|
|
September 22, 1999
Catalyst 8540 MSR carrier module FPGA image name fi-c8540-scam.A.1-7
This document describes the features and caveats for Cisco field-programmable gate array (FPGA) functional image, fi-c8540-scam.A.1-7, for the carrier modules used with the Catalyst 8540 MSR.
This version of carrier module FPGA image fixes a potential problem following a route processor switchover some interfaces are not recognized. This version of FPGA image fixes the DDTS listed in the section "Caveats" later in this release note.
This release note includes the following sections:
The Catalyst 8540 MSR provide switched ATM connections to individual workstations, servers, LAN segments, or other ATM switches and routers using fiber-optic, unshielded twisted-pair (UTP), and coaxial cable.
Carrier modules allow you to install up to two half-width port adapters in the Catalyst 8540 MSR. Carrier modules used in Catalyst 8510 MSR, Catalyst 5500, and LightStream 1010 are not interchangeable with carrier modules used in the Catalyst 8540 MSR. Full-width interface modules supported by the Catalyst 8540 MSR do not require installation via a carrier module.
This section describes the process you use to determine the existing FPGA functional image version installed on your carrier module.
To display the functional image version in a carrier module, use the following command in privileged EXEC mode:
| Command | Purpose |
|---|---|
show functional-image-info [slot number | subslot slot/subslot] | Displays the functional image information. |
The following example shows the FPGA functional image information for the carrier module in slot 0:
Switch# show functional-image-info slot 0 Details for super cam Image on slot: 0 Functional Version of the FPGA Image: 1.7 #Jtag-Distribution-Format-B #HardwareRequired: A00(2.2,3.0,4.0,4.1-20) #FunctionalVersion: 1.7 #Sections: 2 #Section1Format: MOTOROLA_EXORMAX #Section2Format: ALTERA_JAM, length=28678 Copyright (c) 1996-99 by cisco Systems, Inc. All rights reserved. generated by: mclewell on: Wed Mar 24 09:58:08 PST 1999 using: /cougar/bin/jtag_script Version 1.10 config file: config.jcf Chain description: Part type Bits Config file xc4036 3 /cougar/custom/scm/abr/syn/t50/main_io_r.bit xc4036 3 /cougar/custom/scm/abr/syn/t50/main_io_r.bit xc4010 3 /cougar/custom/scm/cpu/syn/cpu_io_r.bit EPM7064S 10 /cougar/custom/scm/netclk/altera/netclk.pof EPM7064S 10 /cougar/custom/scm/oe_fpga/altera/oe_fpga.pof XC4005 3 /cougar/custom/common/jtcfg/xil/jtcfg_r.bit Number devices = 6 Number of instruction bits = 32 FPGA config file information: Bitgen date/time Sum File 1999/03/24 08:15:31 56525 /cougar/custom/scm/abr/syn/t50/main_io_r.bit 1999/03/24 08:15:31 56525 /cougar/custom/scm/abr/syn/t50/main_io_r.bit 98/06/16 16:44:28 65317 /cougar/custom/scm/cpu/syn/cpu_io_r.bit 98/06/12 12:09:12 3771 /cougar/custom/scm/netclk/altera/netclk.pof 99/03/10 12:52:39 60946 /cougar/custom/scm/oe_fpga/altera/oe_fpga.pof 98/06/11 16:56:44 49904 /cougar/custom/common/jtcfg/xil/jtcfg_r.bit #End-Of-Header
For detailed FPGA image upgrade instructions, see the "Maintaining Functional Images" section in the "Managing Configuration Files, System Images, and Functional Images" chapter of the ATM Switch Router Software Configuration Guide.
This section contains listings of the caveats for this carrier module FPGA functional image.
Use the table to determine if a particular caveat applies to your FPGA functional image release, or if a particular caveat was corrected in your FPGA or firmware image release. These caveats are described in detail in the following section "Resolved Caveats."
Table 1 lists the known caveats and corrected caveats for this carrier module FPGA image.
| DDTS Number | FPGA Release fi-c8540-scam.A.1-7 | FPGA Release fi-c8540-scam.A.1-5 | ||
|---|---|---|---|---|
| Corrected | Caveat | Corrected | Caveat | |
CSCdm89205 | x |
|
| x |
CSCdm06962 | x |
| x |
|
CSCdm12694 | x |
| x |
|
This section describes the closed caveats for this carrier module FPGA functional image.
This version of carrier module FPGA image fixes the following known DDTSs:
For service and support for a product purchased from a reseller, contact the reseller. Resellers offer a wide variety of Cisco service and support programs, which are described in the section "Service and Support" in the information packet that shipped with your product.
For service and support for a product purchased directly from Cisco, use CCO.
For helpful tips on configuring Cisco products, follow this path on CCO:
Software & Support: Technical Tips (button on left margin)
"Hot Tips" are popular tips and hints gathered from Cisco's Technical Assistance Center (TAC). Most of these documents are also available from the TAC's Fax-on-Demand service. To access Fax-on-Demand and receive documents at your fax machine, call 888-50-CISCO (888-502-4726). From international areas, call 650-596-4408.
The following sections are provided from the Technical Tips page:
Cisco Connection Online (CCO) is Cisco Systems' primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services.
Available 24 hours a day, 7 days a week, CCO provides a wealth of standard and value-added services to Cisco's customers and business partners. CCO services include product information, product documentation, software updates, release notes, technical tips, the Bug Navigator, configuration notes, brochures, descriptions of service offerings, and download access to public and authorized files.
CCO serves a wide variety of users through two interfaces that are updated and enhanced simultaneously: a character-based version and a multimedia version that resides on the World Wide Web (WWW). The character-based CCO supports Zmodem, Kermit, Xmodem, FTP, and Internet e-mail, and it is excellent for quick access to information over lower bandwidths. The WWW version of CCO provides richly formatted documents with photographs, figures, graphics, and video, as well as hyperlinks to related information.
You can access CCO in the following ways:
For a copy of CCO's Frequently Asked Questions (FAQ), contact cco-help@cisco.com. For additional information, contact cco-team@cisco.com.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated monthly. Therefore, it might be more current than printed documentation. To order additional copies of the Documentation CD-ROM, contact your local sales representative or call customer service. The CD-ROM package is available as a single package or as an annual subscription. You can also access Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.
If you are reading Cisco product documentation on the World Wide Web, you can submit comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. We appreciate your comments.
Posted: Fri Aug 25 09:50:29 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.