|
|
This chapter describes how to configure AppleTalk routing for each interface. To configure AppleTalk filters, see the AppleTalk and AppleTalk Filter sections in the Cisco VPN 5000 Concentrator Series Command Reference Guide.
Turning on routing is usually all that is required. For other options, see the AppleTalk section in the Cisco VPN 5000 Concentrator Series Command Reference Guide. To turn on routing, follow these steps:
| Command | Purpose | |
|---|---|---|
Step 1 | configure AppleTalk {Ethernet |
WAN} slot:port
| Identifies the port for which you want to enable routing. |
Step 2 | Mode = Routed | Turns on routing. |
Posted: Wed Sep 27 10:14:58 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.