|
|
This preface describes who should read the ATM Switch Router Software Configuration Guide, how it is organized, and its document conventions.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more up to date than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically:
1. Click Feedback in the toolbar.
2. Select Documentation.
3. Complete the form, click Submit, and send it to Cisco Systems.
If you are reading printed documentation that contains a response card, you can complete the card and mail it to Cisco Systems.
We appreciate your comments.
This publication is intended for experienced network administrators who are responsible for configuring and maintaining the ATM switch router.
The major sections of this guide are as follows:
| Chapters |
|
|
Provides an overview of the ATM switch router features and functions. | ||
Describes how to access the commands available in each command mode and explains the primary uses for each command mode. | ||
Describes the initial configuration of the ATM switch router. | ||
Describes the tasks to manage the general system features, such as access control and basic management of the ATM switch router. | ||
Describes how to configure virtual connections after autoconfiguration has determined the default virtual connections. | ||
Describes the OAM fault management and performance management functions of the ATM switch router. | ||
Describes how to configure typical ATM network interfaces after autoconfiguration has established the default network connections. | ||
Describes how to configure the management of switch, interface, and connection resources. | ||
Describes the Interim Link Management Interface protocol implementation and configuration. | ||
Describes how to configure the Interim Interswitch Signaling Protocol (IISP) and the Private Network-Network Interface (PNNI) protocol. | ||
Describes how to configure and maintain access control lists. | ||
Describes how to configure the Ethernet port for IP-over-ATM connections. | ||
Describes how to configure LAN emulation on the ATM switch router. | ||
Describes the ATM accounting and ATM Remote Monitoring features and their configuration. | ||
Describes how to configure tag switching on the ATM switch router. | ||
Describes how to configure common and specialized signalling features. | ||
Describes the steps required to configure the individual port adapter interfaces. | ||
Describes the steps to configure the Circuit Emulation Services port adapter modules. | ||
Configuring Frame Relay-to-ATM Interworking Port Adapter Interfaces | Describes the steps to configure the Frame Relay to ATM interworking port adapter modules. | |
Managing Configuration Files, System Images, and Functional Images | Includes procedures for updating and maintaining the ATM switch router software and configurations. | |
| Appendix |
| |
Provides examples for migrating from a flat PNNI topology to a hierarchical topology. | ||
Unless otherwise noted, all information in this document is relevant to the Catalyst 8540 MSR, Catalyst 8510 MSR and LightStream 1010 ATM switch router platforms. Platform specific sections have the platform name appended to the title in parentheses. For example, the section "Configuring Redundancy and Extended High System Availability (Catalyst 8540 MSR)" in "Initially Configuring the ATM Switch Router" is only relevant to the Catalyst 8540 MSR platform.
Command descriptions use the following conventions:
boldface font | Commands and keywords are in boldface. |
italic font | Arguments for which you supply values are in italics. |
[ ] | Elements in square brackets are optional. |
{ x | y | z } | Alternative keywords are grouped in braces and separated by vertical bars. |
[ x | y | z ] | Optional alternative keywords are grouped in brackets and separated by vertical bars. |
string | A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks. |
Screen examples use the following conventions:
| Terminal sessions and information the system displays are in |
boldface screen font | Information you must enter is in boldface screen font. |
italic screen font | Arguments for which you supply values are in italic screen font. |
| |
^ | The symbol ^ represents the key labeled Control. For example, the key combination ^D in a screen display means hold down the Control key while you press the D key. |
< > | Nonprinting characters, such as passwords, are in angle brackets. |
[ ] | Default responses to system prompts are in square brackets. |
!, # | An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line. |
Notes use the following conventions:
Cautions use the following conventions:
 | Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. |
The ATM switch router documentation is primarily an ATM configuration documentation set. You may be referred to the Cisco IOS documentation set for information about IP and router configuration and other non-ATM related features. For example, when configuring the IP address on the ATM switch processor only basic configuration steps are provided. If you need additional overview or detailed IP configuration information, that information is provided in the Cisco IOS documentation set.
The ATM switch router documents are separated into two groups:
The ATM Switch Router Software Configuration Guide is one of the advanced configuration documents and should only be used after you have completed the processes described in the basic document set. Refer to the following documents for detailed hardware installation and basic configuration information:
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
Posted: Mon Aug 16 14:14:58 PDT 1999
Copyright 1989-1999©Cisco Systems Inc.
