cc/td/doc/product/aggr/vpn5000/5000sw/conc52x/ref52x
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Show Commands

Show Commands

This chapter lists show commands.

show all

The show all command displays most of the system configuration and status. The information displayed by this command is displayed by other show commands. Please refer to the referenced commands for specific information about the displayed information.

The information displayed varies with the hardware platform and the software configuration.

show all [verbose]

Syntax Desciption

verbose

This option causes the command to display even more information.

Usage Guidelines

The following is a list of the information displayed:

General Information

This section displays general system configuration information. The same information is displayed with the show version verbose command.

IP Configuration

This section displays the IP routing configuration. The same information is displayed with the show ip config command.

IPX Configuration

This section displays the IPX routing configuration. The same information is displayed with the show ipx config command.

AppleTalk Configuration

This section displays the AppleTalk routing and tunnel configurations. The same information is displayed with the show appletalk config and show appletalk tunnels commands.

WAN/PPP Configuration

This section displays the WAN port and PPP protocol configuration. The same information is displayed with the show wan serial config, show wan connect config, and show ppp lcp commands.

VPN Group

This section displays the VPN Group configuration. The same information is displayed with the show vpn config command.

Bridge/Spanning Tree Configuration

This section displays the bridge and Spanning Tree protocol configuration. The same information is displayed with the show bridge config and show bridge spigots commands.

Runtime Status

This section displays the runtime status of the various system interfaces. The same information is displayed with the show os netif command.

Related Commands

Command Description

show appletalk

Shows AppleTalk configuration, status and statistics

show bridge

Shows bridge configuration, status and statistics

show ip

Shows IP configuration and statistics

show os

Shows operating system information

show ppp

Shows PPP information

show version

Shows general device information

show vpn

Shows VPN configuration and statistics

show wan

Shows WAN port information


hometocprevnextglossaryfeedbacksearchhelp
Posted: Wed Sep 27 11:24:21 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.