|
|
June 7, 1999
Catalyst 8540 MSR channelized DS3 Frame Relay port adapter functional image name fi-c8540-1t3.A.4.0
This document describes the features and caveats for Cisco functional image, fi-c8540-1t3.A.4.0, for the 1CT3 channelized DS3 Frame Relay port adapters used with the Catalyst 8540 MSR.
This version of functional image fixes the DDTS listed in the section "Caveats" later in this release note.
This release note includes the following sections:
The Catalyst 8540 MSR provide switched ATM connections to individual workstations, servers, LAN segments, or other ATM switches and routers using fiber-optic, unshielded twisted-pair (UTP), and coaxial cable.
The channelized DS3 Frame Relay port adapter facilitates interworking between a Frame Relay network, an ATM network, and network users. Existing Frame Relay users can also migrate to higher bandwidth ATM using channelized Frame Relay port adapters. Additionally, these port adapters extend the ATM network across a wide area over a frame-based serial line or intervening Frame Relay WAN.
This section describes the process you use to determine the existing functional image version installed on your channelized DS3 Frame Relay port adapter.
To display the functional image version in a channelized DS3 Frame Relay port adapter, use the following command in privileged EXEC mode:
| Command | Purpose |
|---|---|
show functional-image-info [slot number | subslot slot/subslot] | Displays the functional image information. |
The following example shows the firmware functional image information in the controller for the Frame Relay port adapter in subslot 4/0:
switch# show functional-image-info subslot 4/0 ##HardwareRequired : B8(3.1)
##FunctionalVersion : 4.0 ##Sections : 1 ##Section1Format : BINARY, length = 303016 # PUMA-4CE1 Firmware image
# Firmware Image : fi-c8540-1t3.A.4.0 # # EPLD config file : C85MS-4E1-FRRJ48.jcf # Chain description: # Part type Bits Config file # EPM7256S 10 /auto/projects/cougar/custom/puma/pld/testbench/PROG_FILES/4 CE1/PLD/DB/7256.pof # EPM7064S 10 /auto/projects/cougar/custom/puma/pld/testbench/PROG_FILES/4 CE1/PLD/DB/7064.pof # EPM7064S 10 /auto/projects/cougar/custom/puma/pld/testbench/PROG_FILES/4 CE1/PLD/MB/7064.pof # Number devices = 3 # Number of instruction bits = 30 # # FPGA config file information: ###End-of-header
For detailed functional image upgrade instructions, see the "Maintaining Functional Images" section in the "Managing Configuration Files, System Images, and Functional Images" chapter of the ATM Switch Router Software Configuration Guide.
 | Caution Functional image download can not be reverted back once the download is started. Do not interrupt the download procedure. Wait until it has finished before attempting any commands on the switch. Confirm that the download is done in binary mode and check file sizes before and after download. A failure during reprogramming can result in the card being unusable. |
This section contains listings of the caveats for this channelized DS3 Frame Relay port adapter firmware functional image.
Use the table to determine if a particular caveat applies to your firmware functional image release, or if a particular caveat was corrected in your firmware image release. These caveats are described in detail in the following section "Open Caveats."
Table 1 lists the known caveats and corrected caveats for this channelized DS3 Frame Relay port adapter functional image.
| DDTS Number | Firmware Functional Image Release | |
|---|---|---|
| 4.0 | ||
| Corrected | Caveat | |
CSCdk88859 |
| x |
This section describes the open caveats for this channelized DS3 Frame Relay port adapter functional image:
For service and support for a product purchased from a reseller, contact the reseller. Resellers offer a wide variety of Cisco service and support programs, which are described in the section "Service and Support" in the information packet that shipped with your product.
For service and support for a product purchased directly from Cisco, use CCO.
For helpful tips on configuring Cisco products, follow this path on CCO:
Software & Support: Technical Tips (button on left margin)
"Hot Tips" are popular tips and hints gathered from Cisco's Technical Assistance Center (TAC). Most of these documents are also available from the TAC's Fax-on-Demand service. To access Fax-on-Demand and receive documents at your fax machine, call 888-50-CISCO (888-502-4726). From international areas, call 650-596-4408.
The following sections are provided from the Technical Tips page:
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
Posted: Fri Aug 25 09:44:26 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.
