cc/td/doc/product/aggr/vpn5000
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Release Notes for the Cisco VPN 5000 Client Version 4.2.x for Windows and Mac OS

Release Notes for the Cisco VPN 5000 Client Version 4.2.x for Windows and Mac OS

September 2000

These release notes provide information about the Cisco VPN 5000 Client Version 4.2.x, including caveats that were fixed from the previous Compatible Systems and Cisco releases. These release notes are updated as needed to describe new and changed information, caveats, and documentation updates.

This document applies to the following versions of the VPN client:

Contents

This document contains the following sections:

Cisco VPN 5000 Client for Windows 2000

The following sections describe the new VPN client Version 4.2.11 for Windows 2000, including instructions for uninstalling and installing the VPN client, and manually installing the network driver.

For operation of the VPN client using Windows 2000, refer to the Cisco VPN 5000 Client User Guide for Windows and Mac OS.

Uninstalling the VPN Client for Windows 2000

Before installing a new version of the VPN client for Windows 2000, you must first uninstall any older versions of the VPN client, and reboot your computer.

To uninstall the VPN client, use the Windows uninstaller (under Start > Settings > Control Panel > Add/Remove Programs).

Installing the VPN Client for Windows 2000

The VPN client for Windows 2000 requires that you have Windows 2000 installed, and a Pentium 90 or faster processor.


Note   You should install the VPN client from a local drive (not a mapped or network drive).

To install the VPN client for Windows 2000


Step 1   Log on to your system as the administrator, or as a user with administrator privileges.

Step 2   Copy the VPN client install file and the associated release notes to a temporary folder on your hard drive (for example, C:\temp).

Step 3   Double-click the install file.

The setup program transfers all necessary files to the destination volume of your choice and launches a program that automatically installs the appropriate network driver.

Step 4   Before you restart your computer, wait for the prompt.

If the network driver installation program is unsuccessful for any reason, you can manually install it using the instructions in the following section.


Manually Installing the Network Driver for Windows 2000

The VPN client for Windows 2000 includes a setup program that automatically launches a program to install the network driver. If the program fails for any reason, use the following instructions to manually install the network driver.


Step 1   Install the VPN client software using the "Installing the VPN Client for Windows 2000" section section.

Step 2   Log on to the system as the administrator, or as a user with administrator privileges.

Step 3   From the Start menu, select Settings > Network and Dial-up Connections.

Step 4   Double-click the appropriate Local Area Connection.

Step 5   Click Properties.

Step 6   Click Install.

Step 7   Select Service.

Step 8   Click Add.

Step 9   Click Have Disk.

Step 10   Enter the path to the folder in which the netcs.inf, netcs_m.inf, and step.sys files reside. In most cases, this is the same folder as the VPN client install file.

Step 11   Click OK to install the driver.

Step 12   After the driver is installed, close the Network and Dial-up Connections window.

Step 13   Reboot your computer.


Open Caveats for Windows 2000

This section lists open caveats for the VPN client Version 4.2.11 for Windows 2000.

  For dialup connections only. The VPN client for Windows 2000 does not pass IPX traffic when the VPN client is used over a dialup connection.
  Workaround: There is no workaround for dialup connections.
  When you copy a certificate to the desktop, or to the My Documents folder, the certificate cannot be found when you try to import it.
  Workaround: Copy the certificate file somewhere other than to the Windows desktop or the My Documents folder before you import it.
  The VPN client for Windows 2000 cannot Telnet through an established VPN tunnel to any other VPN 5000 series concentrator connected on that same subnet.
  Workaround: Telnet from another device.

Cisco VPN 5000 Client for Windows NT

Version 4.2.6 of the VPN client for Windows NT is a maintenance release that fixes two bugs.

Version 4.2.4 adds support for:

Caveats Fixed in Version 4.2.6

This section lists caveats fixed with the VPN client Version 4.2.6 release for Windows NT.

  When you install a newer version of the VPN client for Windows NT over a 3.x version, the new version now installs correctly and no longer requires a registry edit to regain VPN functionality.
  Large file transfers and FTP transfers now work with the VPN client for Windows NT. E-mail transfers using Microsoft Outlook client with a Microsoft Exchange server did not work with the VPN client Version 4.2.4.

Caveats Fixed in Version 4.2.4

This section lists caveats fixed with the VPN client Version 4.2.4 release for Windows NT.

  DNS lookup now times out properly when it looks for an invalid DNS entry.
  After you click the Disconnect button on the VPN client, you can now access local servers and establish an Internet connection.
  When the VPN client is finished importing and removing certificates, the changes now take effect immediately, and the new certificate replaces the old certificate in the root folder.

Cisco VPN 5000 Client for Windows 95/98

The VPN client Version 4.2.4 adds support for:

Open Caveats for Windows 95/98

This section lists open caveats for the VPN client Version 4.2.4 for Windows 95/98.

  Users running Win98-orig cannot connect at startup using vpnautostart.exe when they obtain an address using DHCP. The DHCP lease does not initialize in time for vpnautostart.exe to connect correctly.
  Workaround: Update to Win98SE, or ensure that all networking updates are applied to the Win98-orig install.
  Novell Client-32 for Windows 95/98 v3.10 to v3.21 does not work with the VPN client over Ethernet unless the user workstation is already on an IPX network seeding Ethernet II or 802.3 frame types.
  Workaround: Use the Novell Client Version 2.5, or the Microsoft Netware Client.

Cisco VPN 5000 Client for Mac OS

The VPN client Version 4.2.0 for Mac OS adds support for:

Caveats Fixed in Version 4.2.0

This section lists caveats fixed with the VPN client Version 4.2.0 release for Mac OS.

  When an Apple laptop running Mac OS awakens from sleep mode, you no longer have to quit and reopen the VPN client to reconnect.

Documentation Updates for Version 4.2.x

The correct names for the VPN client install programs for each platform are listed in Table 1.


Table 1: VPN Client Install Names by Platform
Platform VPN Client Install Name

Windows NT - export

vpn-5000-win-nt-x.x.x-des.exe

Windows NT - U.S.A.

vpn-5000-win-nt-x.x.x-3des.exe

Windows 95/98 - export

vpn-5000-win-95-98-x.x.x-des.exe

Windows 95/98 - U.S.A.

vpn-5000-win-95-98-x.x.x-3des.exe

Macintosh - export

vpn-5000-mac-x.x.x-des.sea.hqx

Macintosh - U.S.A.

vpn-5000-mac-x.x.x-3des.sea.hqx

Linux - export

vpn-5000-linux-x.x.x-des.tar.Z

Linux - U.S.A.

vpn-5000-linux-x.x.x-3des.tar.Z

Sparc Solaris - export

vpn-5000-solaris-x.x.x-des.tar.Z

Sparc Solaris - U.S.A.

vpn-5000-solaris-x.x.x-3des.tar.Z

Intel Solaris - export

vpn-5000-isolaris-x.x.x-des.tar.Z

Intel Solaris - U.S.A.

vpn-5000-isolaris-x.x.x-3des.tar.Z

Obtaining Documentation

World Wide Web

You can access the most current Cisco documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

Documentation CD-ROM

Cisco documentation and additional literature are available in a CD-ROM package, which ships with your product. The Documentation CD-ROM is updated monthly. Therefore, it is probably more current than printed documentation. The CD-ROM package is available as a single unit or as an annual subscription.

Ordering Documentation

Registered CCO users can order the Documentation CD-ROM and other Cisco Product documentation through our online Subscription Services at http://www.cisco.com/cgi-bin/subcat/kaojump.cgi.

Nonregistered CCO users can order documentation through a local account representative by calling Cisco corporate headquarters (California, USA) at 408 526-4000 or, in North America, call 800 553-NETS (6387).

Obtaining Technical Assistance

Cisco provides Cisco Connection Online (CCO) as a starting point for all technical assistance. Warranty or maintenance contract customers can use the Technical Assistance Center. All customers can submit technical feedback on Cisco documentation using the web, e-mail, a self-addressed stamped response card included in many printed docs, or by sending mail to Cisco.

Cisco Connection Online

Cisco continues to revolutionize how business is done on the Internet. Cisco Connection Online is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This highly integrated Internet application is a powerful, easy-to-use tool for doing business with Cisco.

CCO's broad range of features and services helps customers and partners to streamline business processes and improve productivity. Through CCO, you will find information about Cisco and our networking solutions, services, and programs. In addition, you can resolve technical issues with online support services, download and test software packages, and order Cisco learning materials and merchandise. Valuable online skill assessment, training, and certification programs are also available.

Customers and partners can self-register on CCO to obtain additional personalized information and services. Registered users may order products, check on the status of an order and view benefits specific to their relationships with Cisco.

You can access CCO in the following ways:

You can e-mail questions about using CCO to cco-team@cisco.com.

Technical Assistance Center

The Cisco Technical Assistance Center (TAC) is available to warranty or maintenance contract customers who need technical assistance with a Cisco product that is under warranty or covered by a maintenance contract.

To display the TAC web site that includes links to technical support information and software upgrades and for requesting TAC support, use www.cisco.com/techsupport.

To contact by e-mail, use one of the following:

Language
E-mail Address

English

tac@cisco.com

Hanzi (Chinese)

chinese-tac@cisco.com

Kanji (Japanese)

japan-tac@cisco.com

Hangul (Korean)

korea-tac@cisco.com

Spanish

tac@cisco.com

Thai

thai-tac@cisco.com

In North America, TAC can be reached at 800 553-2447 or 408 526-7209. For other telephone numbers and TAC e-mail addresses worldwide, consult the following web site: http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml.

Documentation Feedback

If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco.

You can e-mail your comments to bug-doc@cisco.com.

To submit your comments by mail, for your convenience many documents contain a response card behind the front cover. Otherwise, you can mail your comments to the following address:

Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate and value your comments.

Access Registrar, AccessPath, Are You Ready, ATM Director, Browse with Me, CCDA, CCDE, CCDP, CCIE, CCNA, CCNP, CCSI, CD-PAC, CiscoLink, the Cisco NetWorks logo, the Cisco Powered Network logo, Cisco Systems Networking Academy, Fast Step, FireRunner, Follow Me Browsing, FormShare, GigaStack, IGX, Intelligence in the Optical Core, Internet Quotient, IP/VC, iQ Breakthrough, iQ Expertise, iQ FastTrack, iQuick Study, iQ Readiness Scorecard, The iQ Logo, Kernel Proxy, MGX, Natural Network Viewer, Network Registrar, the Networkers logo, Packet, PIX, Point and Click Internetworking, Policy Builder, RateMUX, ReyMaster, ReyView, ScriptShare, Secure Script, Shop with Me, SlideCast, SMARTnet, SVX, TrafficDirector, TransPath, VlanDirector, Voice LAN, Wavelength Router, Workgroup Director, and Workgroup Stack are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, Empowering the Internet Generation, are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, Cisco, the Cisco Certified Internetwork Expert Logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Collision Free, Enterprise/Solver, EtherChannel, EtherSwitch, FastHub, FastLink, FastPAD, IOS, IP/TV, IPX, LightStream, LightSwitch, MICA, NetRanger, Post-Routing, Pre-Routing, Registrar, StrataView Plus, Stratm, SwitchProbe, TeleRouter, are registered trademarks of Cisco Systems, Inc. or its affiliates in the U.S. and certain other countries.

All other brands, names, or trademarks mentioned in this document/website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any of its resellers. (0008R)

Copyright © 2000, Cisco Systems, Inc.
All rights reserved.


hometocprevnextglossaryfeedbacksearchhelp
Posted: Wed Sep 27 12:14:46 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.