Table of Contents

Symbols
Numerics
A
B
C
D
E
F
I
K
L
M
N
O
P
Q
R
S
T
U
V
W

index

Symbols

\\ (inserting a backslash in a chat script)     10 -19

\b (sending a break character in a chat script)     10 -19

\c (don't add carriage return in chat script)     10 -19

\n (inserting a new line in a chat script)     10 -19

\p (.3 second pause in a chat script)     10 -19

\q (setting quiet mode in a chat script)     10 -19

\r (insert a carriage return in a chat script)     10 -19

\ space (inserting a space in a chat script)     10 -19

\t (insert a tab in a chat script)     10 -19

\x (insert a hex digit in a chat script)     10 -19

Numerics

802.2 IPX frame type

Bridge     3 -10

Ethernet     3 -1

802.2 SNAP IPX frame type

Bridge     3 -10

Ethernet     3 -1

802.3 (Raw) IPX frame type

Bridge     3 -10

Ethernet     3 -1

A

AARP (Apple Address Resolution Protocol)     4 -15

ACCM (aysnchronous character control map)     10 -15

adding a device     1 -5

allow connections to     7 -8

allow L2TP     7 -3

allow PPTP     7 -3

ANSI Annex D     10 -7

AppleTalk

Bridge configuration     4 -10

Ethernet configuration     4 -1

filter application window     13 -6

filter editor window     13 -1

input packet filters     13 -6

input route filters     13 -6

LaserWriter filter     4 -15

NBP filter configuration     4 -14

network filters     4 -14

output packet filters     13 -7

output route filters     13 -6

Phase 2 AARP probe time     4 -15

Phase 2 configuration     4 -3

Phase I configuration     4 -1

stay in zone filter     4 -15

tilde filter     4 -15

transitional routing     4 -1

VPN Port configuration     4 -8

WAN bridges and     4 -15

WAN configuration     4 -5

zone filters     4 -15

zone list filters     13 -6

Area Border Router, configuring     15 -3

AT dialing     10 -4

command set     10 -19

modem setup     10 -20

Authentication     6 -6

authentication database     10 -22

dial-back script     10 -23

interfaces allowed     10 -22

password/secret     10 -22

remote name     10 -22

B

backup port, setting     10 -2

block type 20     7 -10

BPDU packets     9 -3

Bridge

aging time     9 -2

AppleTalk

bridge groups     4 -10

configuration     4 -10

AppleTalk Phase 1

configuration     4 -11

NBP filters     4 -12

network number     4 -11

node number     4 -12

routing/off     4 -11

seed status     4 -11

zone name     4 -12

AppleTalk Phase 2

configuration     4 -12

default zone     4 -13

NBP filtering     4 -14

network range     4 -13

node number     4 -14

routing/off     4 -12

seed status     4 -13

zone list     4 -13

Bridge Group     9 -1

DEC LAT     9 -4

DECnet

configuration     5 -3

global configuration     9 -1

IP

address     2 -14

broadcast address     2 -14

options     2 -16

routing/off     2 -14

subnet mask     2 -14

IPX

configuration     3 -10

RIP update timer     3 -11

routing/off     3 -10

SAP update timer     3 -11

LAT, excluding     9 -4

on/off     9 -2

spanning tree     9 -2

forward time     9 -3

hello time     9 -3

max age     9 -3

priority     9 -2

table size     9 -2

Bridge Group     9 -1

Bridge ID     9 -2

C

CCITT Annex A     10 -7

certificates     1 -7, 1 -16, 16 -1

approve/reject     1 -7, 16 -5

configuration     16 -1

export certificate request     16 -4

export request     1 -7

export root certificate     1 -7, 16 -3

generate     16 -2

generate certificate request     1 -7, 16 -4

generate root/server     1 -7

root certificate     16 -2

save configuration     16 -1

server certificate     16 -2

CHAP (challenge handshake access protocol)     10 -10

chat scripts

connect     10 -4

dial-back script     10 -5

dial-out     10 -4

editor     10 -18

examples     10 -20

Chooser, NBP filtering     4 -14

CIDR (Classless Inter Domain Routing)

Bridge     2 -15

Ethernet     2 -3

VPN     2 -11

WAN     2 -6

client packet retry     1 -12

Command Line

Edit box     1 -18

Output window     1 -5

CompatiView options

auto open device     1 -11

auto reload config files     1 -11

Cascade new windows     1 -11

hide secure data     1 -11

IPX or IP operation     1 -11

IPX upon startup     1 -11

compression

PPP address and control     10 -16

PPP protocol     10 -16

concentrator - see VPN - concentrator     7 -1

configuration file

backup     1 -6

downloading     1 -5

generic     1 -3

opening     1 -5

configuring multiple devices     1 -5

Confirm prompt     1 -11

Control menu     1 -13

CSU/DSU's and RS-232 operation     14 -1

current device     1 -3

Customizing

commands     1 -19

toolbars     1 -19

customizing the windows     1 -18

D

database files

master.ini     1 -9

Database Menu     1 -9

Delete Item     1 -9

Item Properties     1 -9

New Device Database     1 -9

Open Device Database     1 -9

Options     1 -10

database options

advanced tab     1 -12

confirmations tab     1 -11

general tab     1 -11

save/restart tab     1 -12

TFTP tab     1 -12

DECnet

area     5 -1

bridge group     5 -3

configuration     5 -1

hello messages     5 -4

hello timer     5 -2

maximum addresses setting     5 -2

node     5 -2

on/off     5 -1

on-demand links and     5 -5

routing/bridging/off     5 -3

routing timer     5 -2

default parameters     1 -5

default password     1 -1

Delete Item menu item     1 -9

device information files     1 -3

Device Information Window     1 -5

device name setting     14 -7

device properties     1 -9

general tab     1 -9

save/restart tab     1 -10

system clock tab     1 -10

Device View Window

delete devices     1 -9

right-clicking in     1 -4

DH (Diffie-Hellman) Group     7 -5

dialing retry count     10 -5

digital certificates     16 -1

display (show) statistics     1 -14

DLCI (data link control identifier)

entry box     10 -8

number setting     10 -9

static settings     10 -7

DNS

primary server     14 -12

secondary servers     14 -12

DNS (domain name server)     14 -12

downloading software     1 -13

TFTP download     1 -13

dynamically determined routes     2 -19

E

edit area     1 -4

enable authentication     6 -5

Ethernet

AppleTalk Phase 1

auto-seed     4 -2

bridging     4 -2

NBP filters     4 -3

node number     4 -3

non-seed     4 -2

routing     4 -2

routing/bridging/off     4 -1

seed     4 -2

seed status     4 -2

zone name     4 -2

AppleTalk Phase 2

auto-seed     4 -4

bridging     4 -3

default zone     4 -4

NBP filters     4 -5

network number range     4 -4

node number     4 -5

non-seed     4 -4

routing     4 -3

routing/bridging/off     4 -3

seed     4 -4

seed status     4 -3

zone name list     4 -4

Bridge

exclude non-routed protocols     9 -4

on/off     9 -4

path cost (spanning tree)     9 -4

priority     9 -4

DECnet

configuration     5 -3

routing/bridging/off     5 -3

IP

address     2 -2

bridging     2 -1, 2 -5

broadcast address     2 -2

options     2 -4

proxy ARP     2 -21

routing     2 -1, 2 -5

routing/bridging/off     2 -1, 2 -5

subnet mask     2 -2

IPX

bridging     3 -2

configuration     3 -1

Frame types     3 -1

RIP update timer     3 -3

routing     3 -2

routing/bridging/off     3 -2

Ethernet 802.2 IPX frame type     3 -1

on a Bridge     3 -10

Ethernet 802.2 SNAP IPX frame type     3 -1

on a Bridge     3 -10

Ethernet 802.3 (Raw) IPX frame type     3 -1

on a Bridge     3 -10

Ethernet Type II IPX frame type     3 -1

on a Bridge     3 -10

examples

AppleTalk Get Zone List filter rule set     13 -5

Appletalk packet filter rule set     13 -5

AppleTalk RTMP filter rule set     13 -5

chat scripts     10 -20

IP packet filter rule set     11 -10

IP route filters     11 -5

IP simple packet filter rule set     11 -10

IPX Route filter rules     12 -7

IPX SAP filters     12 -10

Exclude Local LAN checkbox     7 -3

Exit menu item     1 -8

expect statement     10 -19

exporting

certificate requests     16 -4

chat scripts     10 -19

root certificates     16 -3

F

failover timers, for WAN ports     10 -6

failover type, of WAN ports     10 -2

File Menu     1 -5

Exit     1 -8

Firewall Path     1 -8

New Config     1 -5

Open Config File     1 -5

Print     1 -8

Recent File     1 -8

Save to device     1 -5

Save to File     1 -6

Subinterface     1 -8

View     1 -8

VPN Port     1 -8

File menu

certificates     1 -7

filtering

AppleTalk filter editor window     13 -1

AppleTalk get-zone-list filters     13 -2

AppleTalk packet filters     13 -2

AppleTalk route filters     13 -3

AppleTalk rule modifiers     13 -3

default rule     11 -3

IPX, applying     12 -1

IPX packet filter rules     12 -2

IPX RIP filters     12 -5

IPX SAP packets     12 -7

TCP/IP

applying packet filters     11 -11

configuring     11 -1

TCP/IP filter editor window     11 -2

TCP/IP packet filter rules     11 -5

TCP/IP route filtering rules     11 -3

TCP/IP rule modifiers     11 -4

Firewall

AppleTalk filtering     13 -1

IntraGuard

adding paths     8 -1

advanced path settings     8 -3

allowing ports     8 -8

allowing protocols     8 -8

configuration     8 -1

deleting paths     8 -1

global settings     8 -12

logging     8 -9

renaming paths     8 -1

setting security policies     8 -5

timer settings     8 -12

IP filtering     11 -2

IPX filtering     12 -1

Firewall path menu item     1 -8

Flash ROM

downloading config to     1 -5

reloading after hard erase     1 -13

software updates to     1 -13

TFTP downloads to     1 -13

Frame Relay

AppleTalk address     10 -9

configuration     10 -7

DECnet address     10 -9

home DLCI     10 -7

IP address     10 -9

IPX address     10 -9

maintenance protocol     10 -7

MTU     10 -7

polling frequency     10 -7

static link maintenance     10 -7

I

IARP (Inverse Address Resolution Protocol)     10 -9

IKE

Authentication     6 -5

DH (Diffie Hellman) Group     6 -4

Encryption     6 -5

for Client tunnels     7 -4

for LAN-to-LAN tunnels     6 -3, 6 -5

Key Manage     6 -3

Shared Key     6 -3

Transform     6 -4

IKE Policy

Global setting     7 -16

IntraGuard - see Firewall     8 -1

IP

address configure request     2 -24

Bridge configuration     2 -13

Bridge Group     2 -13

bridging     2 -13

IPSec port configuration     2 -17

network and host portions

Bridge     2 -14

Ethernet     2 -2

IPSec port     2 -18

VPN     2 -10

WAN     2 -6

over Frame Relay     2 -5

periodic operation

VPN     2 -12

WAN     2 -7

proxy ARP     2 -21

remote node address     2 -23

split horizon

VPN     2 -12

WAN     2 -7

triggered operation

VPN     2 -12

WAN     2 -7

Van Jacobson header compression     2 -23

WAN configuration     2 -5

IP Address

Bridge     2 -14

Ethernet     2 -2

IPSec port     2 -18

VPN     2 -10

WAN     2 -5

IP Multiprotocol Predence     2 -24

IPsec Gateway     7 -18

IPSec port

configuring     2 -17

enabling, disabling     2 -17

IP address     2 -18

IP Source Routing     11 -2

IP static routes

destination address     2 -19

gateway address     2 -20

mask     2 -20

metric     2 -20

RIP     2 -20

IP subinterface

adding     1 -8

deleting     1 -8

IPX

blocking type 20 packets

Bridge     3 -12

Ethernet     3 -3

VPN     3 -9

WAN     3 -6

Bridge configuration     3 -10

Bridge Group     3 -9

end-node proxy     3 -6

Ethernet configuration     3 -1

Ethernet Frame Types     3 -1

filter editor window     12 -2

filters, applying     12 -1, 12 -10

network number

Bridge     3 -11

Ethernet     3 -2

VPN     3 -8

WAN     3 -5

numbered interface

Ethernet     3 -2

VPN     3 -8

WAN     3 -4

over Frame Relay     3 -5

over PPP     3 -4

Packet filters

applying     12 -10

rules     12 -2

Route filters

applying     12 -1

rules     12 -5

SAP filters

applying     12 -1

rules     12 -7

IPX or IP operation

to open devices     1 -5

Item Properties menu item     1 -9

K

key management, manual     6 -5

L

L2TP     7 -3

LAN-to-LAN Tunnels

bind-to interface     6 -2

IKE Key Management     6 -3, 6 -5

Interoperability settings     6 -6

Manual Key Management     6 -6

Partner IP address     6 -2

tunnel partners     6 -2

LDAP

enable     14 -27

vpn group attribute     14 -30

LDAP (Lightweight Directory Access Protocol) Server

authentication server settings     14 -29

configuration server settings     14 -26

LDAP configuration     14 -26

link type for WAN interfaces     10 -1

LMI (consortium specification)     10 -7

Local Config View Window     1 -5

local domain names     7 -13

Local IP Net     7 -7

logging

configuration window     14 -25

level, setting     14 -25

packet filter rule notification     11 -9

source-routed packets     11 -2

syslogd     14 -26

to aux port     14 -26

to syslogd     14 -26

Logging configuration     14 -25

M

manual key management     6 -5

master.ini     1 -9

maximum receive unit (MRU)     10 -15

MD5 (Message Digest)     10 -10

menus

Control     1 -13

Database     1 -9

File     1 -5

Help     1 -3

overview     1 -2

Statistics     1 -14

View     1 -19

Window     1 -20

MPP128     7 -3

MPPE40     7 -3

MPPP - see Multilink PPP     10 -16

MRU (Maximum Receive Unit) for PPP     10 -15

MSCHAP     7 -17

MTU (Maxiumum Transmission Unit)     10 -7

Multilink PPP

Bundle, creating     10 -17

configuration     10 -16

virtual port, creating     10 -17

N

name (device)     14 -7

NAT

allow ICMP     14 -22

allow mgmnt thru router ports     14 -21

enable     14 -20

NAT(Network Address Translation)

one-to-one translation pairs     14 -23

range, setting     14 -22

timeouts     14 -21

NAT (Network Address Translation) configuration     14 -19

NAT Mapping Section

syntax     14 -23

NAT Maps     14 -23

NBP filter configuration     4 -14

NetBEUI, excluding     9 -4

NetBT     7 -4

New Config menu item     1 -5

New Device Database menu item     1 -9

non-routed protocols     9 -4

O

ommunity     14 -10

Open Config File menu item     1 -5

Open Device Database menu item     1 -9

Options dialog box     1 -10

Options menu item     1 -10

OSPF     1 -16, 2 -4, 2 -12

Area Border Router     15 -3

Area ID     15 -2

Area Name configuration     15 -4

Enabling     15 -2

route aggregation     2 -26

Stub Area     15 -5

Virtual Link     15 -6

OSPF (Open Shortest Path First)

Bridge     2 -15

Ethernet     2 -3

VPN     2 -11

WAN     2 -7

OSPF (Open Shortest Path First) configuration     15 -1

Output window     1 -4

P

PAP (password authentication protocol)     10 -11

password

default     1 -1

enable     14 -8

lost password - what to do     14 -8

setting     14 -8

storing in CompatiView     1 -11

Perfect Forward Secrecy (PFS)

for LAN-to-LAN tunnels     6 -4

for VPN client tunnels     7 -4

Ping, using DNS name     14 -12

PPP (point-to-point protocol)

echo packets     10 -15

IP address configure request     2 -24

IP numbered interface     2 -5

link quality     10 -14

options     10 -14

WAN link     10 -2

PPTP     7 -3

PPTP client connections     7 -17

Print menu item     1 -8

protocol precedence     2 -24

PVC (permanent virtual circuit)     10 -8

Q

quickstart     1 -1

R

RADIUS

accounting     14 -15

bind-to     14 -15

RADIUS (Remote Authentication Dial In User Service)

and authentication database     10 -22

and CHAP authentication     10 -10

Assigning IP Addresses     7 -8

Assigning IPX addresses     7 -10

authentication     14 -15

PAP authentication secret     14 -16

secret     14 -17

server address     14 -16

VPN attribute numbers     14 -15

VPN authentication     14 -16

RADIUS configuration     14 -14

Raw IPX frame type

Bridge     3 -10

Ethernet     3 -1

Recent File menu item     1 -8

request certificates     16 -5

Restart menu item     1 -13

retries

for CompatiView     1 -12

WAN

dialing delay setting     10 -5

WAN connect     10 -5

right-clicking     1 -4

RIP

and IP static routes     2 -20

for IPX Bridge Groups     3 -11

for IPX Ethernet     3 -3

for IPX VPN     3 -8

for IPX WAN     3 -5

Input RIP checkbox

Bridge     2 -15

Ethernet     2 -4

VPN     2 -12

WAN     2 -7, 2 -8

Output RIP checkbox

Bridge     2 -15

Ethernet     2 -3, 2 -4

VPN     2 -12

WAN     2 -7, 2 -8

poison reverse

Bridge     2 -16

Ethernet     2 -3

VPN     2 -12

WAN     2 -7

RIP 1 for IP

Bridge     2 -15

Ethernet     2 -2

VPN     2 -11

WAN     2 -6

RIP 2 for IP

Bridge     2 -15

Ethernet     2 -3

VPN     2 -11

WAN     2 -6

RIP 2 password     2 -24

split horizon

Bridge     2 -15

Ethernet     2 -3

VPN     2 -12

WAN     2 -7

root certificate     16 -2

route redistribution     2 -25

Routing Protocols

IP

Ethernet     2 -2

VPN     2 -11

WAN     2 -6

S

SAP update interval     1 -12

SAP Update Timer

Ethernet     3 -3

for IPX Bridge Groups     3 -11

Save/Restart options     1 -6

Save Secrets, for VPN Client Tunnels     7 -5

Save to Device menu item     1 -5

Save to File menu item     1 -6

script timeout setting     10 -5

SecurID

bind-to     14 -19

enabling     14 -18

in VPN group config     7 -12

server address     14 -18

SecurID configuration     14 -18

send statement     10 -19

server certificate     16 -2

server packet retry     1 -12

show statistics     1 -14, 1 -18

SLA (Service Level Agreement)     7 -4

SMDS (Switched Multi-megabit Data Service)

configuration     10 -13

SNMP, Advanced

community strings     14 -10

enabling     14 -9

sets, enabling     14 -10

traps, configuring     14 -11

traps, enabling     14 -10

SNMP configuration     14 -8

source routing

filtering     11 -2

logging rejected packets     11 -2

spanning tree     9 -2

split horizon

VPN     2 -12

spoof attacks, preventing

Bridge     2 -16

Ethernet     2 -4

VPN     2 -12

WAN     2 -8

Start IP Address     7 -7

Statistics menu     1 -14

statistics menu

certificates     1 -16

OSPF     1 -16

RADIUS     1 -17

vpn     1 -17

Subinterface menu item     1 -8

subnet mask, classes of     2 -2

Switched Multi-megabit Data Service - see SMDS     10 -13

system clock     1 -10

System Info configuration     14 -7

T

T1 CSU/DSU - built in     14 -3

TCP/IP

Bridge packet filters     11 -11

default filtering rule     11 -3

Ethernet packet filters     11 -11

filter editor window     11 -2

filtering rule modifiers     11 -4

global route filters     11 -1

main filtering window     11 -1

packet filter rules     11 -5

packet filters     11 -1

route filtering rules     11 -3

route filters     11 -1

VPN Port packet filters     11 -11

WAN packet filters     11 -11

terminal adapters and RS-232 operation     14 -1

TFTP download     1 -13

time server configuration     14 -13

Traceroute, using DNS name     14 -12

Transform

for VPN Groups     7 -4

Transit Area, configuring     15 -7

Tunneling

LAN-to-LAN     6 -1

VPN Client     7 -1

tunneling - see also, VPN - concentrator     7 -1

tunnel NetBT     7 -4

Type II IPX frame type

Bridge     3 -10

Ethernet     3 -1

U

UDP

forwarding agents     2 -22

ports/protocols for forwarding     2 -22

server IP address     2 -22

unroutable protocols     9 -4

User Authentication Database     10 -5

V

V.25bis

CIC (connect incoming call)     10 -20

CNX (other end answered)     10 -20

command set     10 -20

CRN (originate a call)     10 -20

dialing     10 -4

INV (invalid command)     10 -20

V.54 loopback in T1 CSU/DSU     14 -5

View menu item     1 -8

Views

Command Line Output     1 -5

Device Information     1 -5

Local Config View     1 -5

moving display window     1 -19

VPN     1 -17

concentrator

authentication secret     7 -16

binding port     7 -2

current VPN group     7 -2

DNS redirection     7 -13

encryption secret     7 -16

group config assigned to user     7 -16

group configurations     7 -1

inactivity timeout     7 -3

IP Connection     7 -7

IP input filters     7 -9

IP output filters     7 -9

IPX Connection     7 -10

IPX input filters     7 -11

IPX output filters     7 -11

keepalive interval     7 -2

max connections     7 -2

new group configuration     7 -2

rollover device     7 -12

SecurID for group config     7 -12

shared key     7 -16

user database     7 -15

user name     7 -15

WINS redirection     7 -14

Tunnel Partner     6 -1, 6 -2

VPN Configuration     2 -9

VPN Port

AppleTalk

bridging     4 -8

configuration     4 -8

network number     4 -9

periodic operation     4 -9

routing     4 -8

routing/bridging/off     4 -8

triggered operation     4 -9

update method     4 -9

zone name     4 -9

Bridge

exclude non-routed protocols     9 -4

on/off     9 -4

path cost (spanning tree)     9 -4

priority     9 -4

IP

address     2 -10

bridging     2 -9

broadcast address     2 -10

numbered interface     2 -10

routing     2 -9

routing/bridging/off     2 -9

subnet mask     2 -10

update method     2 -11

IPX

bridging     3 -7

configuration     3 -7

numbered interface     3 -8

periodic operation     3 -8

RIP update timer     3 -8

routing     3 -7

routing/bridging/off     3 -7

SAP update timer     3 -8

triggered operation     3 -8

update method     3 -8

VPN Port menu item     1 -8

VPN Ports

adding     6 -1

configuring     6 -1

deleting     6 -1

W

WAN

allow dial in     10 -2, 10 -3

allow dial out     10 -2, 10 -3

always keep link up     10 -3

AppleTalk

bridging     4 -5

configuration     4 -5

network number     4 -6

node number     4 -6

numbered interface     4 -6

optional remote end node parameters     4 -7

periodic operation     4 -7

routing     4 -5

routing/bridging/off     4 -5

triggered operation     4 -7

update method     4 -7

zone name     4 -6

AT command set     10 -19

AT dialing     10 -4

authentication database     10 -22

backup port for failover     10 -2

Bridge

exclude non-routed protocols     9 -4

on/off     9 -4

path cost (spanning tree)     9 -4

priority     9 -4

CHAP     10 -10

and RADIUS     10 -10

name     10 -11

requesting     10 -10

responding     10 -11

secret     10 -11

chat script     10 -5

compression     10 -14

connect script     10 -4

DECnet

configuration     5 -4

hello timer     5 -4

routing/bridging/off     5 -4

routing timer     5 -5

dedicated PPP link     10 -2

dial-back script     10 -4

for AT dialing     10 -4

for V.25bis dialing     10 -4

dialing method     10 -4

dialing retry count     10 -5

dial-out script     10 -4

for AT dialing     10 -4

for V.25bis dialing     10 -4

DS3 ports

bandwidth settings     14 -7

CRC setting     14 -6

data inversion     14 -7

line build out     14 -6

expect statements     10 -5

failover operation type     10 -2

failover timers button     10 -3

failover timers configuration     10 -6

Frame Relay

AppleTalk address     10 -9

configuration     10 -7

DECnet address     10 -9

DLCI

entry box     10 -8

number setting     10 -9

static settings     10 -7

IARP     10 -9

IP address     10 -9

IPX address     10 -9

link, setting     10 -2

maintenance protocol     10 -7

polling frequency     10 -7

PVC     10 -8

static link maintenance     10 -7

Frame Relay link     10 -2

inactivity timer     10 -3

interface on/off     10 -1

IP

address     2 -5

broadcast address     2 -6

numbered interface     2 -5

subnet mask     2 -6

update method     2 -7

IPX

bridging     3 -4

configuration     3 -4

network number     3 -5

numbered interface     3 -4

optional remote node network number     3 -6

periodic operation     3 -5

RIP update timer     3 -5

routing     3 -4

routing/bridging/off     3 -4

SAP update timer     3 -5

triggered operation     3 -5

update method     3 -5

link configuration     10 -1

link type     10 -1

on-demand PPP link     10 -2

PAP     10 -11

name     10 -12

password     10 -13

requesting authentication     10 -12

responding to requests     10 -12

PPP

link quality     10 -14

options     10 -14

RADIUS     10 -22

retry delay setting     10 -5

RS-232 ports

async operation     14 -1

baud rate     14 -2

configuration     14 -1

flow control     14 -2

hardware handshake     14 -2

internal clock     14 -1

sync operation     14 -1

xon/xoff     14 -2

script timeout     10 -5

T1 CSU/DSU

channel data rate     14 -4

clock scheme     14 -3

fractional operation     14 -4

framing type     14 -3

inverting data     14 -4

line buildout     14 -5

line encoding type     14 -4

loopback     14 -5

master mode operation     14 -3

Performance Report Messages     14 -5

slave mode operation     14 -3

V.54 loopback     14 -5

T1 ports

configuration     14 -3

V.25 bis command set     10 -20

V.25 bis dialing     10 -4

V.35 / X.21 ports

baud rate     14 -6

configuration     14 -5

internal clock     14 -5

Windows

IPX or IP operation     1 -2

system requirements     1 -2

windows, CompatiView's

docking     1 -18

Output     1 -4

workbook mode     1 -3

Posted: Wed Sep 27 12:13:36 PDT 2000
Copyright 1989-2000©Cisco Systems Inc.