|
|
The vpn tunnel command directs the device to establish or disconnect a VPN LAN-to-LAN tunnel for a specified VPN port without restarting the device. In order for this command to work, the KeyManage keyword must be set to Initiate in the Tunnel Partner section for the VPN port.
The show vpn runtime command will display a list of all currently active VPN tunnels.
vpn tunnel {up | down} vpn_number
vpn_number | The VPN number you specified in the Tunnel Partner section. |
| Command | Description |
|---|---|
configure Tunnel Partner | Configures the LAN-to-LAN tunnel parameters |
show vpn | Shows VPN configuration and statistics |
Posted: Wed Sep 27 11:39:23 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.