-29, 18-30, 18-31, 18-33, 18-36

ces circuit shutdown command 18-22

CES circuits

: configuring SGCP 18-35

ces dsx1 clock source command 18-4, 18-10, 18-13, 18-18, 18-29

ces dsx1 framing command 18-4, 18-18, 18-21, 18-29

ces dsx1 lbo command 18-4, 18-5

ces dsx1 linecode command 18-4, 18-5, 18-18, 18-21, 18-29

ces dsx1 loopback command 18-4

ces dsx1 signalmode robbedbit command 18-26

CES E1

: default 18-3
: interface configuration 18-1, 18-3

CES operations

: network clock services for 3-23

ces pvc 0 dest-address command 18-4, 18-14, 18-31

ces pvc 0 interface ATM command 18-9, 18-19, 18-23

CES T1

: default 18-3
: interface configuration 18-1, 18-3

CES/T1 and CES/E1 (Catalyst 8510 MSR and LightStream 1010) 18-2

CES/T1 and CES/E1 (Catalyst 8540 MSR) 18-2

CES-IWF 18-2

channel associated signalling

: See CAS

channel-group command 19-5, 19-9

channelized DS3 Frame Relay port adapters

: See CDS3 FR port adapters

circuit emulation services interworking function

: See CES-IWF

circuit emulation services operation

: See CES operations

Cisco Connection Online

: See CCO

class mappings into service classes, table 15-14

clear cdp command 4-3

clear-cause command 16-16

client-atm-address command 13-12

clock command 4-11

clock module

: on the route processor 1-1

clock set command 3-23

clock source command 3-10, 17-4, 17-6, 17-7, 17-10, 17-12, 19-4, 19-9

closed user group

: See CUG

collection-modes command 14-7

command modes

: ATM accounting file configuration 2-11
: ATM accounting selection configuration 2-11
: ATM E.164 translation table configuration 2-12
: ATM router configuration 2-10
: ATM signalling diagnostics configuration 2-13
: controller configuration 2-13
: interface configuration 2-6
: LANE configuration server database configuration 2-12
: line configuration (Catalyst 8510 MSR and LightStream 1010) 2-8
: line configuration (Catalyst 8540 MSR) 2-8
: map-class configuration 2-9
: map-list configuration 2-9
: PNNI node configuration 2-10
: privileged EXEC 2-5
: redundancy configuration 2-14
: subinterface configuration 2-7
: summary, table 2-2, 2-4
: user EXEC 2-4

commands

: abbreviating 2-2
: atm pnni explicit-path 10-36
: exclude-node 10-36
: ncdp 3-16
: ncdp max-diameter 3-16
: ncdp revertive 3-16
: ncdp source priority 3-16
: next-node 10-36
: show atm pnni topology node 10-37
: show atm vc interface 5-18
: show ncdp path root 3-17
: show ncdp sources 3-17
: show ncdp status 3-17
: show ncdp timers 3-17
: syntax in documentation xxii
: using no to disable features or functions 2-2

configuration

: CES E1 interface 18-3

configuration register

: testing installation 3-34

configurations

: storing 3-31
: testing 3-40
: testing NVRAM 3-41

configure command

: entering command mode with 2-5

configuring

: 155 Mbps ATM default interface 17-4
: 155 Mbps ATM interface 17-4
: 622 Mbps ATM interface 17-6, 17-7
: 622 Mbps default configuration 17-7
: CES E1 default interface 18-3
: CES E1 interface 18-1
: CES T1 default interface 18-3
: CES T1 interface 18-1, 18-3
: DS3 and E3 interface 17-8
: DS3/E3 ATM interface 17-9
: DS3/E3 default interface 17-9
: E1 ATM default interface 17-11
: E1 ATM interface 17-11
: E1 Frame Relay interface 19-7
: E1 trunk interface 17-10
: IISP interfaces 7-9
: interface snooping 5-30
: methods of 3-1
: OC-3c default interface 17-5
: OC-3c interface 17-5
: prerequisites for 3-2
: T1 ATM default interface 17-11
: T1 ATM interface 17-11
: T1 trunk interface 17-10
: terminal lines and modem support (Catalyst 8510 MSR and LightStream 1010) 4-2
: terminal lines and modem support (Catalyst 8540 MSR) 4-1
: troubleshooting interface 17-13

configuring CDS3 Frame Relay interface 19-3

connecting point

: in ATM switches 6-2

connection traffic table

: See CTT

connection-category command 16-16

connection-traffic-table-rows

: See CTTRs

connection-types command 14-5

connectivity

: checking (Catalyst 8510 MSR and LightStream 1010) 4-15
: checking (Catalyst 8540 MSR) 4-15

constant bit rate

: See CBR

constant bit rate traffic

: See CBR traffic

controlled link sharing

: configuring 8-24
: displaying configuration 8-25
: minimum and maximum parameter relationships, table 8-25

controller command

: entering command mode with 2-13

controller configuration mode

: description 2-13

controller configuration mode (Catalyst 8510 MSR and LightStream 1010)

: table 2-4

controller e1 command

: CE1 interface (Catalyst 8510 MSR and LightStream 1010) 19-9
: channel group 19-9

controller T3 command 19-4

CTT

: configuring (Catalyst 8510 MSR and LightStream 1010) 8-10
: configuring (Catalyst 8540 MSR) 8-10
: configuring for Frame Relay/ATM Interworking 19-17
: displaying configuration 8-13
: Frame Relay/ATM Interworking, table 19-17
: management 8-1, 8-2
: row allocations and defaults 8-11

CTTRs

: restrictions 7-19

CUG 16-19

: IC IE 16-19
: signalling overview 16-19

D

DACS 18-17

default command 14-5, 14-7

default connections

: number in OAM configured connections (Catalyst 8510 MSR and LightStream 1010) 6-3
: number in OAM configured connections (Catalyst 8540 MSR) 6-3

default name command 13-12

default QoS objective tables

: configuring 8-5
: description (Catalyst 8510 MSR and LightStream 1010) 8-2
: description (Catalyst 8540 MSR) 8-1
: displaying 8-6

default-name command 13-10, 13-11

description command 14-7

digital access and crossconnect system

: See DACS

disabling 7-2

: autoconfiguration 7-2
: signalling 16-25

discard functions

: of ATM switch hardware 6-2

documentation

: conventions used in xxi
: for carrier modules xxiii
: meaning of cautions used in xxii
: meaning of notes in xxii
: of command syntax xxii
: on CD-ROM xix

DS3 and E3

: configuration 17-9
: interface configuration 17-8

E

E.164

: addresses 16-4
: autoconversion feature 16-5
: gateway feature 16-5
: one-to-one translation table 16-5, 16-12

E1 ATM default interface

: configuring 17-11

E1 channels

: configuring, example 19-9

E1 Frame Relay interface

: configuring 19-7

e164 address command 16-13

edge switches

: description 14-2

EHSA

: configuring switch processor 3-30
: description 3-24
: displaying configuration of switch processors 3-30
: establishing spare switch processor 3-30
: switching configurations 3-29

election leadership-priority command 10-20

emulated LANs

adding restricted membership

: database entries for clients 13-12

configuring restricted membership database entries for all clients 13-11

database for unrestricted membership 13-10

restricted membership 13-11

restricted membership database 13-11

enable command

: atm accounting 14-7
: entering privileged EXEC mode with 2-5

encapsulation

: of Frame Relay on interface 19-10

encapsulation frame-relay command 19-10

end-to-end loopback

: enabling on interface, example 6-4

erase startup-config command

: configuration files cleared with 3-3

ESI field 13-3

Ethernet

: testing connectivity 3-37

Ethernet interface

: configuring IP 12-1
: configuring LAN emulation 13-1
: testing configuration 3-36

Ethernet ports

: configuring IP address 3-7

ethernet0 interface

: configuring 3-8
: note 3-8

exclude-node command 10-36

EXEC command mode

: note 2-1
: user level description 2-4

EXEC commands

: privileged level 2-5

Extended High System Availability

: See EHSA

extended system availability 3-24

F

F4 flows

: reporting unavailable or not guaranteed paths 6-1

F5 flows

: reporting degraded VC performance 6-1

failed-attempts command 14-7

fault management functions

: in OAM, note 6-1

fault resistance

: of ATM switch router (Catalyst 8540 MSR) 1-4

fault tolerance

: simple server redundancy 13-3

FC-PCQ (Catalyst 8510 MSR and LightStream 1010) 8-3

: ASP-B with 1-3
: ASP-C with 1-3
: features 8-2

FC-PFQ (Catalyst 8510 MSR and LightStream 1010) 8-3

: features 8-2

feature card per-class queuing

: See FC-PCQ

feature card per-flow queuing

: See FC-PFQ

feature card types (Catalyst 8510 MSR and LightStream 1010)

: FC-PCQ 8-3
: FC-PFQ 8-3

features

: ATM addressing and plug-and-play operation 1-4

frame discard 16-2

Frame Relay commands

: frame-relay intf-type command 19-11
: frame-relay lmi-n391dte command 19-14
: frame-relay lmi-n392dce command 19-14
: frame-relay lmi-n393dce command 19-14
: frame-relay lmi-n393dte command 19-14
: frame-relay lmi-type command 19-12
: frame-relay pvc command 19-21
: frame-relay pvc dlci command 19-23, 19-25
: frame-relay soft-vc dlci command 19-28

Frame Relay encapsulation

: displaying on serial interface, example 19-11
: enabling on interface 19-10

Frame Relay serial interface

: configuring 19-11
: configuring type NNI, example 19-11
: displaying configuration 19-12
: displaying configuration for interface with Cisco LMI enabled, example 19-15
: displaying resource information, example 19-19

Frame Relay soft PVC

: route optimization 19-34

Frame Relay/ ATM interworking

: configuring service internetworking PVCs 19-24

Frame Relay/ATM Interworking

: configuring CTT row, example 19-17
: configuring interface tasks 19-18
: configuring resource management 19-18
: configuring soft PVC connections 19-26
: configuring the CTT 19-17
: default CTT rows, table 19-17
: guidelines for soft PVC connections 19-26
: Network IWF, figure 19-2
: overview 19-1
: Service IWF, figure 19-2

frame-relay accept-overflow command 19-18

frame-relay bc-default command 19-18

frame-relay input-queue command 19-18

frame-relay output-queue command 19-18

frame-relay overbooking command 19-18

frame-relay pvc command 19-21

frame-relay pvc dlci command 19-23, 19-25, 19-26

frame-relay soft-vc dlci command 19-28, 19-30, 19-32

framing command 17-10, 17-12, 19-4

functional image

: loading (Catalyst 8540 MSR) 20-5
: loading (LightStream 1010 and Catalyst 8510 MSR) 20-8
: maintenance (Catalyst 8540 MSR) 20-5
: maintenance (LightStream 1010 and Catalyst 8510 MSR) 20-7
: understanding (Catalyst 8540 MSR) 20-5
: understanding (LightStream 1010 and Catalyst 8510 MSR) 20-7

funneling 16-26

G

global configuration mode

: accessing 2-1
: configuring interface-level OAM in 6-4
: table 2-2

H

hardware

: testing installation and configuration (Catalyst 8540 MSR) 3-33
: verifying 3-3

hardware RM

: description (Catalyst 8510 MSR and LightStream 1010) 8-2

hierarchical VP tunnel

: service categories, table 15-14

hostname command 3-24

: using 2-4

I

ICMP

: host unreachable message 11-10

IISP 9-1

: configuring 7-8, 7-9
: configuring static routes for 3-23
: displaying configurations 7-9

ILMI 9-1

: construction of switch prefixes by 3-5
: interface configuration 9-6

incoming-port atm command 16-16

initial IP configuration

: testing 3-37

interception functions

: of ATM switch hardware 6-2

interface

: modifying default configuration 3-5
: new address formats 3-8

interface address formats

: table (Catalyst 8540 MSR) 2-6

interface atm command

: enabling the configuration server 13-12
: setting up LANE clients and servers 13-13
: setting up LANE clients only 13-14

interface command

: entering command mode with 2-6, 2-7

interface configuration 18-2

: 155 Mbps (Catalyst 8510 MSR and LightStream 1010) 17-4
: 622 Mbps (Catalyst 8510 MSR and LightStream 1010) 17-7
: 622 Mbps (Catalyst 8540 MSR) 17-6
: DS3 and E3 (Catalyst 8540 MSR) 17-8
: OC-3c (Catalyst 8540 MSR) 17-5
: T1/E1 trunk (Catalyst 8510 MSR and LightStream 1010) 17-11
: T1/E1 trunk (Catalyst 8540 MSR) 17-10

interface configuration mode

: description 2-6
: disabling OAM AIS flow, example 6-4
: OAM operations on 6-4
: table 2-2

interface level OAM

: configuring 6-4

interface serial command 19-28

interface snooping

: configuring 5-30

interface-level OAM

: enabling AIS and end-to-end loopback, example 6-4

Interim-Interswitch Signalling Protocol

: See IISP

interlock code information element

: See CUG IC IE

interval command 14-7

IP access lists

: applying on inbound or outbound interfaces 11-10
: applying to an interface 11-10
: configuration, examples 11-11, 11-12
: creating extended 11-9
: creating standard 11-9
: description 11-9
: dynamic 11-9
: extended 11-9
: implicit masks 11-9
: implicit masks, example 11-11
: logging violations 11-9
: standard 11-9
: styles 11-9
: undefined 11-10
: virtual terminal lines 11-10

ip access-group command 11-10

ip address command

: ATM ARP client 12-3, 12-4
: classical IP over ATM 12-6
: IP address and subnet mask 3-7
: LANE client 13-14
: LANE server, BUS, and client 13-13
: loopback interface 15-3
: tag switching on the ATM interface 15-4
: tag switching on VP tunnels 15-10
: TDP control channels 15-8

IP addresses

: as configuration prerequisite 3-2
: as ping destination (Catalyst 8510 MSR and LightStream 1010) 6-5
: assigned by BOOTP protocol 3-3
: configuring 3-7
: configuring parallel interfaces for, note 15-4
: displaying configuration 3-8
: of loopback interfaces 15-3
: set to default 3-3

ip command 12-7, 12-8, 12-9

ip host-routing command 12-3, 12-4, 12-6, 12-7, 12-9

ip route command 12-8, 20-2

ip unnumbered command 15-4, 15-10

K

keepalive command 19-13

keepalive interval

: configuring 19-13

L

LAN emulation

: example 13-15

LANE

: ATM address of configuration server 13-8
: ATM address syntax 13-3
: ATM address templates 13-4
: configuration plan and worksheet 13-6
: configuration server on interface 13-5
: configuration task list 13-5
: configuring ATM address prefix 13-3
: constructing ATM addresses 13-3
: database task list 13-9
: default database name 13-9
: emulated LANs and subnetworks 13-14
: enabling the configuration server 13-12
: ESI field in ATM address 13-3
: ESI template 13-4
: ESI values derived from MAC address 13-4
: MAC addresses 13-3
: membership 13-6
: prefix template 13-4
: restricted membership database 13-11
: routing between emulated LANs 13-13, 13-14
: rules for assigning components to subinterfaces 13-5
: setting up client and server 13-13 to 13-14
: setting up database 13-9
: setting up database for unrestricted membership 13-10
: setting up server and clients 13-13 to 13-14
: unique ATM address for 13-3
: values of wildcard characters, table 13-4
: wildcards in ATM address templates 13-4

LANE client

: assigning protocol address 13-14
: changing to different emulated LAN 13-13
: MAC address for 13-3

lane client ethernet command 13-13, 13-14, 13-15, 13-16

lane client-atm-address command 13-15

lane config auto-config-atm-address command 13-12

lane config database command 13-12

LANE configuration server

: See LECS

LANE configuration server database configuration mode

: description 2-12
: table 2-4

lane database command 13-9, 13-10, 13-11, 13-16

: entering command mode with 2-12

lane server-bus ethernet command 13-13

lbo command 17-10, 17-12

LECS 9-1

line command

: entering command mode with (Catalyst 8510 MSR and LightStream 1010) 2-8
: entering command mode with (Catalyst 8540 MSR) 2-8

line configuration

: for ATM switch router (Catalyst 8540 MSR) 3-2

line configuration mode

: description (Catalyst 8510 MSR and LightStream 1010) 2-8
: description (Catalyst 8540 MSR) 2-8
: table 2-3

linecode command 17-12

link distance

: configuring 8-29
: displaying configuration 8-29

list command 14-5

LMI

: displaying statistics on port adapters with NNI interface, example 19-13, 19-14, 19-15

LMI keepalive interval

: configuring 19-13

LMI polling intervals

: changing, example 19-14

load-interval commands 4-3

logging command 4-3

loopback interfaces

: configuring for tag switching 15-3
: configuring, example 15-3
: displaying configuration, example 15-4

M

MAC address

: adding to BOOTP configuration file 3-4
: in LANE ATM address 13-3

main-cpu command 3-27

map list

: configuration 12-9
: example 12-8, 12-10

map-class command

: entering command mode with 2-9

map-class configuration mode

: description 2-9
: table 2-3

map-group command 12-7, 12-9

map-list command 12-8, 12-9

: entering command mode with 2-9

map-list configuration 12-7

map-list configuration mode

: description 2-9
: table 2-3

masks

: implicit in IP access lists, example 11-11

max-admin-weight-percentage command 10-33

maximum burst size

: See MBS

maximum queue size

: configuring (Catalyst 8510 MSR and LightStream 1010) 8-18

max-records command 16-16

MBS

: configuring ATM default 8-33
: displaying configuration 8-34

mdl command 19-4

messages

: access list violation 11-9
: logging 11-9

min-age command 14-7

modem support

: configuration (Catalyst 8510 MSR and LightStream 1010) 4-2
: configuration (Catalyst 8540 MSR) 4-1

modes

: See command modes

MSRP

: on ATM switches 1-2

multipoint-to-point funnel signalling 16-26

multiservice switch route processors

: See MSRP

N

name command

: ELAN 13-10, 13-11
: node name 10-18

name server-atm-address command 13-10, 13-11, 13-12, 13-16

NCDP

: configuring 3-12
: considerations 3-14
: enabling 3-15
: optimized, figure 3-15
: synchronized, figure 3-13

ncdp

: command 3-16

ncdp max-diameter

: command 3-16

ncdp revertive command 3-16

ncdp source priority command 3-16

NEs

: cell flows and 6-1

netmask address

: configuration prerequisite 3-2

Network Clock Distribution Protocol

: See NCDP

network clocking

: configuring NCDP 3-12
: configuring sources and priorities (Catalyst 8510 MSR and LightStream 1010) 3-10
: configuring sources and priorities (Catalyst 8540 MSR) 3-9
: configuring transmit source 3-10
: displaying configuration 3-11

network command 15-5

network configuration

: figure 7-2

network connectivity

: checking (Catalyst 8510 MSR and LightStream 1010) 6-5
: checking (Catalyst 8540 MSR) 6-4

network elements

: See NEs

network management interface

: description (Catalyst 8510 MSR and LightStream 1010) 8-2
: description (Catalyst 8540 MSR) 8-1

network routing

: configuring 3-23

network service access point

: See NSAP address

network service access point addresses

: See NSAP addresses

Network Time protocol

: See NTP

network-clock-select bits command (Catalyst 8540 MSR) 3-9

network-clock-select command 17-9, 17-12

network-clock-select command (Catalyst 8510 MSR and LightStream 1010) 3-10

network-clock-select command (Catalyst 8540 MSR) 3-9

Network-to-Network Interface

: See NNI

next-node command 10-36

NNI 9-1

nodal-representation command 10-49

node 1 disable command 10-10

node 1 level enable command 10-10

node command 10-18

: aggregation mode 10-46
: complex node representation for LGNs 10-49
: entering command mode with 2-10
: hello, database sync, and flooding 10-50
: LGN and peer group ID 10-16
: node election leadership priority 10-20
: parent node 10-19
: redistribution 10-43
: scope mapping 10-15
: significant change threshold 10-47
: summary address 10-13, 10-22
: transit restriction 10-42

non-default well-known PVCs

: configuring 5-25

NSAP addresses

: configuring 9-2
: hierarchical addressing model 3-5

NTP 4-8

ntp command 4-8

NVRAM

: storing configurations in 3-31

O

OAM

: ATM switch hardware support for 6-2
: cell flow support 6-1
: commands for configuring functions 6-3
: configuring for entire switch (Catalyst 8510 MSR and LightStream 1010) 6-3
: configuring for entire switch (Catalyst 8540 MSR) 6-3
: configuring interface level 6-4
: disabled 6-2
: fault management function, note 6-1
: in interface configuration command mode 6-4
: maximum configured connections (Catalyst 8510 MSR and LightStream 1010) 6-3
: maximum configured connections (Catalyst 8540 MSR) 6-3
: overview 6-1
: switch component operations 6-2

OAM configuration

: displaying 6-6
: displaying, example 6-7

OAM connections

: configuring maximum, example (Catalyst 8510 MSR and LightStream 1010) 6-4
: configuring maximum, example (Catalyst 8540 MSR) 6-3

OAM software

: capabilities 6-2

OC-12 interface

: configuration 17-6
: modifying default configuration 17-7

OC-3c

: configuration 17-6
: defaults 17-5
: interface configuration 17-5

OC-3c interface

: changing mode of operation 3-6
: configuration 17-3
: displaying configuration 3-6
: modifying default configuration 3-5

Operation, Administration, and Maintenance

: See OAM

OSF

: configuring (Catalyst 8510 MSR and LightStream 1010) 8-7

OSI 9-2

OSPF

: configuring, example 15-6
: displaying configuration of, example 15-6

OSPF protocol

: displaying configuration of 15-6

outgoing-port atm command 16-16

output pacing

: configuration 8-23
: configuring 8-23
: displaying configuration 8-23

output queue maximum size

: displaying configuration (Catalyst 8510 MSR and LightStream 1010) 8-19

output virtual circuit

: See OVC

OVC 8-26

oversubscription factor

See OSF

P

packet discard 16-2

parallel interfaces

: unnumbering, note 15-4

parent command 10-19

passwords

: setting 2-5

PBX 18-1, 18-8

peer group I 9-2

permanent virtual channels

: See PVCs

permanent virtual path connection

: See PVP

permanent virtual path numbers

: See PVP numbers

physical interface

: configuring 8-18
: See PIF

PIF 15-13

ping atm command 17-13

ping atm interface atm command (Catalyst 8510 MSR and LightStream 1010) 4-15, 6-5

ping atm interface atm command (Catalyst 8540 MSR) 4-15, 6-4

ping destinations

: in ATM connections (Catalyst 8510 MSR and LightStream 1010) 6-5

ping ip command 3-8, 3-37

PNNI 7-8, 9-1, 10-1

: commands used to configure routing 2-10
: hierarchical addressing model of peer groups 3-5

PNNI explicit path

: configuration 10-36
: displaying 5-18

PNNI explicit paths

: description 10-35

PNNI explicit-path configuration mode

: table 2-3

PNNI interfaces

: configuring static routes as, note 3-23

PNNI link selection

: configuration 10-31
: methods, table 10-31

PNNI node configuration mode

: description 2-10
: table 2-3

PNNI node ID 9-2

pnni-remote-exterior-metrics command 10-34

pnni-remote-internal command 10-34

point-to-multipoint

: configuring PVC connections 5-9

port adapter

: ATM switch support for (LightStream 1010 and Catalyst 8510 MSR) 1-3
: CES/T1 and E1 17-2, 18-1
: DS3 and E3 17-8
: on carrier modules (LightStream 1010 and Catalyst 8510 MSR) 1-2
: overview 17-1
: T1 and E1 17-10

port select group 14-14

ports

: configuring for VP tunnels 15-11

power-on diagnostics

: testing 3-35

precedence command 10-34

primary reference source

: See PRS

private branch exchange

: See PBX

Private Network-Network Interface

: See PNNI

privilege command 4-7

privileged EXEC mode

: description 2-5
: security level of 2-1
: table 2-2
: See also EXEC mode

prompts

: angle bracket in 2-4
: pound sign in 2-5
: rommon>, note 3-3
: system 2-2, 2-4

protocol addresses

: commands used for mapping 2-9

PRS 3-12

ptse significant-change command 10-47, 10-51

public VP tunnel network

: figure 7-11

purge command 16-16

PVCs

: configuring 5-3, 5-10
: configuring endpoints to PVP tunnels 7-19
: configuring soft 5-15
: configuring soft, route optimization 5-23
: configuring terminating 5-6
: configuring, note 5-3
: example 5-3, 5-7, 5-10
: traffic values in CTT data structure 8-11

PVP numbers

: on VP tunnels, note 15-7

PVP tunnels

: in configuring PVCs 7-19

PVPs

: configuring 5-13
: connecting 15-11
: description 5-7
: example 5-8, 5-13

Q

QoS 15-13

: ATM Forum Class A 3-23

quality of service

: See QoS

R

rate scheduler

: See RS

RCAC

: description 8-2
: description (Catalyst 8510 MSR and LightStream 1010) 8-2

RDI functions

: cell flows and 6-1

redistribute atm-static command 10-43

redundancy

: configuring 3-24
: configuring route processors 3-25, 3-27, 3-28, 3-29, 3-30
: displaying route processor configuration 3-28, 3-29
: simple server 13-3

redundancy command 3-27, 3-28, 3-29, 3-30

: entering command mode with 2-14

redundancy configuration mode

: description 2-14
: table 2-4

redundancy force-failover main-cpu command 3-25

relative weight

: configuring 15-15
: description 15-15

relay functions

: of ATM switch hardware 6-2

remote defect indication functions

: See RDI functions

Remote Monitoring

: See RMON

remote-log command 14-12

reprogram command (Catalyst 8540 MSR) 20-5

reprogram command (LightStream 1010 and Catalyst 8510 MSR) 20-8

resource call admission control

: See RCAC

resource management

: See RM

resource-poll-interval command 10-52

RFC 1577 9-1

RFC 1757 14-13

: functions (Catalyst 8510 MSR and LightStream 1010) 8-2
: functions (Catalyst 8540 MSR) 8-1
: overview 8-1

RMON 14-13

: configuring 3-31

rmon alarm command 14-18

rmon event command 14-17

ROM monitor mode

: table 2-2

rommon> prompt

: recovering from, note 3-3

route processor redundancy

: configuring 3-25, 3-27, 3-28, 3-29, 3-30

route processors

: displaying redundancy configuration 3-28, 3-29
: forcing a switchover 3-25
: synchronizing configurations 3-27

router command 15-5

router configuration mode

: See ATM router configuration mode

routing table

: adding entries for Telnet station or SNMP network management workstation, note 3-1

RS 8-26, 15-13

S

scheduler and service class

: configuring 8-26

scheduler command 4-5

scope command 16-16

scope map command 10-15

scope mode command 10-15

SCR

: configuring margin factor 8-13
: displaying margin configuration 8-13

scrambling command 17-4, 17-6, 17-7, 17-10, 17-12

security

: in user interface 2-1
: See also authentication

segment end point

: in ATM switches 6-2

segment loopback flow

: checking with ping command, example (LightStream 1010 and Catalyst 8510 MSR) 6-6
: checking with ping command, example of (Catalyst 8540 MSR) 6-5

segment loopbacks

: effect of ping command on unenabled, note (LightStream 1010 and Catalyst 8510 MSR) 6-6
: enabling, example (Catalyst 8510 MSR and LightStream 1010) 6-3
: enabling, example (Catalyst 8540 MSR) 6-3
: ping of neighbor switch with (Catalyst 8510 MSR and LightStream 1010) 6-5

segment-target command

commands

: segment-target 10-36

serial interface

: See Frame Relay serial interface

servers

: simple server redundancy 13-3

service categories and TBR classes, table 15-14

service category

: configuring support 8-36
: displaying 8-37
: restrictions 8-37

service category limit

: configuring (Catalyst 8510 MSR and LightStream 1010) 8-8
: displaying configuration (Catalyst 8510 MSR and LightStream 1010) 8-8

service class

: configuring 8-26
: displaying information 8-28

service command 4-5

Service IWF

: configuring a PVC, example 19-24

service-category command 16-16

SGCP

: configuring 18-34
: configuring call agents 18-39
: configuring CES circuits 18-35
: configuring request handling 18-38
: displaying configuration 18-35
: displaying connections 18-38
: displaying endpoints 18-37
: operation 18-34
: shutdown 18-39

sgcp call-agent command 18-39

sgcp command 18-35

sgcp graceful-shutdown command 18-39

sgcp request retries command 18-38

sgcp request timeout command 18-38

ships in the night

: See SIN

show atm accounting command 14-6, 14-8, 14-9, 14-10, 14-13

show atm address command 9-5, 9-7, 19-28, 19-30, 19-32

show atm addresses command 5-15, 10-6, 10-10, 17-13

show atm arp-server command 12-5

show atm filter-expr command 11-6

show atm filter-set command 11-6

show atm ilmi-configuration command 9-5

show atm ilmi-status atm command 7-21, 9-8

show atm ilmi-status command 8-17, 8-34, 9-5

show atm int resource command 8-28

show atm interface atm command 5-24, 7-3, 7-4, 7-6, 7-7, 7-9, 7-12, 7-21, 16-7, 16-12, 16-14, 19-35

show atm interface command 5-3, 7-18

show atm interface rm atm command 8-23, 8-25, 8-29, 8-31, 8-37

show atm interface rm command 8-33

show atm interface rm command (Catalyst 8510 MSR and LightStream 1010) 8-19

show atm map command 12-5, 12-6, 12-8, 12-10

show atm pnni aggregation link command 10-46

show atm pnni aggregation node command 10-46, 10-50

show atm pnni background status command 10-29

show atm pnni background-routes command 10-29

show atm pnni command 10-18, 10-19, 10-41, 14-4, 14-6, 14-8, 14-9, 14-11, 16-7

show atm pnni election command 10-20

show atm pnni election peers command 10-20

show atm pnni explicit-paths 10-38

show atm pnni hierarchy command 10-19

show atm pnni identifier 10-37

show atm pnni interface atm command 10-45

show atm pnni interface command 10-42

show atm pnni local-node command 10-10, 10-17, 10-18, 10-33, 10-41, 10-42, 10-44, 10-51

show atm pnni neighbor command 10-32

show atm pnni precedence command 10-35

show atm pnni resource-info command 10-48, 10-52

show atm pnni scope command 10-15

show atm pnni statistics command 10-54

show atm pnni summary command 10-13, 10-22

show atm pnni topology node 10-37

show atm pnni topology node command 10-37

show atm qos command 8-6

show atm resource command 8-7, 8-13

show atm resource command (Catalyst 8510 MSR and LightStream 1010) 8-8, 8-9

show atm rmon command 14-15

show atm rmon host command 14-15

show atm rmon stats command 14-15

show atm route command 10-8, 10-12, 16-7

show atm signalling cug command 16-23

show atm signalling diagnostics filter command 16-18

show atm signalling diagnostics record command 16-18

show atm signalling diagnostics status command 16-18

show atm signalling statistics command 16-24

show atm snoop command 5-30

show atm snoop-vc command 5-31

show atm snoop-vp command 5-31

show atm status command 16-27, 17-13

show atm vc cast mp2p command 16-27

show atm vc command 5-3, 5-16, 17-13

show atm vc interface atm command 5-7, 5-11, 5-16, 7-14, 7-17, 7-20

show atm vc interface command 5-18

show atm vp command 5-8, 5-13, 5-21, 15-11

show calendar command 4-11

show capability command 3-30

show cdp command 4-3

show ces address command 18-9, 18-13, 18-16, 18-20, 18-22, 18-24, 18-27, 18-30, 18-32

show ces circuit command 18-9, 18-14, 18-15, 18-16, 18-20, 18-24, 18-27, 18-32

show ces circuit interface command 18-6, 18-9, 18-11, 18-14, 18-20, 18-22, 18-24, 18-27, 18-31, 18-32, 18-34

show clock command 4-11

show controller e1 command 19-9

show controller t3 command 19-5

show controllers atm command 3-6

show controllers command 3-11, 17-13

show environment command 4-15

show frame relay connection-traffic-table command 19-17

show frame-relay interface resource serial command 19-18

show frame-relay lmi command 19-13, 19-15, 19-17

show functional-image-info command (Catalyst 8540 MSR) 20-6

show functional-image-info command (LightStream 1010 and Catalyst 8510 MSR) 20-8

show hardware command 17-13

show interface command 17-13

show interface ethernet command 17-13

show interface ethernet0 command 3-8

show interfaces serial command 19-11, 19-14

show ip ospf command 15-6

show lane bus command 13-18

show lane client command 13-18

show lane command 13-18

show lane config command 13-18

show lane database command 13-18

show lane default-atm addresses command 13-8

show lane le-arp command 13-18

show lane server command 13-18

show ncdp path root command 3-17

show ncdp ports command

commands

: show ncdp ports 3-17

show ncdp sources command 3-17

show ncdp status command 3-17

show ncdp timers command 3-17

show network-clocks command 3-11

show privilege command 4-7

show processes command 4-14

show protocols command 4-14

show redundancy command 3-26, 3-28, 3-29

show rmon alarms events command 14-18

show rmon events command 14-17, 14-18

show running-config command 17-13

show sgcp command 18-35

show sgcp connection command 18-38

show sgcp endpoint command 18-37

show stacks command 4-15

show startup-config command 17-13

show tag-switching atm-tdp capability command 15-13

show tag-switching interfaces command 15-5

show tag-switching interfaces detail command 15-7, 15-9

show vc command 19-21, 19-24, 19-25, 19-33

show vc interface serial command 19-28

show version command 17-13

signalling

: disabling 16-25
: multipoint-to-point funnel 16-26

Simple Gateway Control Protocol

: See SGCP

simple server redundancy

: configuring 13-15
: description 13-3

Simple Server Redundancy Protocol

: See SSRP

SIN 15-13

SNMP 14-2

: configuring 3-31
: description 3-31
: management, enabling 3-31

snmp-server command 4-6

snmp-server enable traps atm-accounting command 14-11

snmp-server host commands 14-11

snoop test ports (Catalyst 8510 MSR and LightStream 1010) 5-28

snooping

: configuring 5-28
: description 5-28

soft permanent virtual path

: See soft PVPs

soft PVCs

: configuring 5-15
: example 5-16
: route optimization configuration 5-23, 19-34

soft PVPs

: example 5-20

software

: testing for version 3-34
: verifying 3-3

sonet command 17-4, 17-7

sonet stm-1 command 3-6

SP 8-4

SSRP 9-3, 13-15

static routes

: configuring for IISP or PNNI 3-23
: PNNI 10-7, 10-11, 10-12

static-local-exterior command 10-34

static-local-exterior-metrics command 10-34

static-local-internal-metrics command 10-34

statistics command 10-53

status command 16-16

stop-only tacacs+ command 4-14

strict priority

: See SP

STS-stream scrambling

: disabling 3-6

subinterface configuration mode

: description 2-7
: table 2-2

subinterfaces

: rules for assigning LANE components 13-5

subnetting

: mask bits 3-7

summary-address command 10-13, 10-22

sustainable cell rate

: See SCR

SVC

: CTTs in 8-11

SVC frame discard

: configuration 16-2

switch processors

: configuring EHSA 3-30
: displaying EHSA configuration 3-30
: establishing spare card 3-30
: installing in chassis, note (LightStream 1010 and Catalyst 8510 MSR) 1-2

switch router

: switching EHSA operation 3-29

switch-card redundant command 3-30

switches

: configuring OAM (Catalyst 8510 MSR and LightStream 1010) 6-3
: configuring OAM (Catalyst 8540 MSR) 6-3
: OAM operation 6-2

sync command 3-27

system availability

: ATM switch router (Catalyst 8540 MSR) 1-4

system prompts 2-2, 2-4

system redundancy

: configuring 3-24

system requirements

: for tag switching (Catalyst 8510 MSR and LightStream 1010) 15-2
: for tag switching (Catalyst 8540 MSR) 15-2

T

T1 channels

: configuring time slots 1 through 5, example 19-5
: time slot groupings, note 19-5

t1 command 19-5

T1 default interface

: configuring 17-11

T1 line

: configuration 19-5
: defaults 19-4
: description 19-3

T1 trunk

: configuration 17-10

T3 trunk

: demultiplexes 19-3
: description 19-3

TACACS

: description 4-11

TACACS and XTACACS

: enabling 4-13

tag switching

: configuring CoS 15-13
: configuring loopback interfaces 15-3
: configuring on VP tunnels 15-9
: configuring overview 15-2
: displaying configuration on ATM interfaces, example 15-5
: enabling on ATM interfaces 15-4
: example configuration 15-17
: overview 15-1
: system requirements for tag switching (Catalyst 8510 MSR and LightStream 1010) 15-2
: system requirements for tag switching (Catalyst 8540 MSR) 15-2

tag virtual channels

: See TVCs

tag-switching atm control-vc command 5-26, 15-8

tag-switching atm vpi command 15-7

tag-switching ip command 15-4, 15-8, 15-10

TDP control channels

: between source switches and destination switches, figure 15-8
: changing default 15-8
: configuring 15-8
: configuring on destination switches, example 15-9
: configuring on source switches, example 15-9
: displaying configuration 15-9
: displaying configuration, example 15-9

TDP identifiers

: loopback interface as 15-3

TDP sessions

: troubleshooting 15-9

template alias

: configuring 11-2

terminal

: access control, establishing 4-11

Terminal Access Controller Access Control System

: See TACACS

terminal line

: configuration (Catalyst 8510 MSR and LightStream 1010) 4-2
: configuration (Catalyst 8540 MSR) 4-1

testing

: ATM address configuration 3-36
: ATM connectivity 3-37
: ATM interface configuration 3-37
: ATM interface status 3-38
: configuration of NVRAM configuration 3-41
: configuration register installation 3-34
: configurations 3-32
: Ethernet connection 3-37
: Ethernet interface configuration 3-36
: hardware installation and configuration (Catalyst 8540 MSR) 3-33
: initial IP configuration 3-37
: power-on diagnostics 3-35
: running configuration 3-40
: software versions and type 3-34
: VC connections 3-38
: See also troubleshooting

tftp-server atm-accounting command 14-12

threshold group description 15-16

threshold groups

: configuring 8-14
: displaying configuration 8-17

timer command 10-51

trace command 4-15

traffic parameters

: configuring interface maximum 8-32
: displaying interface maximum configuration 8-33

transit-restricted command 10-42

troubleshooting

: interface configuration 17-13
: TDP sessions 15-9
: See also testing

TVCs

: CAC 15-17
: creating 15-8
: CTT row 15-17
: displaying 15-15
: threshold group 15-16

U

UBR

: configuring limits of best-effort connections 8-30

UNI 9-1

UNI interface

: configuring static routes for 3-23

uniqueness rule

: of ATM addresses, note 3-5

unprivileged user mode

: See user EXEC mode

unshielded twisted-pair

: See UTP

unstructured CBR services 18-8

user EXEC mode

: security level of 2-1
: table 2-2
: See also EXEC command mode

user interface

: overview 2-1

username command 4-6

UTP 18-2

: on ATM switches 1-2

V

VC merge

: configuring 15-12
: disabling (Catalyst 8510 MSR and LightStream 1010) 15-13
: disabling (Catalyst 8540 MSR) 15-12
: displaying configuration 15-13
: displaying configuration on ATM interface, example 15-13
: feature card requirements (Catalyst 8510 MSR and LightStream 1010) 15-12
: feature card requirements (Catalyst 8540 MSR) 15-12

VCC

: checking end-to-end loopback flow with ping command, example (Catalyst 8540 MSR) 6-5
: checking end-to-end loopback flow with ping command, example (LightStream 1010 and Catalyst 8510 MSR) 6-6
: checking with ping command, example (LightStream 1010 and Catalyst 8510 MSR) 6-6
: checking with ping command, example of (Catalyst 8540 MSR) 6-5