|
|
The reset resevent command clears restart event information from the router's memory. A restart condition occurs when the router detects an error condition from which is cannot gracefully recover. The router stores the error and other memory registers in a "safe" place in memory and then automatically restarts. After restart, information relevant to the restart condition can be accessed by the show os resevent command.
You may also clear the restart information by powering the router off and back on again.
reset resevent
| Command | Description |
|---|---|
show os | Shows operating system information |
Posted: Wed Sep 27 11:17:59 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.