|
|
This chapter describes how to configure IPX routing for each interface. To configure IPX filters, see the IPX and IPX Filter sections in the Cisco VPN 5000 Concentrator Series Command Reference Guide.
Turning on routing is usually all that is required. For other options, see the IPX section in the Cisco VPN 5000 Concentrator Series Command Reference Guide. To turn on routing, follow these steps:
| Command | Purpose | |
|---|---|---|
Step 1 | configure IPX {Ethernet | WAN}
slot:port
| Identifies the port for which you want to enable routing. |
Step 2 | Mode = Routed | Turns on routing. |
Posted: Wed Sep 27 09:57:23 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.