|
|
The reset config command is used to reset the current configuration information in the router. This command should be used during editing if you wish to erase all of your changes and return to the configuration information stored in the Flash ROM.
This command takes effect immediately.
reset config [default]
default | The configuration information will be set to factory defaults. |
To clear all changes in the presently edited configuration, type:
reset config
To set the editing configuration to factory defaults, type:
reset config default
| Command | Description |
|---|---|
save | Saves the edited configuration |
Posted: Wed Sep 27 11:14:26 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.