Table of Contents

reset appletalk

Syntax Description
Related Commands

Reset Commands

This chapter lists reset commands.

reset appletalk

The reset appletalk commands delete runtime AppleTalk parameters.

Syntax Description

statistics	This command resets the DDP (Datagram Delivery Protocol) tallies kept for AppleTalk.
routing {network_number | all}	This command deletes AppleTalk dynamic routing table entries. Direct connect entries cannot be deleted. The show appletalk routing command will display the routing table. The network_number is the AppleTalk network number of the entry to delete. It must be between 1 and 65279. In the case of networks specified by a range, use the beginning number of the range. all deletes all entries.
cache {network_number | all}	This command deletes entries from the AppleTalk fast-routing cache. Use the show appletalk cache command to display the cache. The network_number is the AppleTalk network number of the entry to delete. It must be between 1 and 65279. In the case of networks specified by a range, use the beginning number of the range. all deletes all entries.

Related Commands

Command	Description
configure AppleTalk	Configures AppleTalk parameters for an interface
interface	Sets current interface
show appletalk	Shows AppleTalk configuration, status and statistics

Posted: Wed Sep 27 11:11:24 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.