show system

show system

Syntax Description

Related Commands

show system

The show system commands display system-related parameters, status and statistics. Much of the information displayed by these commands is also displayed by the show version command.

show system {hardware | info | uptime |
ethernet {addresses | statistics} |
serial [Status] |
log {config | buffer [Delta] [lines]}}

hardware

The show system hardware command displays the hardware configuration of the system.

info

The show system info command displays administrative information about the system. This is informational data that will be returned to automated network queries from SNMP or certain AppleTalk echo requests (see the SNMP section for more information).

uptime

The show system uptime command displays the length of time the router has been running.

ethernet {addresses | statistics}

addresses displays the Ethernet (MAC) addresses of all Ethernet interfaces in the system.

statistics displays current statistics for each Ethernet interface. The displayed counters include transmit and receive packets, receive interrupts and error conditions.

serial [Status]

This command displays the configuration of the serial ports. The Status option shows the runtime configuration of the serial ports.

log {config | buffer [Delta] [lines]}

config displays the runtime and edited log configuration. Configuration information includes the system-wide log level and output options for the log messages. Log messages can be sent to the AUX port (system console) or to a remote syslog daemon. All messages with a higher priority than the log level will be stored in an internal log buffer.

buffer displays the contents of the internal log buffer.

The lines option limits the display to the most recent log messages up to the specified number of lines.

The display will normally timestamp the messages with the time in seconds since boot or with the actual time if the system time server has been set (see the Time Server section). With the optional keyword Delta, the messages will be displayed in a delta format where the interval between log messages is shown.

hardware	The show system hardware command displays the hardware configuration of the system.
info	The show system info command displays administrative information about the system. This is informational data that will be returned to automated network queries from SNMP or certain AppleTalk echo requests (see the SNMP section for more information).
uptime	The show system uptime command displays the length of time the router has been running.
ethernet {addresses \| statistics}	addresses displays the Ethernet (MAC) addresses of all Ethernet interfaces in the system. statistics displays current statistics for each Ethernet interface. The displayed counters include transmit and receive packets, receive interrupts and error conditions.
serial [Status]	This command displays the configuration of the serial ports. The Status option shows the runtime configuration of the serial ports.
log {config \| buffer [Delta] [lines]}	config displays the runtime and edited log configuration. Configuration information includes the system-wide log level and output options for the log messages. Log messages can be sent to the AUX port (system console) or to a remote syslog daemon. All messages with a higher priority than the log level will be stored in an internal log buffer. buffer displays the contents of the internal log buffer. The lines option limits the display to the most recent log messages up to the specified number of lines. The display will normally timestamp the messages with the time in seconds since boot or with the actual time if the system time server has been set (see the Time Server section). With the optional keyword Delta, the messages will be displayed in a delta format where the interval between log messages is shown.

Related Commands

Command Description

configure Time Server

Configures the concentrator for communication with a time server

show version

Shows general device information

Command	Description
configure Time Server	Configures the concentrator for communication with a time server
show version	Shows general device information

Table of Contents

show system

Syntax Description

Related Commands