|
|
These commands clear statistics kept by the device.
reset statistics {ethernet | memory | appletalk | ip | radius |
ethernet | This command clears Ethernet statistics which are displayed by the show ethernet statistics command. |
memory | This command clears buffer usage statistics which are displayed by the show os memory command. |
appletalk | This command clears AppleTalk statistics which are displayed by the show appletalk statistics command. |
ip | This command clears IP, UDP, and ICMP statistics which are displayed by the show ip statistics command. |
radius | This command clears the RADIUS authentication and accounting statistics displayed by the show radius statistics command. |
serial [WAN_port] | This command clears WAN serial statistics which are displayed by the show wan serial statistics command. By specifying the optional WAN_port parameter, only the statistics for that port will be cleared. |
csu [WAN_port] | This command clears WAN CSU statistics which are displayed by the show wan csu statistics command. By specifying the optional WAN_port parameter, only the statistics for that port will be cleared. |
connect [WAN_port] | This command clears WAN connection statistics which are displayed by the show wan connect statistics command. By specifying the optional WAN_port parameter, only the statistics for that port will be cleared. |
ds3 [WAN_port] | This command clears WAN DS3 statistics which are displayed by the show wan ds3 statistics command. By specifying the optional WAN_port parameter, only the statistics for that port will be cleared. |
hssi [WAN_port] | This command clears WAN HSSI statistics which are displayed by the show wan hssi statistics command. By specifying the optional WAN_port parameter, only the statistics for that port will be cleared. |
ppp [WAN_port] | This command clears WAN PPP statistics which are displayed by the show ppp statistics command. By specifying the optional WAN_port parameter, only the statistics for that port will be cleared. |
frelay [WAN_port] [DLCI] | This command clears Frame Relay statistics which are displayed by the show frelay statistics command. By specifying the optional WAN_port and DLCI parameters, only the statistics for that port and/or DLCI will be cleared. |
| Command | Description |
|---|---|
save | Saves the edited configuration |
show appletalk | Shows AppleTalk configuration, status and statistics |
show ethernet | Shows Ethernet information |
show frelay | Shows Frame Relay configuration and statistics |
show ip | Shows IP configuration and statistics |
show os | Shows operating system information |
show ppp | Shows PPP information |
show radius | Shows RADIUS configuration and statistics |
show statistics | Shows statistics |
show system | Shows general system information |
show wan | Shows WAN port information |
Posted: Wed Sep 27 11:17:58 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.