|
|
This section sets where to send SNMP Traps. Traps are messages sent by the device to an SNMP console.
configure SNMP Trap IP_address
IP_address | The IP address of the SNMP console to which the device will transmit a Trap message whenever one is generated. It should be entered in standard IP dotted-decimal notation (e.g., 198.41.9.1). |
After entering the configure command for the section, enter one or more of the following keywords.
Name = String | The Name keyword is the name of the Community String on the SNMP console to which the Trap message will be sent. This Community String is a string associated with an administrator (or administrators) who have access to the SNMP console. |
In the following examples, the Community String "Info Services" will receive SNMP Traps at 192.168.41.2, while "Tech Support" can receive Traps at any console.
[ SNMP Trap "0.0.0.0" ] Name = "Tech Support" [ SNMP Trap "192.168.41.2" ] Name = "Info Services"
| Command | Description |
|---|---|
configure SNMP | Configures SNMP parameters |
configure SNMP Community String | Configures SNMP Community Strings, which are groups of administrators who have access to the device via an SNMP console |
Posted: Wed Sep 27 10:50:10 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.